[DXLog.net - Support] Missing from DXL for RTTY mode

[James Balls]

Hi Peter

Yes for so2v and so2r the dual entry line in DXL is king ... But im talking
MS run station with multi receivers and antennas i want just on log entry
line but multi decoders for rtty only

Jim
On 25 Sep 2015 13:46, "Peter Helfenstein" <peter.helfenstein at bluewin.ch>
wrote:

> James, Marco,
> For me Marco's point "N1MM is actually opening a separate window for VFO B
> in SO2V mode, that is actually even more confusing as I have to use the
> mouse to select the 2nd window before entering anything."
> is key and an important differentiator to N1MM. It is a lot
> easier/reducing stress jumping from VFO to VFO pressing a key instead of
> clicking the mouse!
> And with the new "SPLIT mode" in 2.2.17 SO2V also runs on the FT-2000!
> Many thanks Chris.
> Good luck and see you all in the contest!
> 73, Peter - HB9BUN
>
>
>
> ------------------------------
> Message: 5
> Date: Thu, 24 Sep 2015 08:52:04 +0200
>
> From: "Marco HB9CAT" <hb9cat at thezollingers.org>
> To: "'James Balls'" <makidoja at gmail.com>, <support at dxlog.net>
>
> Subject: Re: [DXLog.net - Support] Missing from DXL for RTTY mode
>
> James,
>
>> it's not an option as you then get 2 log entry lines and it becomes
>>>>
>>> confusing
>>
>> Getting 2 log entry lines is actually exactly what I'm looking for while
>> running SO2R (same for SO2V), as it allows me to manage 2 different QSOs
>> concurrently; it may indeed look confusing, but that's the price to pay to
>> increase the rate.
>>
>> N1MM is actually opening a separate window for VFO B in SO2V mode, that is
>> actually even more confusing as I have to use the mouse to select the 2nd
>> window before entering anything.
>>
>> Diversity: if you're referring to the specific K3 functionality, the audio
>> stream becomes Mono as you turn it on (the sub RX QRG matches the main RX)
>> so you would have have a single VFO with max 4 decoders on the same audio
>> stream and a single entry window.
>>
>> Generally: I agree that right now N1MM still has a distinct advantage on
>> RTTY
>>
>> 73s, Marco HB9CAT
>>
>> -----Original Message-----
>> From: support-bounces at dxlog.net [mailto:support-bounces at dxlog.net] On
>> Behalf
>> Of James Balls
>> Sent: mercoled?, 23. settembre 2015 16:54
>> To: support at dxlog.net
>> Subject: [DXLog.net - Support] Missing from DXL for RTTY mode
>>
>> Hi Chris / All
>>
>> >From an RTTY stance I think N1MM has a distinct advantage over DXL for
>> RTTY
>> in the MS category
>>
>> Missing for me is the option to have upto 4 RX decoders per receiver but
>> in
>> the same window.
>>
>> Also I would like to have the main and sub VFO in separate windows, at the
>> moment the only way to do this is by having SO2R or SO2V option enabled,
>> but
>> for multi single it's not an option as you then get 2 log entry lines and
>> it
>> becomes confusing.
>>
>> I would like to have the option of decoding both main and sub receivers
>> with
>> upto 4 decoders per receiver, all in the two decoder windows with dividers
>> between them (like N1MM)
>>
>> OR 6 decoders in the same window which would work for diversity mode.
>>
>> This would allow me to stack and work anything I hear with the K3 in
>> diversity RX mode as we often use 2 different antennas at the same time
>> with
>> the dual receivers and diversity on.
>>
>> Is this something that could be implemented please?
>>
>> I really wanted to use DXL for CQWW RTTY but the limitation above means I
>> have to use N1MM + which i'm not keen on.
>>
>> Jim M0CKE
>> _______________________________________________
>> Support mailing list
>> Support at dxlog.net
>> http://www.dxlog.net/mailman/listinfo/support
>>
>>
>>
>>
>> ------------------------------
>>
>> _______________________________________________
>> Support mailing list
>> Support at dxlog.net
>> http://www.dxlog.net/mailman/listinfo/support
>>
>>
>> End of Support Digest, Vol 28, Issue 8
>> **************************************
>>
>
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support
>