[DXLog.net - Support] Frequency in the log pane

Thu Nov 5 13:43:41 CET 2015

Hello Chris.

$1A

$00

data

Send/Read ext. memory

Format differs for various rigs, details see  <http://www.plicht.de/ekki/civ/civ-p43.html> Section 4.3

$01

data

Details for some rigs,  <http://www.plicht.de/ekki/civ/civ-p43.html> Section 4.3
IC-R75: IF filter settings
IC-746, IC-756Pro, IC-7000: Set bandstacking registers
IC-R8500: Read ext. memory
IC-910: Set satellite mem.

$02

data

Details for some rigs,  <http://www.plicht.de/ekki/civ/civ-p43.html> Section 4.3
IC-R75: mode contents
IC-746, IC-756Pro, IC-7000: Mem. keyer contents
IC-910: Set VOX gain level

$03

data

Details for some rigs, see  <http://www.plicht.de/ekki/civ/civ-p43.html> Section 4.3
IC-746, IC-7000: Set/Read IF filter setting
IC-R8500: Read bank name
IC-910: Set VOX delay

$04

level

IC-910: Set Anti-VOX level
IC-7000:Set/read AGC time constants

$05

level

Set Attentuation level

IC-910 only

$05xx

Many new commands

IC-756Pro2/3, IC-746Pro, IC-7800, IC-7000 and others, see own section for each radio

$06

b

IC-910: Set RIT off/on: $00=Off, $01=On, $02=sub dial
IC-756Pro2/3, IC-746Pro, IC-7800 Data Mode (LSB-D, USB-D): $00=Off; $01=On
IC-7000 Set/read SSB TX bandwidth: $00=wide, $01=mid, $02=narrow

$07

b

IC-910: Set satellite mode: $00=Off, $01=On
IC-756Pro2/3, IC-746Pro, IC-7800 SSB Tx bandwidth: $00=wide, $01=mid, $02=narrow
IC-7000 Set/Read DSP filter shape: $00=sharp, $01=soft

$08

b

IC-910 Set simple bandscope: $00=Off, $01=On
IC-746Pro, IC-7800 DSP filter shape: $00=sharp; $01=soft
IC-7000 Set/read Manual Notch 1 bandwidth: $00=wide, $01=mid, $02=nar

$09

b

IC-7800 Set/Read roofing filter:$00=6kHz, $01=15kHz
IC-7000 Set/read Manual Notch 2 bandwidth: $00=wide, $01=mid, $02=nar

$0A

b

IC-7800 Set/read Manual Notch 2 width: $00=wide, $01=mid, $02=nar
IC-7000 Set/read 9600bps mode $00=Off, $01=On

$10

b

IC-7800 Set/read Lock function set $00=Off, $01=On

Also another contest software have the option can use a Serial port Dumper such:

http://www.eltima.com/products/rs232-data-logger/

73!

--

Miguel – EA5GF

 <mailto:miguel at ea5gf.es> miguel at ea5gf.es

De: 9A5K [mailto:9a5k at 9a5k.com] 
Enviado el: jueves, 05 de noviembre de 2015 11:41
Para: Miguel - EA5GF
CC: support at dxlog.net
Asunto: Re: [DXLog.net - Support] Frequency in the log pane

Hi Miguel.

Yes, of course... we can add this as additional option in Radio configuration.

When enabled, it will be possible the command will be sent before message start playing.

When message playback is finished, it will restore previous mode in such cases.

This can be implemented very fast, I just need to check CAT documentation, so you will be able to test it 

very soon.

73,

Chris - 9A5K

On Thu, Nov 5, 2015 at 10:49 AM, Miguel - EA5GF <miguel at ea5gf.es> wrote:

Hello Chris.

Its possible add in future versions the change on TX from USB to USB-D1 and
back to USB on RX to use ICOM internal sound cards with DVK?

http://www.dxlog.net/pipermail/support/2015-June/001021.html

The audio from computer via internal USB sound card only works on
USB-D1/USB-D2/USB-D3/LSB-D1/ LSB-D2/ LSB-D3 and if you work the contest on
USB-D cannot us normal MIC connected to radio.

Thanks  and congratulations for new improvements.

--

Miguel - EA5GF
miguel at ea5gf.es

-----Mensaje original-----
De: support-bounces at dxlog.net [mailto:support-bounces at dxlog.net] En nombre
de 9A5K
Enviado el: jueves, 05 de noviembre de 2015 10:02
Para: Martin , LU5DX
CC: support at dxlog.net
Asunto: Re: [DXLog.net - Support] Frequency in the log pane

Hi Martin.

Yep, I can add it as new column, and it will be available as optional choice
from menu (similar as it is with mode and QSO# currently).

Additionally, new build will include couple of things already fixed / added:

- ESM mode - prefill exchange data can be disable when bandmap is clicked
(valid for esm mode only)
- Moving up/down with CTRL+UP/DOWN in data list mode now works correctly, it
doesn't depend on sorting selection anymore.
Also, it moves correctly after selected spot is worked and it disappears
from the list.
- CTRL+SHIFT+UP/DOWN functionality is now changed also. Previously, it was
used to grab first upper/lower spot, even if spot isn't valid (worked qso or
invalid qso). Now, it is used to grab first lower/upper multiplier qso, if
such exists in the bandmap.
This works same on both tabs (bandmap and list).
- DXCAnnouncements window has new information available now - summary info
of available multiplier and regular qsos count on all bands.

73,
Chris - 9A5K

On Thu, Nov 5, 2015 at 12:35 AM, Martin , LU5DX <lu5dx at lucg.com.ar> wrote:

> Hi Chris,
>
> Is it possible to add an option to show frequency of each QSO instead
> of QSO number in the log pane?
>
> I guess it should be an option, so that if checked the QRG will appear
> instead of the QSO # as the first field in the log pane.
>
> Hope you can implement it.
>
> 73 & TNX in advance.
>
> Martin LU5DX
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support
>
_______________________________________________
Support mailing list
Support at dxlog.net
http://www.dxlog.net/mailman/listinfo/support

_______________________________________________
Support mailing list
Support at dxlog.net
http://www.dxlog.net/mailman/listinfo/support