[DXLog.net - Support] DXLog.net version 2.2.17 is available now.
9a5k at 9a5k.com
Fri Sep 25 13:00:24 CEST 2015
I don't know if there is workaround for fldigi.
However integration with fldigi is also planned in near future and should
be available very soon.
Chris - 9A5K
On Fri, Sep 25, 2015 at 12:40 PM, Miguel - EA5GF <miguel at ea5gf.es> wrote:
> Great news Chris, TNX.
> It's on workaround add the possibility to use fldigi for digital modes?
> Miguel - EA5GF
> miguel at ea5gf.es
> -----Mensaje original-----
> De: support-bounces at dxlog.net [mailto:support-bounces at dxlog.net] En nombre
> de 9A5K
> Enviado el: jueves, 24 de septiembre de 2015 20:41
> Para: support at dxlog.net
> Asunto: [DXLog.net - Support] DXLog.net version 2.2.17 is available now.
> Hi everyone.
> Version 2.2.17 is finally available for download.
> As usual, c/p from release notes:
> Ver 2.2.17
> - Remote commands can be sent to stations in the network.
> - Check multipliers window now shows only mode selected in contest config
> screen, if not operating mixed. (TNX YT3W)
> - WAE - some corrections implemented in QTC editing. (TNX E70T)
> - Mode change problem for digi modes with CTRL+F1/F2 fixed. (TNX HB9BUN)
> - New option available for SO2V mode: Options->Interface specific
> options->Use SPLIT in SO2V technique.
> When checked, DXLog.net will activate SPLIT mode instead of VFO change
> when changing entry lines in SO2V technique.
> - New radio support added: Flexradio.
> - New option available: Options->Interface specific options->Use different
> bandmap background for active radio.
> When checked, it will use different bandmap background color for active
> (selected) radio or VFO in SO2R and SO2V mode. (TNX 4O3A)
> - COM port switch problem fixed when footswitch was activated quickly
> of times. (TNX R9IR)
> - CW speed can be changed with ALT+F9/F10 from QTC received window. (TNX
> - When QTC receive window is closed by clicking on conrol box, it remembers
> last state of fields in temporary buffer. (TNX R9IR)
> If window is reopened with same callsign it will restore it state.
> Temporary buffer is cleared when new callsign is used and QTC receive
> window is opened.
> - New buttons available at QTC receive window: F4 - sends "DE MYCALL" and
> F9 - sends "QSL Group/Num" (TNX R9IR)
> - Spacebar in QTC receive window now cycles in actual line only, not moving
> to new line anymore. Use enter to skip in next line. (TNX R9IR)
> - Escape doesn't close QTC send/receive window anymore, it just stops
> transmission. (TNX R9IR, IZ8JAI)
> - Logged operator property wasn't filled correctly when status info message
> was created. Fixed. (TNX IK2JUB)
> - New option in radio port setup: Don't poll during TX and Reinitialize
> after switching from TX to RX.
> First option is used to disable radio polling during TX time.
> Second option is used to reinitialize port after you switch from TX to
> It is useful in case of problems with RF feedback
> during TX time and if your CAT interface has stopped working because of
> - New radios supported: IC-7850 and IC-7851. (TNX VA3MJR)
> - New radio supported: IC-7100.
> - QTC receive window msg F4 wasn't sending callsign. Fixed. (TNX R9IR)
> - QTC send window - ALT+F9/F10 wasn't changing cw speed. Fixed. (TNX R9IR)
> Chris - 9A5K
> Support mailing list
> Support at dxlog.net
More information about the Support