[DXLog.net - Support] MMVARI setup
Patrick EGLOFF
patrick.egloff at outlook.com
Mon Oct 7 17:33:42 CEST 2013
OK Chris,
Sounds logical !There are probably other settings that would be needed to save... I'm not a big digimodes fan.
73, Patrick.
Date: Mon, 7 Oct 2013 08:59:34 +0200
Subject: Re: [DXLog.net - Support] MMVARI setup
From: 9a5k at 9a5k.com
To: patrick.egloff at outlook.com
CC: uschneid at posteo.de; support at dxlog.net
Hi Patrick.
Actually, some MMVARI properties are saved in DXLog.net config file, but not all of them.
I will add RX frequency as well as mode, but please note that mode will be restored only if actual contest file allow such mode.
If not, first allowed digi mode will be set.
For example, if you're working in RTTY only contest, mode will be remembered as RTTY.
But, if you open PSK only contest, mode in MMVARI would be set as bpsk...
73,
Chris - 9A5K
On Mon, Oct 7, 2013 at 7:20 AM, Patrick EGLOFF <patrick.egloff at outlook.com> wrote:
Hello Ulf,
I looked in the DXLog config file, but couldn't find anything close to what i'm looking for...- default tuning display- RX frequency
It would be much more appropriate to use the default MMVARI ini file...
Thanks and 73,Patrick
> Date: Mon, 7 Oct 2013 06:56:21 +0200
> From: uschneid at posteo.de
> To: support at dxlog.net
> Subject: Re: [DXLog.net - Support] MMVARI setup
>
> Hi Patrick,
>
> playing around with the MMVARI settings in the config file may help.
>
> Search for "MMVARI" in this file (Windows 7):
> C:\Users\[your_user_name]\AppData\Roaming\DXLog.net\DXLog.net.config
>
> You find settings like
> <add key="MMVARIFreqCorrection" value="1" />
> <add key="MMVARIFSKPort1" value="None" />
>
> 73
> Ulf DK5TX
>
>
> On Mon, 7 Oct 2013 06:46:32 +0200 Patrick EGLOFF
> <patrick.egloff at outlook.com> wrote:
> > Has anyone a solution to that
> > problem ?------------------------------------Date: Sat, 5 Oct 2013
> > 21:51:07 +0200From: Patrick EGLOFF <patrick.egloff at outlook.com> To:
> > "support at dxlog.net" <support at dxlog.net> Subject: [DXLog.net -
> > Support] MMVARI setup
> >
> > Hi !
> > Is there a way to keep the settings made in MMVARI ?Each time i start
> > DXLog, the settings made in previous session (mode, RX frequency,
> > etc..) are lost. 73, Patrick
> > _______________________________________________ Support mailing list
> > Support at dxlog.net
> > http://www.dxlog.net/mailman/listinfo/support
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support
_______________________________________________
Support mailing list
Support at dxlog.net
http://www.dxlog.net/mailman/listinfo/support
More information about the Support
mailing list