Keyboard and text functions

Keyboard functions

QSO Entry line

[Enter]	Log a contact
[Spacebar]	Move cursor between callsign entry and report fields
[Left arrow] or [Ctrl][B]	Move cursor one character to the left
[Right arrow] or [Ctrl][F]	Move cursor one character to the right
[Home] or [Ctrl][A]	Move cursor to the beginning of the field
[End] or [Ctrl][E]	Moves the cursor to the end of the field
[Backspace]	Delete the character located left of the cursor
[Tab]	Move cursor between sent RST and received number fields
[>]	Move cursor to next field in the main log
[<]	Move cursor to previous field in the main log
[Del] or [Ctrl][D]	Delete the character located under the cursor
[F11]	Clear all the fields of the current QSO, and puts the cursor into the callsign logging field
[Alt][W]	Clear QSO (like F11)
[Alt][F]	Edit QSO date and time
[Alt][N]	Write a note regarding this QSO
[Ctrl][W]	Clear the current field, if report field is cleared, initialise RST
[Ctrl][Z]	Undo - restores edited QSO data to prior value (see Menu:Edit#Restore_QSO)
[Ctrl][Left arrow]	Like [Home]
[Ctrl][Right arrow]	Like [End]
[Ctrl][+] or [Ctrl][Keypad +]	Silently log QSO

Moving around the log

[Up arrow]	Move one QSO up
[Down arrow]	Move one QSO down
[PageUp]	Move 10 QSOs up
[PageDown]	Move 10 QSOs down
[Ctrl][E]	Edit the selected QSO
[Ctrl][G]	Go to a specific QSO number
[Ctrl][Home]	Go to first QSO in log
[Ctrl][End]	Go to last QSO in log
[Ctrl][PageDown]	Go forward 24 hours
[Ctrl][PageUp]	Go back 24 hours
[Ctrl][X]	Toggles the X-QSO flag which invalidates the QSO, making it not count and export as X-QSO: line in Cabrillo.

Operation

[F1]	Play message #1	Usually CQ
[F2]	Play message #2	Usually full report
[F3]	Play message #3	Usually contest exchange e.g. serial number
[F4]	Play message #4	Usually your call
[F5]	Play message #5	Usually the logged callsign
[F6]	Play message #6
[F7]	Play message #7
[Insert]	Play the message defined for this key
[+]	Play the message defined for this key
[Esc]	Stop the output message instantly
[Alt][C]	Send or modify additional messages
[Alt][K]	Toggle Keyboard mode
[Ctrl][M]	Toggle ESM - Enter Sends Message
[Alt][V]	Change CW speed (opens "CW-Speed" entry box)
[Alt][F9]	Decrease CW speed by 2 WPM
[Alt][F10]	Increase CW speed by 2 WPM
[Ctrl][F9]	Contest period down (for applicable contests)
[Ctrl][F10]	Contest period up (for applicable contests)
[Shift][F1..F7]	Record messages #1 to #7 (SSB, if supported) or edit message #1 to #7 (CW, Digital)
[Shift][Insert]	Record the message associated to the [Insert] key
[Shift][+]	Records the message associated to the [+] key
[Ctrl][Tab]	Toggle between Run and S&P mode (changes CW / DATA memories)

Windows - Open and Close

[F8]	N + 1 Window
[F9]	Check call Window
[F10]	Check Multipliers Window
[F12]	Check Partials Window
[Alt][A]	DX-Cluster Announcements Window
[Alt][B]	Skeds Window
[Alt][E]	Take a sked
[Alt][I]	Gab Window
[Alt][O]	DX-Cluster Monitor Window
[Alt][P]	Worked Prefixes
[Alt][R]	Rate Window
[Alt][S]	Summary Window
[Ctrl][F9]	Statistics Window

Radio Control

[Alt][:]	Switch active radio (only works on keyboards with unshifted ':')
[Alt][F1]	QSY band down (20 => 40 => )
[Alt][F2]	QSY band up (20 => 15 => )
[Alt][F4]	QSY back to run frequency
[Ctrl][T]	Tune the transmitter (on CW)
[Ctrl][F1] and [Ctrl][F2]	Switch mode up and down (when the contest permits and mode is MIXED or ALL)
[Shift][UpArrow]	RIT + in Run, VFO adjust in S&P. Direction aligned with band map. RIT with MorseRunner.
[Shift][DownArrow]	RIT - in Run, VFO adjust in S&P. Direction aligned with band map. RIT with MorseRunner.
[Shift][Delete]	RIT Clear
[Alt][UpArrow]	VFO adjust. Direction aligned with band map. Can be remapped to [Shift][UpArrow] for SO2R with [Shift] bound to other radio.
[Alt][DownArrow]	VFO adjust. Direction aligned with band map. Can be remapped to [Shift][DownArrow] for SO2R with [Shift] bound to other radio.
[Shift][Alt][UpArrow]	Faster VFO adjust. Direction aligned with band map.
[Shift][Alt][DownArrow]	Faster VFO adjust. Direction aligned with band map.
[Ctrl][Alt][R]	Closes and re-opens serial port and pipe connections to radios, keyers, SO2R devices etc
[Keypad *]	Switch active radio
[Keypad -]	Enable Split Mode

Antenna Control

[Shift][Ctrl][Alt][F1]	Select Rx antenna 1
[Shift][Ctrl][Alt][F2]	Select Rx antenna 2
[Shift][Ctrl][Alt][F3]	Select Rx antenna 3
[Shift][Ctrl][Alt][F4]	Select Rx antenna 4
[Shift][Ctrl][Alt][F5]	Select Rx antenna 5
[Shift][Ctrl][Alt][F6]	Select Rx antenna 6
[Shift][Ctrl][Alt][F7]	Select Rx antenna 7
[Ctrl][F12]	Turn selected rotator to SP direction
[Alt][F12]	Turn selected rotator to LP direction

Bandmap

[Ctrl][Enter]	Insert spot into Band Map
[Ctrl][Up arrow]	Grab the first spot above in the active bandmap and load it in VFO A in active radio (SO1R, SO2R) or active VFO (SO2V).
[Ctrl][Shift][Up arrow]	Grab the first spot, which is a multiplier, above in the active bandmap and load it in VFO A in active radio (SO1R, SO2R) or active VFO (SO2V).
[Ctrl][Alt][Up arrow]	With option "Operating|Bandmap|QSY Opposite radio instead of 2nd VFO" checked: Grab the first spot above in the active bandmap and load it in VFO A of other radio (SO1R, SO2R) or VFO B (SO2V). Otherwise: Grab the first spot above in the active bandmap and load it in VFO B in active radio (SO1R, SO2R, not applicable in SO2V).
[Ctrl][Down arrow]	Grab the first spot below in the active bandmap and load it in VFO A in active radio (SO1R, SO2R) or active VFO (SO2V).
[Ctrl][Shift][Down arrow]	Grab the first spot, which is a multiplier, below in the active bandmap and load it in VFO A in active radio (SO1R, SO2R) or active VFO (SO2V).
[Ctrl][Alt][Down arrow]	With option "Operating|Bandmap|QSY Opposite radio instead of 2nd VFO" checked: Grab the first spot below in the active bandmap and load it in VFO A of other radio (SO1R, SO2R) or VFO B (SO2V). Otherwise: Grab the first spot below in the active bandmap and load it in VFO B in active radio (SO1R, SO2R, not applicable in SO2V).
[Ctrl][Space]	Grab the spot on or near the current frequency
[Ctrl] DoubleClick on a spot	Delete the spot without the warning window
[Alt] DoubleClick on a spot	Load the sub VFO with a spot frequency (if applicable)

DX-Cluster Announcements

[Ctrl] DoubleClick on a spot	Delete the spot without the warning window
[Alt] DoubleClick on a spot	Load the sub VFO with a spot frequency (if applicable)
[Alt][T]	Manually Send a spot or commands to the connected DX Cluster

Networking and chat

[Alt][D]	Pass a station
[Alt][G]	Send a gab
[Ctrl][Alt][G]	Send a ON4KST message
[Alt][I]	Open/Close Gab Window
[Alt][J]	Display status of all stations in the network

SO2R

[Ctrl][Alt][1..8]	Select scenario in SO2R Advanced
[Ctrl][Shift][F1..F8]	On-the-fly scenario editing
[Keypad *]	Focus Opposite Radio

Multi Operator

[Ctrl][F3]

Toggle station type (RUN/Mult in M/S, Run1/Run2 in M/2)

Partner Mode

[Alt][Enter]	Add the call current call to the partner window
[Alt][Space]	Grab the call in the topmost "real time" line of the partner window
[Alt][Backpace]	Clear everything in the partner window
[Alt][1] - [9]	Grab the nth call from the partner window
[Ctrl][1] - [9]	Replace the nth call in the partner window
DoubleClick on a callsign	Grab the call from the partner window

Check Partials & Check N+1

[Alt][Y]	Grab the top guess in Check Partials window (From 2.4.9)
DoubleClick on a callsign	Grab the call

Special Keys for WAE Contest

[Alt][L]	Open QTC RX window
[Ctrl][L]	Open QTC TX window
[Ctrl][F8]	Equivalent to F8 "AGN" but includes row number

Morse Runner Specific

[Ctrl][Alt][Page Up]	Morse Runner increase volume
[Ctrl][Alt][Page Down]	Morse Runner decrease volume
[Ctrl][Alt][Right Arrow]	Morse Runner increase bandwidth
[Ctrl][Alt][Left Arrow]	Morse Runner decrease bandwidth
[Ctrl][Shift][Right Arrow]	Morse Runner increase pitch
[Ctrl][Shift][Left Arrow]	Morse Runner decrease pitch
[Shift][UpArrow]	RIT + in Morse Runner
[Shift][DownArrow]	RIT - in Morse Runner
[Shift][Delete]	RIT clear in Morse Runner

Text functions

CW and Digital Functions

CTSPACE	Equivalent to: Options | CW/DIGI | Shortened spaces (CT spaces) [checked]
CWAUTO or AUTOCW	Equivalent to: Options | CW/DIGI | Auto sending - Sets/disables autosending.
NOCTSPACE	Equivalent to: Options | CW/DIGI | Shortened spaces (CT spaces) [unchecked]
FULLABBREV	Equivalent to: Options | CW/DIGI | Serial number | Abbreviated
PROABBREV	Equivalent to: Options | CW/DIGI | Serial number | Pro
SEMIABBREV	Equivalent to: Options | CW/DIGI | Serial number | Half abbreviated
NOABBREV	Equivalent to: Options | CW/DIGI | Serial number | Not abbreviated
ESM or ESMON	Enable Enter Sends Message Mode; equivalent to: Tools | Data Entry | Enable ESM [checked]
NOESM or ESMOFF	Disable Enter Sends Message Mode; equivalent to: Tools | Data Entry | Enable ESM [unchecked]
LZ	Equivalent to: Options | CW/DIGI | Serial number | Leading zeros [checked]
NOLZ	Equivalent to: Options | CW/DIGI | Serial number | Leading zeros [unchecked]
MSGS or MESSAGES	Equivalent to: Options | CW/DIGI | Modify standard messages
RPT	Equivalent to: Tools | Repeat Loop [checked]
NORPT	Equivalent to: Tools | Repeat Loop [unchecked]
SOUND	Equivalent to: Options | CW/DIGI | No sound [unchecked]
NOSOUND	Equivalent to: Options | CW/DIGI | No sound [checked]
SYNCCW/NOSYNCCW	Enable/disable cw speed syncing between radio/VFO (SO2R and SO2V)
SYNCSPEED	Sync other radio/VFO CW speed with focused radio/VFO (SO2R and SO2V)
WKSETUP or WKEY	Equivalent to: Options | WinKey configuration

Operating and logging

CW, SSB, LSB, USB, AM, FM	Set mode
WORKDUPE or WORKDUPEON	Equivalent to: Options | CW/DIGI | Work dupes [checked] The normal exchange will be sent also to dupes.
NOWORKDUPE or WORKDUPEOFF	Equivalent to: Options | CW/DIGI | Work dupes [unchecked] Causes the $QSOB4 message to be sent to all dupes when, for example, when the [Insert] key is programmed as $LOGGEDCALL $QSOB4 $GUESSEXCH $F2
RUNSP or RUNSPON	Equivalent to: Tools | Data entry | Enable Run/SP switching [checked]
NORUNSP or RUNSPOFF	Equivalent to: Tools | Data entry | Enable Run/SP switching [unchecked]
AUTORSPON or AUTORSP	Equivalent to: Tools | Data entry | Enable automatic Run/SP selection [checked]
AUTORSPOFF or NOAUTRSP	Equivalent to: Tools | Data entry | Enable automatic Run/SP selection [unchecked]

Multi Operating

MULT	Equivalent to: Commands | Station type | Mult
OPON or LOGIN	Log in as an operator
OPOFF or LOGOUT	Log out as an operator
RUN1	Equivalent to: Commands | Station type | Run 1
RUN2	Equivalent to: Commands | Station type | Run 2
RUN	Equivalent to: Commands | Station type | Run

Open/Close/Database Functions

AUTORELOAD	Equivalent to: Options | Load contest at startup [checked]
NOAUTORELOAD	Equivalent to: Options | Load contest at startup | [unchecked]
BYE	Equivalent to: File | Quit
CLEARLOG	Equivalent to: Edit | Delete all QSO
CLEARLOGNOW	Equivalent to: CLEARLOG, but doesn't ask for confirmation
CLOSE	Equivalent to: File | Close
COPYLOG	Save a copy of the current log file in the current log directory with a timestamp added to its name
COPYLOGCLEAR	Equivalent to the COPYLOG but with data truncation. Exact function is TBD.
NEW	Equivalent to: File | New
OPEN	Equivalent to: File | Open
POSTCONTEST	Equivalent to: Edit | Postcontest mode [checked]
NOPOSTCONTEST	Equivalent to: Edit | Postcontest mode [unchecked]
QUIT or BYE or EXIT	Equivalent to: File | Quit
RELOAD or REOPEN	Reopens the current opened log
RELOADNOW or REOPENNOW	Reopens the current opened log, without the contest configuration dialog
WRITELOG or MAKELOG	Equivalent to: File | Creating log files - Create Cabrillo log file

Other Functions

CTYFILES or COUNTRYFILES	Equivalent to: Options | Data files | Country files
DEBUGCAT	Start debugging of radio 1 CAT interface
DEBUGRCAT	Debugging of CAT
DEFINEKEYS	Equivalent to: Options | Redefine keyboard keys
VER or VERSION	Equivalent to: Help | About - Display the about panel
SETUP	Equivalent to: Options | Configure Interfaces
NET or NETON/NONET or NETOFF	Enable/disable network communications
NETCONFIG	Equivalent to: Options | Configure network
ILOCK or ILOCKON	Enable DXLog.net software interlock
NOILOCK or ILOCKOFF	Disable DXLog.net software interlock
REMOTE	Equivalent to: Commands | Remote commands
RESET	Closes and re-opens serial port and pipe connections to radios, keyers, SO2R devices etc