Difference between revisions of "Contest configuration"
Jump to navigation
Jump to search
(→Message macros) |
m (→Message macros) |
||
Line 77: | Line 77: | ||
|Execute script with name ABCD. | |Execute script with name ABCD. | ||
|- | |- | ||
− | |$!DISABLE! | + | |$!DISABLE!ABCD |
− | |Disable | + | |Disable script with name "ABCD". |
|- | |- | ||
− | |$!ENABLE! | + | |$!ENABLE!ABCD |
− | |Enable | + | |Enable script with name "ABCD". |
|- | |- | ||
|$AILOCK | |$AILOCK | ||
Line 90: | Line 90: | ||
|- | |- | ||
|$BANDID | |$BANDID | ||
− | | | + | |Unknown function. |
|- | |- | ||
|$BANDOR | |$BANDOR | ||
Line 123: | Line 123: | ||
|- | |- | ||
|$CURRENTCALL | |$CURRENTCALL | ||
− | + | Equivalent to $CURRENT. | |
|- | |- | ||
|$DELAY=### | |$DELAY=### | ||
Line 129: | Line 129: | ||
|- | |- | ||
|$FOCUS1 | |$FOCUS1 | ||
− | | | + | |Change Focus to Radio 1. |
|- | |- | ||
|$FOCUS2 | |$FOCUS2 | ||
− | | | + | |Change Focus to Radio 2. |
|- | |- | ||
|$FOCUSCALL | |$FOCUSCALL | ||
− | | | + | |Move focus to Callsign field. |
|- | |- | ||
|$FOCUSRCVD | |$FOCUSRCVD | ||
− | | | + | |Move focus to Rcvd field. |
|- | |- | ||
|$FOCUSREC1 | |$FOCUSREC1 | ||
− | | | + | |Move focus to RecInfo field. |
|- | |- | ||
|$FOCUSREC2 | |$FOCUSREC2 | ||
− | | | + | |Move focus to RecInfo2 field. |
|- | |- | ||
|$FOCUSREC3 | |$FOCUSREC3 | ||
− | | | + | |Move focus to RecInfo3 field. |
|- | |- | ||
|$FREQID | |$FREQID | ||
|Unknown function. | |Unknown function. | ||
− | |||
− | |||
− | |||
|- | |- | ||
|$FREQnnn | |$FREQnnn | ||
− | |Sends the frequency of the networked primary radio found on this band. Band nnn is 50, 144, etc. | + | |Sends the frequency of the networked primary radio found on this band. Band nnn is 160, 80...15, 10, 50, 144, etc. |
|- | |- | ||
|$FREQOR | |$FREQOR | ||
Line 163: | Line 160: | ||
|$FREQP | |$FREQP | ||
|Frequency of Radio 1. | |Frequency of Radio 1. | ||
− | |||
− | |||
− | |||
|- | |- | ||
|$FREQPASSnnn | |$FREQPASSnnn | ||
Line 174: | Line 168: | ||
|- | |- | ||
|$F1-$F7 | |$F1-$F7 | ||
− | | | + | |Send the message associated to the function key. |
|- | |- | ||
|$GRABPARTNER | |$GRABPARTNER | ||
Line 228: | Line 222: | ||
|- | |- | ||
|$PILOCK | |$PILOCK | ||
− | |Disable interlock blocking | + | |Disable interlock blocking. |
|- | |- | ||
|$PLUS | |$PLUS | ||
Line 270: | Line 264: | ||
|- | |- | ||
|$RSTEXCHSENT | |$RSTEXCHSENT | ||
− | |Resets the "exchangesent" flag of the active QSO. | + | |Resets the "exchangesent" flag of the active QSO. Useful for ESM scripts. |
|- | |- | ||
|$SERIAL | |$SERIAL | ||
Line 300: | Line 294: | ||
|- | |- | ||
|$TU | |$TU | ||
− | |TU. | + | |Sends "TU". |
|- | |- | ||
|$WAZZONE | |$WAZZONE |
Revision as of 07:25, 10 May 2019
Configuration
Contest configuration
Callsign | The Callsign which will be used during the contest |
Grid square | Your Maidenhead gridsquare (6 letters) which will be used in VHF/UHF/SHF contests for QRB calculations |
Exchange | Contest specific exchange field |
DXCC prefix | your DXCC standard prefix |
WAZ zone | Your CQ zone number |
ITU zone | your ITU zone number |
State/Province/Other | Your US state, Canadian province or DX for all other countries |
Name | The name which will be inserted in the final Cabrillo file |
Address | The address which will be inserted in the final Cabrillo file |
Club | The name of your club for club competitions |
Contest | Select the relevant contest or dxped template |
Category | Select the stations contest operation category |
Overlay | Select the stations contest overlay category (if required). |
Class | Select the stations contest power class. |
Mode | Select the mode of operation for the Contest |
Op. name | Enter the operators name (if required) |
Power | Enter the stations power level (if required) Can be set to 1tt, 4tt, KW etc |
Operators | List of station operators callsigns, separated with a comer |
After pressing enter (or mouse click on OK button) all fields are checked against contest rules defined in contest config file.
If any fields contain incorrect data, DXLog.net will supply a warning with instructions on how to correct the data, It may also show possible links to the contest rules (if link is defined in contest config file).
Message macros
$13 | (Data Modes) send carriage return character. |
$!ABCD | Execute script with name ABCD. |
$!DISABLE!ABCD | Disable script with name "ABCD". |
$!ENABLE!ABCD | Enable script with name "ABCD". |
$AILOCK | Enable interlock blocking. |
$ALTERNATECQ | (or $ACQ) swaps radio focus and sends CQ. |
$BANDID | Unknown function. |
$BANDOR | Returns band of non focused radio. |
$CHECK | send license year. |
$CHECKCALL | move focus to callsign. |
$CLEARRIT | Set RIT to zero on supported radios. |
$CORRECT | Corrected callsign, Nothing if callsign not corrected. |
$CQ | Send CQ on focused radio. |
$CQZONE | Own CQ Zone from Station Data. |
$CR | Execute [Enter] operation. |
$CTRLPLUS | Silent log QSO. |
$CURRENT | Sends current callsign even if $CR present later in the macro. |
$CURRENTCALL
Equivalent to $CURRENT. | |
$DELAY=### | Wait ### Milliseconds. |
$FOCUS1 | Change Focus to Radio 1. |
$FOCUS2 | Change Focus to Radio 2. |
$FOCUSCALL | Move focus to Callsign field. |
$FOCUSRCVD | Move focus to Rcvd field. |
$FOCUSREC1 | Move focus to RecInfo field. |
$FOCUSREC2 | Move focus to RecInfo2 field. |
$FOCUSREC3 | Move focus to RecInfo3 field. |
$FREQID | Unknown function. |
$FREQnnn | Sends the frequency of the networked primary radio found on this band. Band nnn is 160, 80...15, 10, 50, 144, etc. |
$FREQOR | Frequency of the other radio in SO2R. |
$FREQP | Frequency of Radio 1. |
$FREQPASSnnn | Unknown Function. |
$FREQS | Frequency of Radio 1. |
$F1-$F7 | Send the message associated to the function key. |
$GRABPARTNER | Grabs first callsign from the Partner stack. |
$GRABSPOT | Grabs spot from the bandmap on the current frequency. |
$GRID | Maidenhead Locator from Station Data. |
$INSERT | Send message associated with the [INS] key. |
$ITUZONE | ITU Zone from Station Data. |
$LOGQSO | Silently log QSO. |
$MK2R=cmd | Send command to MK2R. |
$MSG1-$MSG12 | Additional CW messages. |
$MYCALL | Callsign set in Station Data. |
$MYDXCC | Own DXCC Prefix. |
$MYITUZONE | ITU Zone from Station Data. |
$MYNAME | sends operator name, set in contest configuration. |
$NEXT | Sends the callsign of the next QSO line when a $CR is included in the message. |
$NEXTCALL | Sends the callsign of the next QSO line when a $CR is included in the message. |
$NEXTSERIAL | Sends next QSO serial number. |
$OPNAME | Sends operator name, set in contest configuration. |
$OTRSP=cmd | Send command to connected OTRSP device. |
$PILOCK | Disable interlock blocking. |
$PLUS | Sends message associated with the [+] key. |
$PREV_RCVD | Previous received serial. |
$PREVSERIAL | previous QSO serial number. |
$QQSLRESET | Reset Quick QSL timer. |
$QSOB4 | Sends the QSOB4 message if "Work Dupes" is not enabled. |
$QSOB4WIPE | Sends the QSOB4 message if "Work Dupes" is not enable and wipes entry field. |
$R1R1 | (SO2R) Sets the headphone audio routing to radio 1 in both ears. |
$R1R2 | (SO2R) Sets the headphone audio routing to radio 1 in left ear and radio 2 in right ear. |
$R2R1 | (SO2R) Sets the headphone audio routing to radio 2 in left ear and radio 1 in right ear. |
$R2R2 | (SO2R) Sets the headphone audio routing to radio 2 in both ears. |
$REPEAT | Restarts the repeating CQ sequence. |
$RESET | Cancels any manual change made in the audio control. |
$RST | Sends report from RST Sent field (normally 5NN). |
$RSTEXCHSENT | Resets the "exchangesent" flag of the active QSO. Useful for ESM scripts. |
$SERIAL | sends current QSO Serial Number, or previous serial number if the log entry field is empty. |
$SETEXCHSENT | Sets the "exchangeSent" flag of the active QSO (useful only for ESM scripts). |
$SPACE | Step Focus (Same as pressing space bar). |
$SPACEBAR | Step Focus (Same as pressing space bar). |
$STATE | Sends State/Province set in contest configuration. |
$SWAPFOCUS | Swap radio focus. |
$TR1 | (SO2R) Transmit Radio 1. |
$TR2 | (SO2R) Transmit Radio 2. |
$TRS | (SO2R) Transmit on opposite radio to focus. |
$TU | Sends "TU". |
$WAZZONE | Own WAZ zone from station configuration. |
$WIPE | Wipe entry field. |
&xy | CW prosign where xy are merged to one character. |
+ | increase CW speed by 4 wpm. |
- | decrease CW speed by 4 wpm. |
^ | Halfspace character in CW. |
~ | At the end of a variable means "no space" will be inserted. |
$13 $CORRECT TU $CR $GRABPARTNER $LOGGEDCALL (EXCH) |