[DXLog.net - Support] Success with DXLOG CW contest, PowerSDR, Ddutil, and CW Skimmer
Andrew O'Brien
k3ukandy at gmail.com
Thu Mar 27 03:04:14 CET 2014
Success! I took a rest for a few days and tackled the set-up issue again
today. I am please to say that I have DXLOG working correctly , sending CW
from the F-Keys, while interfaced with PowerSDR direct I/Q output. Also
interfaced is DDutil and CW Skimmer. The DX Cluster feature in DXlog is
also interfaced with my Cw Skimmer feed to locahost on port 7300.
Here is a quick video I made
http://www.youtube.com/embed/oHtA3NHWfmU?vq=hd1080
No sound, just screen shots.
I used VPS manager, created several pairs.
4-14
5-15
6-16
7-17
8-18
Not all are used for this project.
Here is the set up, not sure if all is needed , but here is what is working
for me
POWERSDR
SETUP/ CAT CONTROL
Port 16 , check box for ENABLE CAT
PTT CONTROL
UNCHECK "enable PTT" (why? I don't know!)
PORT 4
RTS box checked
DTR box checked
(I'm mot even sure if I am actually use this section, but since it really
screwed things up when I first tried, I'm mentioning it here)
DSP tab in PowerSDR
then KEYER tab
PRIMARY=RADIO
SECONDARY = Com 17
PTT LINE = none
Keyline = DTR
Iambic and sidetone check boxes are also checked.
DXLOG,net PORT CONFIGURATION
INTERFACE 7 enabled
SETUP DTR =CW RTS = ALWAYS OFF
INTERFACE 8 enabled. Radio 1. SETUP = RADIO=Kenwood 19200 baud, 8 N1
USE CAT PTT Command on Phone box is checked.
DTR = CW RTS PTT Radio 1.
Andy K3UK
More information about the Support
mailing list