[DXLog.net - Support] Minor issues noted while WPX

[Juha Rantanen]

Hi,

Another thing I remembered was that I couldn't figure out how to setup K3
voice messages such that I could have ended a QSO with PLUS (+) - key.
"Thank you"-message and log the QSO. Function keys F1-F4 were working as
they should but INSERT and PLUS keys should work as well. INSERT is not
needed in WPX rather than later in CQWW and in others where the exhange is
static. How can I setup this?

73,
Juha OH6XX


2014-04-02 9:01 GMT+03:00 Juha Rantanen <oh6xx at sral.fi>:

> Hi,
>
> We had our first run with the Dxlog.net and general impression is good and
> logging over 4500 QSO's during the weekend at OG9X M/S (at OH5Z) proved
> that you are on right track. There were some minor issues noted during WPX.
>
> - Logging a W7/HB9FHV type QSO makes a new multiplier W70 which is
> incorrect. It should be plain W7.
>
> - When station status is RUN in M/S and number server is activated double
> clicking spot on the band map window the callsign is brought correscly to
> logging window but the serial number is changed to something it shouldn't
> be. We were running  somewhere in numbers 4000 or so and I decided to
> double click on one of the spots. The serial number was changed to 2345 or
> so and I had to manually change it to the correct one. In the menu bar
> below logging window Dxlog said something like "number server number 2345".
> After correcting the number manually and double clicking again same thing
> happened.
>
> - Some of our ops missed the "Send frequency to SUB RX"-option in band map
> window when right clicking a spot.
>
> The number server didn't seem to work at all. I had to guess correct
> settings as I couldn't find any documentation of it. Could someone
> enlighten me how to setup the number server for several machines so that we
> can use it in WPX CW. On SSB one can hear the other station shouting (yep
> that's correct) the numbers but on CW the number server must work.
>
> Keep up  with the good work.
>
> 73, Juha OH6XX
>