Contest configuration

Configuration

Contest configuration

Station

Callsign	The Callsign which will be used during the contest
Grid square	Your Maidenhead gridsquare (6 letters) which will be used in VHF/UHF/SHF contests for QRB calculations
Exchange	Contest specific exchange field
DXCC prefix	your DXCC standard prefix
WAZ zone	Your CQ zone number
ITU zone	your ITU zone number
State/Province/Other	Your US state, Canadian province or DX for all other countries
Name	The name which will be inserted in the final Cabrillo file
Address	The address which will be inserted in the final Cabrillo file
Club	The name of your club for club competitions

Contest

Contest	Select the relevant contest or dxped template
Category	Select the stations contest operation category
Overlay	Select the stations contest overlay category (if required).
Class	Select the stations contest power class.
Mode	Select the mode of operation for the Contest
Op. name	Enter the operators name (if required)
Power	Enter the stations power level (if required) Can be set to 1tt, 4tt, KW etc
Operators	List of station operators callsigns, separated with a comer

After pressing enter (or mouse click on OK button) all fields are checked against contest rules defined in contest config file.
If any fields contain incorrect data, DXLog.net will supply a warning with instructions on how to correct the data, It may also show possible links to the contest rules (if link is defined in contest config file).

Message macros

The following commands when entered into a message macro enables automated functions as listed

$13	(Data Modes) send carriage return character.
$!ABCD	Execute script with name ABCD.
$!DISABLE!ABCD	Disable script with name "ABCD".
$!ENABLE!ABCD	Enable script with name "ABCD".
$AILOCK	Enable interlock blocking.
$ALTERNATECQ	(or $ACQ) swaps radio focus and sends CQ.
$BANDID	Unknown function.
$BANDOR	Returns band of non focused radio.
$CHECK	send license year.
$CHECKCALL	move focus to callsign.
$CLEARRIT	Set RIT to zero on supported radios.
$CORRECT	Corrected callsign, Nothing if callsign not corrected.
$CQ	Send CQ on focused radio.
$CQZONE	Own CQ Zone from Station Data.
$CR	Execute [Enter] operation.
$CTRLPLUS	Silent log QSO.
$CURRENT	Sends current callsign even if $CR present later in the macro.
$CURRENTCALL Equivalent to $CURRENT.
$DELAY=###	Wait ### Milliseconds.
$FOCUS1	Change Focus to Radio 1.
$FOCUS2	Change Focus to Radio 2.
$FOCUSCALL	Move focus to Callsign field.
$FOCUSRCVD	Move focus to Rcvd field.
$FOCUSREC1	Move focus to RecInfo field.
$FOCUSREC2	Move focus to RecInfo2 field.
$FOCUSREC3	Move focus to RecInfo3 field.
$FREQID	Unknown function.
$FREQnnn	Sends the frequency of the networked primary radio found on this band. Band nnn is 160, 80...15, 10, 50, 144, etc.
$FREQOR	Frequency of the other radio in SO2R.
$FREQP	Frequency of Radio 1.
$FREQPASSnnn	Unknown Function.
$FREQS	Frequency of Radio 1.
$F1-$F7	Send the message associated to the function key.
$GRABPARTNER	Grabs first callsign from the Partner stack.
$GRABSPOT	Grabs spot from the bandmap on the current frequency.
$GRID	Maidenhead Locator from Station Data.
$INSERT	Send message associated with the [INS] key.
$ITUZONE	ITU Zone from Station Data.
$LOGQSO	Silently log QSO.
$MK2R=cmd	Send command to MK2R.
$MSG1-$MSG12	Additional CW messages.
$MYCALL	Callsign set in Station Data.
$MYDXCC	Own DXCC Prefix.
$MYITUZONE	ITU Zone from Station Data.
$MYNAME	sends operator name, set in contest configuration.
$NEXT	Sends the callsign of the next QSO line when a $CR is included in the message.
$NEXTCALL	Sends the callsign of the next QSO line when a $CR is included in the message.
$NEXTSERIAL	Sends next QSO serial number.
$OPNAME	Sends operator name, set in contest configuration.
$OTRSP=cmd	Send command to connected OTRSP device.
$PILOCK	Disable interlock blocking.
$PLUS	Sends message associated with the [+] key.
$PREV_RCVD	Previous received serial.
$PREVSERIAL	previous QSO serial number.
$QQSLRESET	Reset Quick QSL timer.
$QSOB4	Sends the QSOB4 message if "Work Dupes" is not enabled.
$QSOB4WIPE	Sends the QSOB4 message if "Work Dupes" is not enable and wipes entry field.
$R1R1	(SO2R) Sets the headphone audio routing to radio 1 in both ears.
$R1R2	(SO2R) Sets the headphone audio routing to radio 1 in left ear and radio 2 in right ear.
$R2R1	(SO2R) Sets the headphone audio routing to radio 2 in left ear and radio 1 in right ear.
$R2R2	(SO2R) Sets the headphone audio routing to radio 2 in both ears.
$REPEAT	Restarts the repeating CQ sequence.
$RESET	Cancels any manual change made in the audio control.
$RST	Sends report from RST Sent field (normally 5NN).
$RSTEXCHSENT	Resets the "exchangesent" flag of the active QSO. Useful for ESM scripts.
$SERIAL	sends current QSO Serial Number, or previous serial number if the log entry field is empty.
$SETEXCHSENT	Sets the "exchangeSent" flag of the active QSO (useful only for ESM scripts).
$SPACE	Step Focus (Same as pressing space bar).
$SPACEBAR	Step Focus (Same as pressing space bar).
$STATE	Sends State/Province set in contest configuration.
$SWAPFOCUS	Swap radio focus.
$TR1	(SO2R) Transmit Radio 1.
$TR2	(SO2R) Transmit Radio 2.
$TRS	(SO2R) Transmit on opposite radio to focus.
$TU	Sends "TU".
$WAZZONE	Own WAZ zone from station configuration.
$WIPE	Wipe entry field.
&xy	CW prosign where xy are merged to one character.
+	increase CW speed by 4 wpm.
-	decrease CW speed by 4 wpm.
^	Halfspace character in CW.
~	At the end of a variable means "no space" will be inserted.

Setup for NOW message on RTTY

$13 $CORRECT TU $CR $GRABPARTNER $LOGGEDCALL (EXCH)