[DXLog.net - Support] SO2R Feature request: Independent CW speeds for Radio 1 and Radio 2

9A5K 9a5k at 9a5k.com
Fri Sep 13 08:42:15 CEST 2013


That's really good idea Bob.

Maybe some shortcut to syncspeed will be fine too..
We can add that later too.

Chris - 9A5K

On Thu, Sep 12, 2013 at 11:37 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:

> Quite often you are running a pileup at high speed on Radio 1, and you want
> to call a multiplier at slower speed on Radio 2.  It would be nice if
> DXLog.net could support independently adjustable CW speeds for each radio.
>  Of course, this has to work the same whether you are using Winkey, LPT, or
> COM port keying.
> It would also be nice if the current CW speed(s) and REPEAT mode were
> indicated in a separate dedicated window with adjustable font size, instead
> of being fixed at the bottom of the Rate window, so it could be placed off
> to the side.
> Some new text commands and/or Operating menu items might be useful too:
> NOSYNCW - Radio 1 and Radio 2 CW speeds are independent of each other
> SYNCCW - Radio 1 and Radio 2 CW speeds are synchronized (the default, like
> today)
> SYNCSPEED - Assigns the active radio's current CW speed to the other radio
> Ctrl+Alt+F9, AltGr+F9 / Ctrl+Alt+F10, AltGr+F10 / Ctrl+Alt+V, AltGr+V could
>  be used to change CW speed on the inactive radio.  (I will probably map
> these to Shift+PageUp and Shift+PageDown using DEFINEKEYS).
> 73,
> Bob, N6TV
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support

More information about the Support mailing list