[DXLog.net - Support] New Scripts for K3 S02V support

[Oliver Grossmann]

Thanks fer info,
there is a tiny bug in the description:

K3_ListenBothVFO.cs will switch K3 to listen Main RX on left and Sub RX
on right stereo channel.

should be right.

73, Olli

Am 04.01.2016 um 20:56 schrieb Oliver Grossmann:
> Now with attached files as *.txt file, *.cs files are filtered.
>
> Olli, DH2WQ
>
> ------------------------------------------------------------------------
> Oliver Grossmann | DH2WQ | oliver.grossmann at bretzi.de
> Hi,
>
> happy new year to all.
>
> I wrote 3 scripts for K3 Audio switching for SO2V Operation.
> please refer to attached files.
>
> K3_ListenBothVFO.cs will switch K3 to listen Main RX on Right and Sub
> RX on left stereo channel.
>
> K3_ListenPrimaryVFO.cs will switch Main VFO to both stereo channels.
>
> K3_ListenSecondaryVFO.cs will switch Sub VFO to both Stereo channels.
>
> I also worked on a VFO switching for SO2V Mode on the K3 with limited
> success.
>
> I was able to add TX on 2nd RX by setting cdata.UseSPLITTInSO2V = true;
> but this works only on the same band due to the fact the K3 can't
> transmit on 2nd VFO if both VFOs are on the same band.
>
> I'm now looking for a possibility to swap VFOs on K3 by focusing on
> Radio 2 Entry over all bands. Therefore it is necessary to link VFO to
> R2 focus.
>
> I would handle the cdata.RadioTCStatusChanged event in such a manner:
>
> // (Only pseudo code and handling of first start etc has to be added) //
>
> If (cdata.FocusedRadio == 1)
> {
>     double copyVFOAFreq = VFOAFreq;
>     double copyVFOBFreq = VFOBFreq;
>
>     setVFOAFreq(copyVFOBFreq);
>     setVFOBFreq(copyVFOAFreq);
>
>     LinkVFOA(Radio_1);
> }
> else if (cdata.FocusedRadio == 2)
> {
>     double copyVFOAFreq = VFOAFreq;
>     double copyVFOBFreq = VFOBFreq;
>
>     setVFOAFreq(copyVFOBFreq);
>     setVFOBFreq(copyVFOAFreq);
>
>     LinkVFOA(Radio_2);
> }
>
> My Problem is LinkVFOA();
> Can I somehow redirect the CAT objects like frequencies or is it
> necessary to manipulate?
>
> Thanks
> Olli, DH2WQ
>
>
>
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support