[DXLog.net - Support] CW keying locks up

[James Balls]

Also USB drivers can cause issues

What USB to serial are you using ?? Is it a cheap eBay or a known chipset

Jim M0CKE
On 24 Jan 2016 18:49, "Ken K6MR" <k6mr at outlook.com> wrote:

> One thing to always check when you have a USB interface issue: be sure
> that the USB controller/port has the power saving mode turned off. If the
> port goes to sleep it can cause all kinds of weird things to happen.
>
> Ken K6MR
>
> From: Iain Kelly<mailto:iain at m0pcb.co.uk>
> Sent: Sunday, January 24, 2016 10:34
> To: Support at dxlog.net<mailto:Support at dxlog.net>
> Subject: [DXLog.net - Support] CW keying locks up
>
> Good evening,
>
> I've used DXlog in a couple of CW contests this year after recently buying
> a licence. I am very impressed, had everything set up swiftly and I've only
> hit one snag so far.
>
> During AFS CW contest I had the CW keying lock up a couple of times, i.e.
> hitting enter or any other keying key didn't send anything. This happened,
> but only once, this weekend in UKEICC DX CW.
>
> I found that hitting 'esc' a few times cleared the problem and computer
> keying worked fine.
>
> Using the winkey chip in a Microham u2r controller.
>
> 73, Iain M0PCB
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support
>