[DXLog.net - Support] IC7700 ?
Stein-Roar Brobakken
post at lb3re.com
Wed May 24 19:38:13 CEST 2017
Hi
Does anyone use IC7700 in dxlog?
LN2HQ tries to setup as WT
For IC-7700, in radio menu: "Others"
- CI-V Baud Rate 19200 (do not use "Auto")
- CI-V Address 74h
- CI-V Transceive ON
- RS-232C function CI-V
In Win-Test SETUP menu:
- Radio type IC-7700
- "Use CI-V Transceive" should be checked.
- "Don't poll" should also be checked
- Next to Radio 1 COM port, click Configure button
- Click "IC-7700 Default Settings Button" (19200, N, 8, 1, DTR Always
Off, RTS Always OFF)
If still no luck, it's probably caused by bad USB-to-Serial adapter
(Prolific?), instead of good USB-to-Serial adapter (FTDI).
Start, Run, devmgmt.msc (Windows Device Manager), expand *Ports*, verify COM
port numbers match what you are using in Win-Test.
.
Right click on COM port, select, Properties, Driver. If it says "Prolific",
it may not work.
Best Regards/Med Vennlig Hilsen
73s LB3RE Stein-Roar <RAG> Brobakken
More information about the Support
mailing list