[DXLog.net - Support] Σχετ: Support Digest, Vol 4, Issue 10

Νίκος Βαλμάς sv1doo at yahoo.gr
Sat Sep 14 09:08:08 CEST 2013


Hi Chris.
Tnx for replayed.
I have the follow steps.
Options-Configure interface. In the new window Printer port Enable-set up-click Band data - Active radio-cw and ptt and radio 1 then in previous window serial port (1 as i use) - Device Radio 1and click in setup. 
In the new window Radio icom 746 speed 19200-Bits 8-Parity N - stop 1-DTR and RTS i choose different choice foot switch None and  Active with Radio 1.
Finally i switch off the program i show the follow warning.
Unhandled exception has occured in your application.If you click continue the application will ignore this error and attempt to continue. If you click Quit the application will close immediately. Only True Type fonts are supported. This is not a True Type fonts.
Many thanks to you Chris for you time.
Vy 73
sv1doo
Nick




________________________________
 Απο: "support-request at dxlog.net" <support-request at dxlog.net>
Προς: support at dxlog.net 
Στάλθηκε: 12:32 μ.μ. Παρασκευή, 13 Σεπτεμβρίου 2013
Θέμα: Support Digest, Vol 4, Issue 10
 

Send Support mailing list submissions to
    support at dxlog.net

To subscribe or unsubscribe via the World Wide Web, visit
    http://www.dxlog.net/mailman/listinfo/support
or, via email, send a message with subject or body 'help' to
    support-request at dxlog.net

You can reach the person managing the list at
    support-owner at dxlog.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Support digest..."


Today's Topics:

   1. Re: ????: Support Digest, Vol 4, Issue 8 (9A5K)
   2. Feature Requests or wishes ... (PeterK)
   3. Add contest (SA6AQP .)
   4. Re: Freeze of DXlog during import of ADIF (9A5K)
   5. Re: Add contest (9A5K)


----------------------------------------------------------------------

Message: 1
Date: Fri, 13 Sep 2013 11:00:02 +0200
From: 9A5K <9a5k at 9a5k.com>
To: ????? ?????? <sv1doo at yahoo.gr>
Cc: "support at dxlog.net" <support at dxlog.net>
Subject: Re: [DXLog.net - Support] ????: Support Digest, Vol 4, Issue
    8
Message-ID:
    <CAD8hgPgr+uTbSG-RJ9fnzMmCefbtSHbAv43Oa=hTAiocuiuyzg at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-7

Hi Nick...

Could you please check which CI-V address is on your IC-746?
DXLog.net currently using default CI-V address for ICOM radios, which
depends on model.

I will add new field in Radio setup screen where it will be possible to
change CI-V address in the config.

73,
Chris - 9A5K



On Fri, Sep 13, 2013 at 10:17 AM, ????? ?????? <sv1doo at yahoo.gr> wrote:

> Hi to dxlog users.
> I have installed ver. 2.0.11 and i have problem with set up interface.
> I use windows xp pro (reg) ic-746 the program work fine but my radio
> refuse cooperate with the program.
> Also where can i can download the help file?
> Any help welcome.
> vy 73
> sv1doo/Nick
>
>
>
>
> ________________________________
>  ???: "support-request at dxlog.net" <support-request at dxlog.net>
> ????: support at dxlog.net
> ????????: 9:42 ?.?. ?????????, 13 ??????????? 2013
> ????: Support Digest, Vol 4, Issue 8
>
>
> Send Support mailing list submissions to
>    support at dxlog.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
>    http://www.dxlog.net/mailman/listinfo/support
> or, via email, send a message with subject or body 'help' to
>    support-request at dxlog.net
>
> You can reach the person managing the list at
>    support-owner at dxlog.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Support digest..."
>
>
> Today's Topics:
>
>    1. DX-Cluster announcements clicking (Oliver Grossmann)
>    2. Roadmap (Oliver Grossmann)
>    3. Re: DX-Cluster announcements clicking (9A5K)
>    4. SO2R Feature request: Independent CW speeds    for Radio 1 and
>       Radio 2 (Bob Wilson, N6TV)
>    5. show DUPE in LOG (SOUZKABEL)
>    6. Re: show DUPE in LOG (Bob Wilson, N6TV)
>    7. No grab from N+1 and Check Partials (SOUZKABEL)
>    8. Re: show DUPE in LOG (9A5K)
>    9. Re: SO2R Feature request: Independent CW speeds for Radio 1
>       and Radio 2 (9A5K)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 12 Sep 2013 18:00:48 +0200
> From: Oliver Grossmann <olli at bretzi.de>
> To: Support at dxlog.net
> Subject: [DXLog.net - Support] DX-Cluster announcements clicking
> Message-ID: <5231E530.6040203 at bretzi.de>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi Chris,
> I tested just 2.0.11 after i installed last weekend Version 2.0.10.
> Looks very nice for me. Thank you for all your work.
>
> I found one odd thing:
>
> If i click on a DX-Cluster announcements with a single click. It is not
> possible to double click on this spot any more if you are staying with
> the mouse on the same field.
>
> An Example:
> If i first single click on the frequency and after i double click on the
> belonging call, everything works as expected, but if i first single
> click on the frequency and double click the frequency field after some
> moments, nothing happend.
>
> Also i discovered if you single click twice in a field of the DX-Cluster
> announcements, you can edit it.
>
> I guess it is just a matter of a locking the content with a flag.
>
> Thanks
>
> Olli, DH2WQ
>
> ------------------------------------------------------------------------
> Oliver Grossmann | DH2WQ | oliver.grossmann at bretzi.de
>
> On 11.09.2013 20:41, 9A5K wrote:
> > Hi everyone.
> >
> > Version 2.0.11 is now available for public download.
> >
> > There are some bugfixes from last days and there are some new features
> > added.
> >
> > Any feedback specially regarding QTC's before WAEDC this weekend is
> really
> > welcome.
> >
> > Here is a short c/p from release notes:
> >
> > - Double click on Check callsign or Check multipliers data now
> immediately
> > scrolls log to clicked qso.
> > - Tools->Repeat loop option was broken (txt command was OK). Fixed now.
> > (TNX DK5TX)
> > - Redefine keys wasn't working properly when destination key included
> Shift
> > modifier. Fixed now. (TNX DK5TX)
> > - OmniRig is now supported.
> > - ADIF import is redesigned and optimized for faster import.
> > - The hyphen or minus key (-) quickly activates/deactivates Split mode.
> > - Command line arguments "-n" or "--noautoload" can be specifed to
> override
> > Load contest at startup option.
> > - WAEDC contest - DX side QTC sending is now enabled.
> > - WAEDC contest - added info messages for number of QTCs
> > available/received/sent/in stock etc.
> > - Floating windows option was broken. Now fixed. (TNX DF1LX)
> > - Check multipliers window data was display only for MULT1 field. Now it
> > uses first field in sequence MULT1, MULT2, MULT3
> >    which isn't empty. (TNX DK5TX)
> > - QTC network messages added. QTC synchronization is on and data is
> > synchronized between stations in network.
> > - Options->Log->Fonts->Large wasn't properly restored after log opening.
> > Fixed. (TNX G4BYG)
> >
> > More to come soon..
> >
> > 73,
> > Chris - 9A5K
> > _______________________________________________
> > Support mailing list
> > Support at dxlog.net
> > http://www.dxlog.net/mailman/listinfo/support
> >
>
>
> ------------------------------
>
> Message: 2
> Date: Thu, 12 Sep 2013 18:10:37 +0200
> From: Oliver Grossmann <olli at bretzi.de>
> To: Support at dxlog.net
> Subject: [DXLog.net - Support] Roadmap
> Message-ID: <5231E77D.3000204 at bretzi.de>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi Chris,
>
> Is there a roadmap for the planed features available?
>
> Thanks Olli, DH2WQ
>
> --
> ------------------------------------------------------------------------
> Oliver Grossmann | DH2WQ | oliver.grossmann at bretzi.de
>
>
> ------------------------------
>
> Message: 3
> Date: Thu, 12 Sep 2013 20:04:25 +0200
> From: 9A5K <9a5k at 9a5k.com>
> To: Oliver Grossmann <olli at bretzi.de>
> Cc: "support at dxlog.net" <Support at dxlog.net>
> Subject: Re: [DXLog.net - Support] DX-Cluster announcements clicking
> Message-ID:
>     <CAD8hgPhLtfCYVzpgQSK+wnF0osRkHvhR2m0BGL25jXh5fNfTow at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Hi Oliver.
>
> Thanks for this report.
> There is one property in the code which I changed now, and it works OK on
> my PC.
> So, you can expect this to be fixed with next build.
>
> 73,
> Chris - 9A5K
>
>
>
> On Thu, Sep 12, 2013 at 6:00 PM, Oliver Grossmann <olli at bretzi.de> wrote:
>
> > Hi Chris,
> > I tested just 2.0.11 after i installed last weekend Version 2.0.10. Looks
> > very nice for me. Thank you for all your work.
> >
> > I found one odd thing:
> >
> > If i click on a DX-Cluster announcements with a single click. It is not
> > possible to double click on this spot any more if you are staying with
> the
> > mouse on the same field.
> >
> > An Example:
> > If i first single click on the frequency and after i double click on the
> > belonging call, everything works as expected, but if i first single click
> > on the frequency and double click the frequency field after some moments,
> > nothing happend.
> >
> > Also i discovered if you single click twice in a field of the DX-Cluster
> > announcements, you can edit it.
> >
> > I guess it is just a matter of a locking the content with a flag.
> >
> > Thanks
> >
> > Olli, DH2WQ
> >
> > ------------------------------**------------------------------**
> > ------------
> > Oliver Grossmann | DH2WQ | oliver.grossmann at bretzi.de
> >
> > On 11.09.2013 20:41, 9A5K wrote:
> >
> >> Hi everyone.
> >>
> >> Version 2.0.11 is now available for public download.
> >>
> >> There are some bugfixes from last days and there are some new features
> >> added.
> >>
> >> Any feedback specially regarding QTC's before WAEDC this weekend is
> really
> >> welcome.
> >>
> >> Here is a short c/p from release notes:
> >>
> >> - Double click on Check callsign or Check multipliers data now
> immediately
> >> scrolls log to clicked qso.
> >> - Tools->Repeat loop option was broken (txt command was OK). Fixed now.
> >> (TNX DK5TX)
> >> - Redefine keys wasn't working properly when destination key included
> >> Shift
> >> modifier. Fixed now. (TNX DK5TX)
> >> - OmniRig is now supported.
> >> - ADIF import is redesigned and optimized for faster import.
> >> - The hyphen or minus key (-) quickly activates/deactivates Split mode.
> >> - Command line arguments "-n" or "--noautoload" can be specifed to
> >> override
> >> Load contest at startup option.
> >> - WAEDC contest - DX side QTC sending is now enabled.
> >> - WAEDC contest - added info messages for number of QTCs
> >> available/received/sent/in stock etc.
> >> - Floating windows option was broken. Now fixed. (TNX DF1LX)
> >> - Check multipliers window data was display only for MULT1 field. Now it
> >> uses first field in sequence MULT1, MULT2, MULT3
> >>    which isn't empty. (TNX DK5TX)
> >> - QTC network messages added. QTC synchronization is on and data is
> >> synchronized between stations in network.
> >> - Options->Log->Fonts->Large wasn't properly restored after log opening.
> >> Fixed. (TNX G4BYG)
> >>
> >> More to come soon..
> >>
> >> 73,
> >> Chris - 9A5K
> >> ______________________________**_________________
> >> Support mailing list
> >> Support at dxlog.net
> >> http://www.dxlog.net/mailman/**listinfo/support<
> http://www.dxlog.net/mailman/listinfo/support>
> >>
> >>  ______________________________**_________________
> > Support mailing list
> > Support at dxlog.net
> > http://www.dxlog.net/mailman/**listinfo/support<
> http://www.dxlog.net/mailman/listinfo/support>
> >
>
>
> ------------------------------
>
> Message: 4
> Date: Thu, 12 Sep 2013 14:37:44 -0700
> From: "Bob Wilson, N6TV" <n6tv at arrl.net>
> To: "DXLog.net Reflector" <support at dxlog.net>
> Subject: [DXLog.net - Support] SO2R Feature request: Independent CW
>     speeds    for Radio 1 and Radio 2
> Message-ID:
>     <CAOmNKGL=Z5gHGyh2cBJP9T5hMKLDbRH-P89eavPdtfGb2Ak7Fg at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Quite often you are running a pileup at high speed on Radio 1, and you want
> to call a multiplier at slower speed on Radio 2.  It would be nice if
> DXLog.net could support independently adjustable CW speeds for each radio.
> Of course, this has to work the same whether you are using Winkey, LPT, or
> COM port keying.
>
> It would also be nice if the current CW speed(s) and REPEAT mode were
> indicated in a separate dedicated window with adjustable font size, instead
> of being fixed at the bottom of the Rate window, so it could be placed off
> to the side.
>
> Some new text commands and/or Operating menu items might be useful too:
>
> NOSYNCW - Radio 1 and Radio 2 CW speeds are independent of each other
> SYNCCW - Radio 1 and Radio 2 CW speeds are synchronized (the default, like
> today)
> SYNCSPEED - Assigns the active radio's current CW speed to the other radio
>
> Ctrl+Alt+F9, AltGr+F9 / Ctrl+Alt+F10, AltGr+F10 / Ctrl+Alt+V, AltGr+V could
> be used to change CW speed on the inactive radio.  (I will probably map
> these to Shift+PageUp and Shift+PageDown using DEFINEKEYS).
>
> 73,
> Bob, N6TV
>
>
> ------------------------------
>
> Message: 5
> Date: Fri, 13 Sep 2013 09:29:45 +0700
> From: SOUZKABEL <souzkabel at yandex.ru>
> To: support at dxlog.net
> Subject: [DXLog.net - Support] show DUPE in LOG
> Message-ID: <52327899.1080404 at yandex.ru>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi
> checked 2.0.11
> If you are working QSO DUPE and write in LOG no marking DUPE
>
> R9IR
>
>
> ------------------------------
>
> Message: 6
> Date: Thu, 12 Sep 2013 19:34:56 -0700
> From: "Bob Wilson, N6TV" <n6tv at arrl.net>
> To: "DXLog.net Reflector" <support at dxlog.net>
> Subject: Re: [DXLog.net - Support] show DUPE in LOG
> Message-ID:
>     <CAOmNKGLP0gnB05RMzp2VtaPq8apXGOXOvgVZZASuRE06dDpqnQ at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Yes, but it marks it with 0 points.  It would be nice if it said "DUPE" in
> the MULT column after you log a dupe.
>
> 73,
> Bob, N6TV
>
> On Thu, Sep 12, 2013 at 7:29 PM, SOUZKABEL <souzkabel at yandex.ru> wrote:
>
> > Hi
> > checked 2.0.11
> > If you are working QSO DUPE and write in LOG no marking DUPE
> >
> > R9IR
>
>
> ------------------------------
>
> Message: 7
> Date: Fri, 13 Sep 2013 09:57:39 +0700
> From: SOUZKABEL <souzkabel at yandex.ru>
> To: support at dxlog.net
> Subject: [DXLog.net - Support] No grab from N+1 and Check Partials
> Message-ID: <52327F23.5010204 at yandex.ru>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>
> Hello !
> No grab from the  N+1  and  Check Partials windows
>
> R9IR
>
>
> ------------------------------
>
> Message: 8
> Date: Fri, 13 Sep 2013 07:28:26 +0200
> From: 9A5K <9a5k at 9a5k.com>
> To: support at dxlog.net
> Subject: Re: [DXLog.net - Support] show DUPE in LOG
> Message-ID:
>     <CAD8hgPj-ejpzThbtCJ07d+MZ8vogJXBCLXxdMhP-kNUjrbsBng at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> OK, version 2.0.12 will indicate dupe also with text DUPE in the mult
> column, so it will be more visible.
>
> 73,
> 9A5K
> On Sep 13, 2013 4:35 AM, "Bob Wilson, N6TV" <n6tv at arrl.net> wrote:
>
> > Yes, but it marks it with 0 points.  It would be nice if it said "DUPE"
> in
> > the MULT column after you log a dupe.
> >
> > 73,
> > Bob, N6TV
> >
> > On Thu, Sep 12, 2013 at 7:29 PM, SOUZKABEL <souzkabel at yandex.ru> wrote:
> >
> > > Hi
> > > checked 2.0.11
> > > If you are working QSO DUPE and write in LOG no marking DUPE
> > >
> > > R9IR
> > _______________________________________________
> > Support mailing list
> > Support at dxlog.net
> > http://www.dxlog.net/mailman/listinfo/support
> >
>
>
> ------------------------------
>
> Message: 9
> Date: Fri, 13 Sep 2013 08:42:15 +0200
> From: 9A5K <9a5k at 9a5k.com>
> To: "Bob Wilson, N6TV" <n6tv at arrl.net>
> Cc: "DXLog.net Reflector" <support at dxlog.net>
> Subject: Re: [DXLog.net - Support] SO2R Feature request: Independent
>     CW speeds for Radio 1 and Radio 2
> Message-ID:
>     <CAD8hgPixFsN0gsjCGNuztxnr2G_0MNy1-2F_t50CFGJBjPoWmA at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Hi.
>
> That's really good idea Bob.
>
> Maybe some shortcut to syncspeed will be fine too..
> We can add that later too.
>
> 73,
> Chris - 9A5K
>
>
>
>
> On Thu, Sep 12, 2013 at 11:37 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:
>
> > Quite often you are running a pileup at high speed on Radio 1, and you
> want
> > to call a multiplier at slower speed on Radio 2.  It would be nice if
> > DXLog.net could support independently adjustable CW speeds for each
> radio.
> >  Of course, this has to work the same whether you are using Winkey, LPT,
> or
> > COM port keying.
> >
> > It would also be nice if the current CW speed(s) and REPEAT mode were
> > indicated in a separate dedicated window with adjustable font size,
> instead
> > of being fixed at the bottom of the Rate window, so it could be placed
> off
> > to the side.
> >
> > Some new text commands and/or Operating menu items might be useful too:
> >
> > NOSYNCW - Radio 1 and Radio 2 CW speeds are independent of each other
> > SYNCCW - Radio 1 and Radio 2 CW speeds are synchronized (the default,
> like
> > today)
> > SYNCSPEED - Assigns the active radio's current CW speed to the other
> radio
> >
> > Ctrl+Alt+F9, AltGr+F9 / Ctrl+Alt+F10, AltGr+F10 / Ctrl+Alt+V, AltGr+V
> could
> >  be used to change CW speed on the inactive radio.  (I will probably map
> > these to Shift+PageUp and Shift+PageDown using DEFINEKEYS).
> >
> > 73,
> > Bob, N6TV
> > _______________________________________________
> > Support mailing list
> > Support at dxlog.net
> > http://www.dxlog.net/mailman/listinfo/support
> >
>
>
> ------------------------------
>
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support
>
>
> End of Support Digest, Vol 4, Issue 8
> *************************************
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support
>


------------------------------

Message: 2
Date: Fri, 13 Sep 2013 11:12:33 +0200
From: PeterK <pkfalkensee at gmail.com>
To: Support at dxlog.net
Subject: [DXLog.net - Support] Feature Requests or wishes ...
Message-ID: <5232D701.6030306 at gmail.com>
Content-Type: text/plain; charset=UTF-8; format=flowed

Hi,

maybe this is something for your "ToDo" list:

1. "Sort of selectable contest based on Monthly base"
For sure most of the contest are in the same month every year - some are 
based on small deviations like only on public holidays, which are not 
fixed like Easter ...
Could you create the possibility to "sort" the contests based on monthly 
base? It may be easier to select a contest, which is somehow running at 
this weekend and the name is "not" known :)
2. DXpediton mode:
could this mode expanded to a "logging" mode - that mean in the 
"contest" ALL qso?s which are within DXlog existing are available or 
accessible. I believe that a lot of contester will use DXlog as 
"standard" log to get new DXCC announced out of contests.
3. CAT must be checked e.g. every 5min.
If the connection to the transceiver is broken - this will not be seen 
from DXlog. That is a must to be solved. E.g. if RF disturbs the 
connection - it will not be seen from the OP.
4. Is it possible, that for DXpeditions log the date will be shown in 
the QSO window?
5. If a cluster is not available - automatic try to connect the next one 
in the list.
6. Command like "sh/dx/60" may be sent if a cluster is connected - will 
show already the existing mults without manual interaction
7. Include the commandline for Cluster in the cluster window - maybe useful
8. show different colour within the cluster window if a announcement is 
a new mult
9. count the announcements for each band and show a trend to have best 
efforts in QSO/Mults (N1mm have this nice feature)
10. it is possible to switch Mode for CW and SSB via typing this as 
string in the callsign area - RTTY is not possible - maybe nice for 
DXexpeditionsmode + automatically start of mmtty or ...
11. maybe more ...

That maybe nice addons or not.

Greetings Peter DF1LX


------------------------------

Message: 3
Date: Fri, 13 Sep 2013 11:26:51 +0200
From: "SA6AQP ." <sa6aqp at hotmail.com>
To: "support at dxlog.net" <support at dxlog.net>
Subject: [DXLog.net - Support] Add contest
Message-ID: <DUB124-W3925A8B281CC1687BECE6E8B3B0 at phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"

Hi and tnx for a very nice Contest software.
I wonder if it's possible to add support for NAC in upcoming versions.






-------------------------------------------------
73 de Christer
http://www.sk6hd.se


SA6AQP/SG6A/SI6W
Christer Johansson
Dotorpsgatan 55B
SE-52144  Falkoping
SWEDEN


                          

------------------------------

Message: 4
Date: Fri, 13 Sep 2013 11:28:58 +0200
From: 9A5K <9a5k at 9a5k.com>
To: PeterK <pkfalkensee at gmail.com>, "support at dxlog.net"
    <support at dxlog.net>
Subject: Re: [DXLog.net - Support] Freeze of DXlog during import of
    ADIF
Message-ID:
    <CAD8hgPjJpHmWP1Nqv-6ea_dTOW3SOfyfuJ_+_-V+QXBPeVw7xQ at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Hi Peter.

Thanks for log example.
I found where the error was.

In DXpedition mode, we have defined only three modes now: CW, SSB and RTTY.

However, ADIF import procedure in v2.0.11 doesn't check if there are other
modes beside these above.
When log is opened, each QSO is calculated to create worked dxcc tables per
band and mode.
First qso where open log is broken is PSK63 mode... :-)

I will add more modes in definition, so this will fix the problem.
Also, there will be new check if band/mode is recognized during ADIF import.
If there will be a problem, all problematic qsos will be written into some
kind of error file, so, user can check later where is the problem,
and just append this file later, after fixing the problem.

Also, there will be a little change in Summary window, which currently
shows CW, SSB and RTTY columns.
This will be changed in CW, PH, DIGI columns. In PH columns, we will
summarize all Phone modes (like SSB, AM, FM),
and in DIGI columns we will summarize digital modes (RTTY, PSK31, PSK63
etc)...

This will be fixed in 2.0.12..


Regarding two other questions:

1. I will check the installer, if there isn't possible to change
destination folder, it will be added.
So, during install, you will have possibility to install DXLog.net in any
folder you want.

2. OK, I am thinking about creating some kind of default naming structure,
which can be later adjusted by user if needed.
Also, default folder name will be added (defaulted to MyDocuments folder,
but user will be able to change default location)..



73,
Chris - 9A5K


On Fri, Sep 13, 2013 at 9:59 AM, PeterK <pkfalkensee at gmail.com> wrote:

>  Hi,
>
> I will attach the file:
>
> Oops - 28 Mb :)
> I zip it and it is 1.2 Mb.
>
> Therefore a second question:
>
> 1- I hate to store programs and data on "C:" - If I need to reinstall my
> Win7 (never happens until today :) ) my data are on D: - could you change
> the install area in the future? I have one own folder for all HAMRadio
> programs on D: e.g.
> 2- Could you add an ini line for the standard DXN folder? And it maybe
> nice to create a filename based on contest and year  :)
>
> Greetings and see ya
>
> Peter DF1LX
>
>


------------------------------

Message: 5
Date: Fri, 13 Sep 2013 11:32:40 +0200
From: 9A5K <9a5k at 9a5k.com>
To: "SA6AQP ." <sa6aqp at hotmail.com>
Cc: "support at dxlog.net" <support at dxlog.net>
Subject: Re: [DXLog.net - Support] Add contest
Message-ID:
    <CAD8hgPgW-1JFhKg+vxV-feDG1AxWjw5sTit4UnFqZUWaxwA9Vg at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Hi Christer.

Yep, this wouldn't be a problem.
DXLog.net have all contest rules definitions in simple txt files.
It's mostly copy/paste business from most similar contest and little work
to adjust contest name and point/mult calculation.

Could you just reply with links to the contest rules, so I can archive that.

Thanks.

73,
Chris - 9A5K





On Fri, Sep 13, 2013 at 11:26 AM, SA6AQP . <sa6aqp at hotmail.com> wrote:

> Hi and tnx for a very nice Contest software.
> I wonder if it's possible to add support for NAC in upcoming versions.
>
>
>
>
>
>
> -------------------------------------------------
> 73 de Christer
> http://www.sk6hd.se
>
>
> SA6AQP/SG6A/SI6W
> Christer Johansson
> Dotorpsgatan 55B
> SE-52144  Falkoping
> SWEDEN
>
>
>
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support
>


------------------------------

_______________________________________________
Support mailing list
Support at dxlog.net
http://www.dxlog.net/mailman/listinfo/support


End of Support Digest, Vol 4, Issue 10
**************************************


More information about the Support mailing list