[DXLog.net - Support] Success with DXLOG CW contest, PowerSDR, Ddutil, and CW Skimmer

[9A5K]

UFB.. Good job Andy...

73,
Chris - 9A5K


On Thu, Mar 27, 2014 at 3:04 AM, Andrew O'Brien <k3ukandy at gmail.com> wrote:

>
> Success!  I took a rest for a few days and tackled the set-up issue again
> today.  I am please to say that I have DXLOG working correctly , sending CW
> from the F-Keys, while interfaced with PowerSDR direct I/Q output.  Also
> interfaced is DDutil and CW Skimmer.  The DX Cluster feature in DXlog is
> also interfaced with my Cw Skimmer feed to locahost on port 7300.
>
> Here is a quick video I made
>
> http://www.youtube.com/embed/oHtA3NHWfmU?vq=hd1080
>
> No sound, just screen shots.
>
> I used VPS manager, created several pairs.
>
> 4-14
> 5-15
> 6-16
> 7-17
> 8-18
>
>  Not all are used for this project.
>
> Here is the set up, not sure if all is needed , but here is what is
> working for me
> POWERSDR
> SETUP/ CAT CONTROL
> Port 16 , check box for ENABLE CAT
>
> PTT CONTROL
> UNCHECK "enable PTT" (why?  I don't know!)
> PORT 4
> RTS box checked
> DTR box checked
> (I'm mot even sure if I am actually use this section, but since it really
> screwed things up when I first tried, I'm mentioning it here)
>
> DSP tab in PowerSDR
> then KEYER tab
> PRIMARY=RADIO
> SECONDARY = Com 17
> PTT LINE = none
> Keyline = DTR
> Iambic and sidetone check boxes are also checked.
>
>
>
>
> DXLOG,net PORT CONFIGURATION
>
> INTERFACE 7 enabled
> SETUP  DTR =CW RTS = ALWAYS OFF
> INTERFACE 8 enabled.  Radio 1. SETUP = RADIO=Kenwood 19200 baud, 8  N1
> USE CAT PTT Command on Phone box is checked.
> DTR = CW RTS  PTT Radio 1.
>
>
> Andy K3UK
>
>