[DXLog.net - Support] Digital Voice Keyer

Miguel EA5GF miguel at ea5gf.es
Wed Jun 17 01:05:11 CEST 2015


Hello Chris.

No this is possible solve changing the default sound card on windows but is welcome have the sound card selection on DXlog.

The problem is;

The new radios with USB port (universal serial bus) no need external sound card, the same cable have CV-I and sound card. But the audio from USB port only it's possible get on USB-D1/USB-D2/LSB-D1... Modes, not works on normal USB/LSB. if you are making CQ with keyer on USB-D1 when one station reply need change to USB mode to use microphone. Another softwares change mode to USB-D1 on TX  when DVK are playing. It's possible send cat command before TX to change to USB-D1 ?

Any are working with internal DVK on IC-7600/IC-7700/IC-7800?

73!

Miguel EA5GF


> El 16/6/2015, a las 23:47, 9A5K <9a5k at 9a5k.com> escribió:
> 
> Hi Miguel.
> 
> I will check this. If I understand it OK, we need to change card output between USB mode and USB-D1, depends on situation when mic is used and when keyer is used.
> Or to clarify it a bit, we need default output sound card and additional selection when keyer is used?
> Is it correct?
> 
> If it is, it isn't currently supported. But, it can be added very quickly, to allow additional selection in Config->Interfaces screen to choose different sound cards
> in such case .
> 
> 73,
> Chris - 9A5K
> 
> 
>> On Tue, Jun 16, 2015 at 10:54 PM, <miguel at ea5gf.es> wrote:
>> Hello.
>> 
>> Thanks, Shift + F1 works and play the message but i need put the radio on USB-D1 to get a sound from emulated sound card of new icom radios, with N1MM have option to auto change from USB mode (to use mic) to USB-D1 when are using the keyer. Also i test internal DKV but the radio is on TX with no audio and not change to RX.
>> 
>> Thanks for prompt reply :-)
>> 
>> Miguel, EA5GF
>> 
>> 
>> James Balls <makidoja at gmail.com> escribió:
>> 
>> 
>>> Have you anabled use DVK in the radio config window?
>>> 
>>> This will use the internal DVK of the radio
>>> 
>>> Jim M0CKE
>>> On 16 Jun 2015 21:28, <miguel at ea5gf.es> wrote:
>>> 
>>>> Hello.
>>>> 
>>>> I readed all wiki on dxlog.net website and view the mailman to configure
>>>> the DKV but i dont find how configure DVK. I have configured IC-7600 when
>>>> press F1 the radio TX a 0,2 sec but, where put the audio file to play?
>>>> Appears dont find the .wav file but any error message or debug to view.
>>>> Also i testest the internal DKV option to use a audio file on IC-7600
>>>> without results.
>>>> 
>>>> This is a email from K3UK on 2014 without reply.
>>>> 
>>>> -------------------
>>>> 
>>>> I am not in the WPX contest but I thought I might try setting up DXLOG for
>>>> DVK operations and test it this weekend. Can someone point me to a the
>>>> instructions for setting this up ?
>>>> 
>>>> Andy K3UK
>>>> ----------
>>>> 
>>>> Thanks, Miguel EA5GF
>>>> _______________________________________________
>>>> Support mailing list
>>>> Support at dxlog.net
>>>> http://www.dxlog.net/mailman/listinfo/support
>> 
>> 
>> _______________________________________________
>> Support mailing list
>> Support at dxlog.net
>> http://www.dxlog.net/mailman/listinfo/support
> 


More information about the Support mailing list