Difference between revisions of "Contest configuration"
Jump to navigation
Jump to search
(→Message macros) |
(→Message macros) |
||
Line 174: | Line 174: | ||
|- | |- | ||
|$GRABSPOT | |$GRABSPOT | ||
− | |Grabs spot from the bandmap on the current frequency. | + | |Grabs spot from the bandmap on the current frequency. (Currently not available) |
|- | |- | ||
|$GRID | |$GRID | ||
Line 258: | Line 258: | ||
|- | |- | ||
|$RCVD | |$RCVD | ||
− | |Sends received exchange without RST. | + | |Sends received exchange without RST. |
|- | |- | ||
|$RECINFO | |$RECINFO | ||
− | |Sends second part of received exchange, if applicable. | + | |Sends second part of received exchange, if applicable. |
|- | |- | ||
|$REPEAT | |$REPEAT |
Revision as of 05:47, 23 May 2019
Configuration
Contest configuration
Callsign | The Callsign which will be used during the contest |
Grid square | Your Maidenhead grid square (6 letters) which will be used in VHF/UHF/SHF contests for QRB calculations |
Exchange | Contest specific exchange field |
DXCC prefix | your DXCC standard prefix |
WAZ zone | Your CQ zone number |
ITU zone | Your ITU zone number |
State/Province/Other | Your US state, Canadian province or DX for all other countries |
Name | The name which will be inserted in the final Cabrillo file |
Address | The address which will be inserted in the final Cabrillo file |
Club | The name of your club for club competitions |
Contest | Select the relevant contest or dxpedition template |
Category | Select the stations contest operation category |
Overlay | Select the stations contest overlay category (if required). |
Class | Select the stations contest power class. |
Mode | Select the mode of operation for the Contest |
Op. name | Enter the operators name (if required) |
Power | Enter the station's power level (if required). Can be set to 1TT, KW, etc. if used for contest exchange. |
Operators | Enter a comma separated list of callsigns of the station operators. |
After pressing enter (or mouse click on OK button) all fields are checked against contest rules defined in contest config file.
If any fields contain incorrect data, DXLog.net will supply a warning with instructions on how to correct the data, It may also show possible links to the contest rules (if link is defined in contest config file).
Message macros
$13 | (Data Modes) Send carriage return character. |
$!ABCD | Execute script with name ABCD. |
$!DISABLE!ABCD | Disable script with name "ABCD". |
$!ENABLE!ABCD | Enable script with name "ABCD". |
$AILOCK | Enable interlock blocking. |
$ALTERNATECQ | (or $ACQ) swaps radio focus and sends CQ. |
$BANDIDpppp | Send band of Radio 1 of station pppp in the network. E.g. $BANDIDMULT will send band of radio 1 of station with ID RUN1. |
$BANDOR | Returns band of non focused radio. |
$CHECK | Send license year. (Function unclear.) |
$CHECKCALL | Check validity of entered callsign (against general and contest rules). |
$CLEARRIT | Set RIT to zero on supported radios. |
$CORRECT | Send corrected callsign. Send nothing if callsign not corrected. |
$CQ | Send CQ on focused radio. (Creates infinite loop if used with key F1.) |
$CQZONE | Own CQ Zone from Station Data. |
$CR | Execute [Enter] operation. |
$CTRLPLUS | Silently log QSO. |
$CURRENT | Sends current callsign even if $CR present later in the macro. |
$CURRENTCALL | Equivalent to $CURRENT. |
$DELAY=### | Wait ### milliseconds. |
$FOCUS1 | Change Focus to Radio 1. |
$FOCUS2 | Change Focus to Radio 2. |
$FOCUSCALL | Move focus to Callsign field. |
$FOCUSRCVD | Move focus to Rcvd field. |
$FOCUSREC1 | Move focus to RecInfo field. |
$FOCUSREC2 | Move focus to RecInfo2 field. |
$FOCUSREC3 | Move focus to RecInfo3 field. |
$FREQIDpppp | Send frequency of Radio 1 of station pppp in the network. E.g. $FREQIDRUN1 will send frequency of radio 1 of station with ID RUN1. |
$FREQnnn | Sends the frequency of the networked primary radio found on this band. Band nnn is 160, 80...15, 10, 50, 144, etc. |
$FREQOR | Frequency of the other radio in SO2R. |
$FREQP | Frequency of Radio 1. |
$FREQPASSnnn | TBD |
$FREQS | Frequency of Radio 2. |
$F1-$F7 | Send the message associated to the function key. |
$GRABPARTNER | Grabs first callsign from the Partner stack. |
$GRABSPOT | Grabs spot from the bandmap on the current frequency. (Currently not available) |
$GRID | The full Maidenhead Locator from Station Data. |
$GRID4 | The first four characters of the Maidenhead Locator from Station Data. |
$INSERT | Send message associated with the [INS] key. |
$ITUZONE | ITU Zone from Station Data. |
$LOGQSO | Silently log QSO. |
$MK2R=cmd | Send command to MK2R. |
$MSG1-$MSG12 | Additional CW messages. |
$MYCALL | Callsign set in Station Data. |
$MYDXCC | Own DXCC Prefix. |
$MYITUZONE | ITU Zone from Station Data. |
$MYNAME | Sends operator name, set in contest configuration. |
$NEXT | Sends the callsign of the next QSO line when a $CR is included in the message. |
$NEXTCALL | Sends the callsign of the next QSO line when a $CR is included in the message. |
$NEXTSERIAL | Sends next QSO serial number. |
$OPNAME | Equivalent to $MYNAME. |
$OTRSP=cmd | Send command to connected OTRSP device. |
$PILOCK | Disable interlock blocking. |
$PLUS | Sends message associated with the [+] key. |
$PREV_RCVD | Previous received serial. |
$PREVSERIAL | Previous QSO serial number. |
$QQSLRESET | Reset Quick QSL timer. |
$QSOB4 | Sends the QSOB4 message if "Work Dupes" is not enabled. |
$QSOB4WIPE | Sends the QSOB4 message if "Work Dupes" is not enable and wipes entry field. |
$R1R1 | (SO2R) Sets the headphone audio routing to radio 1 in both ears. |
$R1R2 | (SO2R) Sets the headphone audio routing to radio 1 in left ear and radio 2 in right ear. |
$R2R1 | (SO2R) Sets the headphone audio routing to radio 2 in left ear and radio 1 in right ear. |
$R2R2 | (SO2R) Sets the headphone audio routing to radio 2 in both ears. |
$RCVD | Sends received exchange without RST. |
$RECINFO | Sends second part of received exchange, if applicable. |
$REPEAT | Restarts the repeating CQ sequence. |
$RESET | Cancels any manual change made in the audio control. |
$RST | Sends report from RST Sent field (normally 5NN). |
$RSTEXCHSENT | Resets the "exchangesent" flag of the active QSO. Useful for ESM scripts. |
$SERIAL | sends current QSO Serial Number, or previous serial number if the log entry field is empty. |
$SETEXCHSENT | Sets the "exchangeSent" flag of the active QSO (useful only for ESM scripts). |
$SPACE | Step Focus (Same as pressing space bar). |
$SPACEBAR | Step Focus (Same as pressing space bar). |
$STATE | Sends State/Province set in contest configuration. |
$SWAPFOCUS | Swap radio focus. |
$TR1 | (SO2R) Transmit Radio 1. |
$TR2 | (SO2R) Transmit Radio 2. |
$TRS | (SO2R) Transmit on opposite radio to focus. |
$TU | Sends "TU". |
$WAZZONE | Own WAZ zone from station configuration. |
$WIPE | Wipe entry field. |
&xy | CW prosign where xy are merged to one character. |
+ | increase CW speed by 4 wpm. |
- | decrease CW speed by 4 wpm. |
^ | Half wordspace character in CW. |
~ | At the end of a variable means "no space" will be inserted. |
$13 $CORRECT TU $CR $GRABPARTNER $LOGGEDCALL (EXCH) |