[DXLog.net - Support] DXLog and YCCC SO2R Box - CW Winkey issues

9A5K 9a5k at 9a5k.com
Mon Apr 10 09:22:30 CEST 2017


Hi Prasad.

Thanks for your feedback.
Can you resend last email directly to me, it seems that it is converted to
plain text when passing through mailing list,
so text formatting isn't preserved.

Thanks a lot.

73,
Chris - 9A5K




On Mon, Apr 10, 2017 at 5:29 AM, Prasad VU2PTT <vu2ptt at gmail.com> wrote:

> I did some further digging - older versions of DXlog also behave the same.
>
> I then went on to capture the Keyer messages in the SO2R Box utility which
> can capture keyer messages separately when starting N1MM+ and then pressing
> the F4 key which was programmed with my special call AT2FOC. I also did the
> same with DXLog - the results are below in the table if this helps.
>
> *Action*
>
> *N1MM+*
>
> *DXlog.net*
>
> *Startup*
>
> Connected to SO2R Box version 1.4-0
>
> * KE response 0x0a
>
> * KE command 0x00 0x02
>
> * KE command 0x0e 0x17
>
> * KE command 0x05 0x0a 0x2d
>
> * KE command 0x01 0x08
>
> * KE command 0x09 0x05
>
> * KE command 0x04 0x01 0x14
>
> * KE command 0x10 0x00
>
> * KE command 0x11 0x00
>
> * KE command 0x03 0x32
>
> * KE response 0xf6
>
> * KE command 0x07
>
> * KE command 0x02 0x3a
>
> * KE command 0x02 0x3a
>
> Connected to SO2R Box version 1.4-0
>
> * KE command 0x13
>
> * KE command 0x13
>
> * KE command 0x13
>
> * KE command 0x13
>
> * KE command 0x00 0x03
>
> * KE command 0x00 0x00 0x7f
>
> * KE response 0x55('U')
>
> * KE command 0x00 0x04 0x55
>
> * KE response 0x0a
>
> * KE command 0x00 0x02
>
> * KE command 0x01 0x04
>
> * KE command 0x03 0x31
>
> * KE command 0x04 0x01 0x08
>
> * KE command 0x05 0x14 0x28
>
> * KE command 0x09 0x05
>
> * KE command 0x0e 0x15
>
> * KE response 0xec
>
> * KE command 0x07
>
> * KE command 0x02 0x00
>
> * KE response 0xa6
>
> * KE command 0x02 0x1c
>
> * KE command 0x0e 0x15
>
> * KE command 0x02 0x1c
>
> *Hitting F4 *
>
> *MyCall key programmed with the call AT2FOC*
>
> * KE command 0x0a
>
> * KE Early echo condition seen
>
> * KE buffer clear
>
> * KE command 0x16 0x00
>
> * KE insPtr 0x00
>
> * KE command 0x16 0x02 0x00
>
> * KE LoadChar, ptr(in) 0x00
>
> * KE LoadChar, end ptr(out) 0x00
>
> * KE command 0x1c 0x3a
>
> * KE Adding character 0x41('A')
>
> * KE insPtr 0x01
>
> * KE state 0x00
>
> * KE LoadChar, ptr(in) 0x00
>
> * KE response 0xc4
>
> * KE loading character 0x41('A')
>
> * KE LoadChar, ptr(out) 0x00
>
> * KE command 0x41('A')
>
> * KE Adding character 0x54('T')
>
> * KE insPtr 0x02
>
> * KE state 0x02
>
> * KE command 0x54('T')
>
> * KE Adding character 0x32('2')
>
> * KE insPtr 0x03
>
> * KE state 0x02
>
> * KE command 0x32('2')
>
> * KE Adding character 0x46('F')
>
> * KE insPtr 0x04
>
> * KE state 0x02
>
> * KE command 0x46('F')
>
> * KE Adding character 0x4f('O')
>
> * KE insPtr 0x05
>
> * KE state 0x02
>
> * KE command 0x4f('O')
>
> * KE Adding character 0x43('C')
>
> * KE insPtr 0x06
>
> * KE state 0x02
>
> * KE command 0x43('C')
>
> * KE response 0x41('A')
>
> * KE LoadChar, ptr(in) 0x01
>
> * KE loading character 0x54('T')
>
> * KE LoadChar, ptr(out) 0x01
>
> * KE response 0x54('T')
>
> * KE LoadChar, ptr(in) 0x02
>
> * KE loading character 0x32('2')
>
> * KE LoadChar, ptr(out) 0x02
>
> * KE response 0x32('2')
>
> * KE LoadChar, ptr(in) 0x03
>
> * KE loading character 0x46('F')
>
> * KE LoadChar, ptr(out) 0x03
>
> * KE response 0x46('F')
>
> * KE LoadChar, ptr(in) 0x04
>
> * KE loading character 0x4f('O')
>
> * KE LoadChar, ptr(out) 0x04
>
> * KE response 0x4f('O')
>
> * KE LoadChar, ptr(in) 0x05
>
> * KE loading character 0x43('C')
>
> * KE LoadChar, ptr(out) 0x05
>
> * KE response 0x43('C')
>
> * KE LoadChar, ptr(in) 0x00
>
> * KE LoadChar, end ptr(out) 0x00
>
> * KE command 0x1c 0x1c
>
> * KE command 0x0e 0x15
>
> * KE command 0x02 0x1c
>
> * KE Adding character 0x41('A')
>
> * KE insPtr 0x01
>
> * KE state 0x00
>
> * KE LoadChar, ptr(in) 0x00
>
> * KE response 0xc4
>
> * KE loading character 0x41('A')
>
> * KE LoadChar, ptr(out) 0x00
>
> * KE command 0x41('A')
>
> * KE LoadChar, ptr(in) 0x01
>
> * KE LoadChar, end ptr(out) 0x01
>
> * KE response 0x41('A')
>
> * KE response 0xc0
>
> * KE LoadChar, ptr(in) 0x06
>
> * KE LoadChar, end ptr(out) 0x06
>
> * KE response 0xc0
>
>
>
> <Sends 1 character and rig stays in Send mode – PTT active>
>
>
> 73 de Prasad VU2PTT, W2PTT (ex-AF6DV)
>
> ARSI, ARRL, FOC, CWOPS, , MARC
> NCDXF, INDEXA, SCCC, EUPSK
> ARRL DXCC Card Checker
> CQ Awards Checkpoint
> Coordinator - VU Contest Group www.vucg.in
> Webmaster - Logger32 www.logger32.net
>
>
> On Sun, Apr 9, 2017 at 6:54 PM, Prasad VU2PTT <vu2ptt at gmail.com> wrote:
>
> >
> > I did some more testing with a Winkeyer USB with the Version 3 chip and
> > that seems to work fine with DXLog. The YCCC SO2R box with the Winlkeyer
> v1
> > emulation does not.
> >
> > However, the YCCC SO2R Box and the Winkeyer USB 3 both work fine on N1MM+
> > which is my current logger.
> >
> > Looks like a init message handling difference between a Winkeyer v1 and
> > Winkeyer v3.
> >
> > If it helps, I can plug in the Winkeyer v2 chip in the Winkeyer USB if
> > required and check.
> >
> > Please advise.
> >
> > 73 de Prasad VU2PTT
> >
> >
> > On Sat, Apr 8, 2017 at 3:30 PM, <support-request at dxlog.net> wrote:
> >
> >> Send Support mailing list submissions to
> >>         support at dxlog.net
> >>
> >> To subscribe or unsubscribe via the World Wide Web, visit
> >>         http://www.dxlog.net/mailman/listinfo/support
> >> or, via email, send a message with subject or body 'help' to
> >>         support-request at dxlog.net
> >>
> >> You can reach the person managing the list at
> >>         support-owner at dxlog.net
> >>
> >> When replying, please edit your Subject line so it is more specific
> >> than "Re: Contents of Support digest..."
> >>
> >>
> >> Today's Topics:
> >>
> >>    1. DXLog and YCCC SO2R Box - CW Winkey issues (Prasad VU2PTT)
> >>
> >>
> >> ----------------------------------------------------------------------
> >>
> >> Message: 1
> >> Date: Sat, 8 Apr 2017 01:44:45 +0530
> >> From: Prasad VU2PTT <vu2ptt at gmail.com>
> >> To: "DXLog.NET Support" <support at dxlog.net>
> >> Subject: [DXLog.net - Support] DXLog and YCCC SO2R Box - CW Winkey
> >>         issues
> >> Message-ID:
> >>         <CAFnwJmmkWQoyGWGq-eFdwCrhdQKGObdNxooo_VuEtHyMwyDWhA at mail.
> >> gmail.com>
> >> Content-Type: text/plain; charset=UTF-8
> >>
> >>
> >> Hi,
> >>
> >> New to this list and look forward to use DXLog a lot.
> >>
> >> I am now setting up DXLog with a YCCC SO2R box and facing an issue in
> >> getting CW going correctly. I have gone through all the messages
> regarding
> >> Winkey in the Support email list but did not find anything that could
> help
> >> and hence this email.
> >>
> >> Each time DXLog sends 2 characters and stops when using Smart Double
> >> Buffer
> >> feature - otherwise it sends just one character.
> >>
> >> I used the K1EL wkscan utility and also the wktest utility and they seem
> >> to
> >> recognize the YCCC SO2R keyer as a Winkey v1 and works perfectly like a
> >> regular Winkey.
> >>
> >> I can help with testing if any code changes need to be made.
> >>
> >> The OTRSP based antenna switching through the YCCC SO2R box seems to
> works
> >> fine.
> >>
> >>
> >> 73 de Prasad VU2PTT
> >>
> >> Also W2PTT (ex-AF6DV), ex-A45VA @ A44A
> >>
> >> ARSI, ARRL, FOC, CWOPS, MARC
> >> NCDXF, INDEXA, SCCC, EUPSK
> >> ARRL DXCC Card Checker
> >> CQ Awards Checkpoint
> >> Coordinator - VU Contest Group www.vucg.in
> >> Webmaster - Logger32 www.logger32.net
> >>
> >>
> >> ------------------------------
> >>
> >> _______________________________________________
> >> Support mailing list
> >> Support at dxlog.net
> >> http://www.dxlog.net/mailman/listinfo/support
> >>
> >>
> >> End of Support Digest, Vol 47, Issue 4
> >> **************************************
> >>
> >
> >
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support
>


More information about the Support mailing list