|
|
| Line 2: |
Line 2: |
| | | | |
| | ==About== | | ==About== |
| − |
| |
| − | ==Release notes==
| |
| − |
| |
| − | <nowiki>
| |
| − | Ver 2.2.11
| |
| − | ------------------------
| |
| − | - RDXC rules and database updated. (TNX YT3W)
| |
| − |
| |
| − |
| |
| − | Ver 2.2.10
| |
| − | ------------------------
| |
| − | - Mouse middle button click wasn't implemented in secondary decoder window. Fixed. (TNX K6MR, W9PA)
| |
| − | - CW/Digi messages are now saved in appdata folder for each contest type.
| |
| − | Messages are restored from this file when new contest file with same type is created.
| |
| − | - Translation to Italian language is added. (TNX IK2NCJ)
| |
| − | - UBA contest multiplier display corrected by band (not by band/mode). (TNX IK2JUB)
| |
| − | - New contest supported: LA local contest - NRRL Winter Contest. (TNX LB3RE)
| |
| − |
| |
| − | Ver 2.2.9
| |
| − | ------------------------
| |
| − | - Mouse middle button click in digi mode decoder now also adds call to partner stack. (TNX N6TV)
| |
| − | - New option added: Tools->Scripts manager.
| |
| − | DXLog.net now supports custom made C# scripts, to enable additional functionalities.
| |
| − | Custom scripts are written in C# language and they are compiled during runtime.
| |
| − | Script can be assigned to some shortcut and will be executed when shortcut key is pressed.
| |
| − | Also, script can be called by name from CW/Digi message as macro command prefixed with "$!".
| |
| − | For example, if CW/Digi message contains $!SCRIPT1, it will execute script with name SCRIPT1.
| |
| − | - New contest supported: XE RTTY International Contest.
| |
| − | - Added band changes count for Multi/Single category in CQ WPX RTTY Contest.
| |
| − | - CTRL+SHIFT+F4 on the fly scenario/message editor wasn't working properly. Fixed. (TNX IK2NCJ)
| |
| − |
| |
| − | Ver 2.2.8
| |
| − | ------------------------
| |
| − | - Band maximum time and minimum pause time implemented for some Italian contests. Config key = BAND_MIN_LIMITS (TNX IU3AZC)
| |
| − | - New contest supported: Old New Year Contest. (TNX YT3W)
| |
| − | - New contest supported: Popov Memorial Contest. (TNX YT3W)
| |
| − | - SARTG HNY RTTY Contest scoring fixed. DXCC multipliers wasn't counted. (TNX IU3AZC)
| |
| − | - WW PMC Contest. Changed list of multipliers according to new rules. (TNX S54X)
| |
| − | - New option added: Tools->Data entry->Enable grab call from decoder window.
| |
| − | When checked, it will automatically grab last known (highlighted) call from digi mode decoder window.
| |
| − | User can disable this functionality by unchecking it.
| |
| − | In previous version it was always on.
| |
| − | - ALT+CLICK in digi decoder windows now adds call to partner stack.
| |
| − | - New contest supported: UBA PSK63 Prefix Contest.
| |
| − | - $TR macros wasn't implemented correctly when using digi modes. Fixed. (TNX IK2NCJ)
| |
| − | - CONTEST_FIRST_HOUR parameter in contest config file now accepts also minutes value, if specified. (TNX OK5MM)
| |
| − | - PTT sequence implemented. Choose PTT1, PTT2, PTT3 in port configuration to enable this functionality.
| |
| − | PTT pins are executed in following sequence:
| |
| − | 1. PTT + delay for PTT delay ms
| |
| − | 2. PTT1 + delay for PTT seq delay ms
| |
| − | 3. PTT2 + delay for PTT seq delay ms
| |
| − | 4. PTT3 + delay for PTT seq delay ms
| |
| − | - Contest recorder buttons wasn't working properly in floating mode. Fixed. (TNX K6MR, IU3AZC)
| |
| − | - Footswitch (DSR) pin can be used to switch between Radio1/Radio2 input lines now. (TNX SJ2W)
| |
| − | - New contest supported: Cup of Russia CW. (TNX RU3DNN, RK3BX)
| |
| − | - HA DX Contest: contest rules was changed. Fixed. (TNX 9A1AA, 9A7R)
| |
| − | - NA Sprint SSB contest rule changes applied to new config. KH6 mult is added in it. (TNX K6MR)
| |
| − |
| |
| − | Ver 2.2.7
| |
| − | ------------------------
| |
| − | - Code for opening windows in application is optimized. Now it should work much faster.
| |
| − | - CW/Digi keyboard - alternate messages shortcuts wasn't available. Fixed. (TNX HB9BUN)
| |
| − | - Worked DXCC window - in floating mode layout, it wasn't possible to change the continent. Fixed. (TNX IK2NCJ)
| |
| − | - World map window - title bar color selection option was missing in pop-up menu. Fixed. (TNX E77DX)
| |
| − | - Statistics window - controls wasn't resized properly when floating mode was used. Fixed. (TNX IK2NCJ)
| |
| − | - Bandmap list is now scrollable with mouse wheel. (TNX YU7RL)
| |
| − | - Toolbar functionality is finished now.
| |
| − | - Beam heading calculation bugfix. When worked qso with own country, own lat/long was reset to lat/long from qso. Fixed. (TNX W9PA)
| |
| − | - Partner window option "No band/mode filtering" wasn't restored correctly on opening. Fixed. (TNX IK2JUB)
| |
| − | - When using contest with separate periods and SO2R mode, if period was changed from R2 qso line, R1 qso line period wasn't changed. Fixed. (TNX ES7GM)
| |
| − | - DXCC exception database created to add some exceptions for DXCC determination when they aren't covered in CTY file.
| |
| − | For example, it is used to distinguish between KG4 and K for KG4x, KG4xx and KG4xxx callsigns. (TNX IK2JUB)
| |
| − | - New log option available: Always show mode in QSO lines. If checked, it will make column with mode always visible, regardless of FIELD_MODE_VISIBLE
| |
| − | parameter in contest config file. (TNX XE2K)
| |
| − | - 9A CW Contest wasn't scored correctly for outside 9A stations. Fixed. (TNX HB9BUN)
| |
| − | - OK DX RTTY Cabrillo QSO line wasn't align correctly. Fixed. (TNX 9A6SJZ, 9A7R)
| |
| − | - New contest supported: World Wide Iron HAM Contest. (TNX 9A7R)
| |
| − | - DARC XMAS contest - DOK multiplier wasn't calculated correctly. Fixed. (TNX DL2MDU)
| |
| − | - New radio supported: Yaesu FT-3000.
| |
| − |
| |
| − | Ver 2.2.6
| |
| − | ------------------------
| |
| − | - When previous QSO was edited and saved, 10 min rule checking method was called.
| |
| − | In this method, part of code to check if 10 min rule is needed for category was missing. Fixed. (TNX IU3AZC, IK2NCJ)
| |
| − | - If different CW speed for Radio1 and Radio2 was used, only last changed speed was saved and restored to both radios.
| |
| − | Now changed to save each cw speed separately and restoring it correctly. (TNX IK2NCJ)
| |
| − | - Bandmap options "Enable single click selection" and "Display multipliers only" wasn't saved and restored properly. Fixed. (TNX IK2JUB)
| |
| − | - Commands->DX Cluster->Default comment option added. If set, this comment text will be added to each spot sent to DXC. (TNX 9A1AA)
| |
| − | - DXN files are now associated to DXLog.net.exe during installation. You can open log file directly with clicking on it. (TNX IK2NCJ)
| |
| − | - Migrated SQLite dll to version 1.0.94.
| |
| − | - ARRL 10m contest database added. (TNX W9PA)
| |
| − | - Configuration file caching added. Loading/closing application is now much faster.
| |
| − | - New contest supported: HB XMAS Contest. (TNX HB9BUN)
| |
| − |
| |
| − | Ver 2.2.5
| |
| − | ------------------------
| |
| − | - $FREQID macro added. It will send frequency of Radio1 take from defined station in the network
| |
| − | For example: $FREQIDRUN1 will take frequency from station with ID RUN1.
| |
| − | $FREQIDMULT will take frequency from station with ID MULT. (TNX R9IR)
| |
| − | - Target file is now loaded automatically when log is opened if it was previously loaded. (TNX IK2NCJ)
| |
| − | - Radio RUN/S&P mode is now saved to and restored from current log. (TNX IK2NCJ)
| |
| − | - New bandmap option available: enable single click selection. When checked, single click at bandmap will
| |
| − | make spot selection and frequency change.
| |
| − | - New window available: Extra information. Shows extra information from XDT files.
| |
| − | - Check multiplier window - color wasn't set properly when changed from default value. Fixed. (TNX K6MR)
| |
| − | - Popup menu in floating windows mode wasn't shown on all windows correctly because focus was changed to main window automatically. (TNX K6MR)
| |
| − | - New bandmap display options available: Sun, Heading, Long path and Exchange. (TNX IU3AZC, K6ND, N1RR)
| |
| − | - Bandmap windows now shows also number of available spots, new spots, multipliers and points per band.
| |
| − | - Title bar color for each window can be changed now according to user preference.
| |
| − | - Extra information - new plugin is available: www.hamqth.com online lookup.
| |
| − | - New contest supported: RCWC Mini-test.
| |
| − | - TARA RTTY and 10M RTTY contest. RCVD field was set to numeric only. Fixed to accept alpha characters too. (TNX K6MR)
| |
| − | - New contest supported: ARRL 160m contest.
| |
| − | - New contest supported: INORC Contest. (TNX IK2JUB)
| |
| − | - DXC Announcements window: Multipliers only selection wasn't saved to and restored from config file. Fixed. (TNX IK2JUB)
| |
| − |
| |
| − | Ver 2.2.4
| |
| − | ------------------------
| |
| − | - Status window now shows 10 minutes rule timers in different colors.
| |
| − | - Rearrange code to display 10 minute rule errors for multi/single stations.
| |
| − | - New option available: Options->Networking->Don't allow QSO logging if band change rule is broken.
| |
| − | Checked by default. If 10 minute rule is broken, DXLog wouldn't allow to log such QSO.
| |
| − | Error message will be displayed bellow QSO line. (TNX I4UFH)
| |
| − | - Added $NEXTSERIAL / $PREVSERIAL macro commands.
| |
| − | - New contest supported: Estonian local contest called ES-LL-KV. (TNX ES7GM)
| |
| − | - Radio/Ant status window is now resized correctly when using larger fonts and have over 4 antennas on one band. (TNX K6MR)
| |
| − | - Radio/Ant status window antenna selection can be done directly by mouse click on desired selection.
| |
| − | - New option available: Options->Networking->Show different active QSO line color during wait status.
| |
| − | If checked, DXLog.net will change the color of new QSO line during wait period in status window.
| |
| − | There are two different color, one for wait period until last minute, and another one for last minute.
| |
| − | When wait status isn't active, qso line will have normal background color.
| |
| − | - Sked/Pass station. Numeric pad usage was disabled. Fixed. (TNX IK2NCJ)
| |
| − | - $FREQP, $FREQS, $FREQxx macros implemented. "xx" is band for search in the network.
| |
| − | - QTC data for sent QTC's wasn't correctly formatted in Cabrillo export (sent by/rcvd by callsigns where changed). Fixed. (TNX DF1QR)
| |
| − | - QTC frequency was reset to default if QTC was sent/received before QSO is logged. Fixed.
| |
| − | - Cabrillo export is now resorted to include QTC lines between QSO lines according to the time.
| |
| − | - $MK2R=x macro implemented. Send custom commands to microHAM device.
| |
| − | - New contest supported: Russian WW multi mode contest. (TNX YT3W)
| |
| − | - New contest supported: S5 local contest - KV PRVENSTVO ZRS. (TNX 9A4ZM)
| |
| − | - If DXLog.net can't find any device for Playing and/or Recording, MP3 configuration window was broken. Fixed. (TNX IK2NCJ)
| |
| − | - Rate window - new options available.
| |
| − | Set global target qso rate. It will take this number as average qso rate for each hour of the contest and will
| |
| − | compare current qso number with number calculated based on this number. And difference will be shown in rate window.
| |
| − | Show projected score. This will calculate projected score at the end of the contest based on currently loaded target file
| |
| − | and current score. Calculation is done at minute level.
| |
| − | - QSY Wizard window added. When using HamCAP to check propagation data, if chart tab is used, QSY Wizard window will
| |
| − | show possible QSY bands at current time, if HamCAP prediction for qso in that hour is greater of 5 percent.
| |
| − | If not, it will show band labeled as SKED with UTC hour when maximum prediction is found.
| |
| − | - LZ DX Contest - added database for LZ stations exchange. (TNX R9IR)
| |
| − | - DXC Announcements window - optimized code for faster display refresh when lot of data is received from DXC.
| |
| − | - When floating windows mode was used, focus wasn't returned to main window if some of child windows was clicked. Fixed. (TNX K6MR, IK2NCJ)
| |
| − |
| |
| − | Ver 2.2.3
| |
| − | ------------------------
| |
| − | - Some listview objects (status window, bandmap list window) flickered during refresh on WinXP. Fixed.
| |
| − | - Multi/Single QSY counter calculation code optimized.
| |
| − | - Added code to check if location of main screen is visible on some of screens/monitors attached to the system
| |
| − | when restoring location from config file during startup. If it isn't visible, main screen will be shown on
| |
| − | it's default position assigned by OS.
| |
| − | - EU VHF/UHF/SHF contest. During QSO edit, band points was multiplied because one of the object properties wasn't
| |
| − | copied correctly during qso edit. Fixed. (TNX 9A6C)
| |
| − | - FT-990 is now supported.
| |
| − | - When using AlternateCQ macro commands, sometimes first CW character was sent twice. Fixed.
| |
| − | - Added 200ms delay When using $TR1 / $TR2 commands to switch TX radio to wait for interface to switch active radio.
| |
| − | - Macro processing in SSB mode using two radios wasn't implemented correctly. This was creating some blank line logging
| |
| − | errors. Fixed now. (TNX K6MR, N6TV)
| |
| − | - WAE RTTY. QTC receive window isn't modal anymore, so received data can be clicked and transfered to QTC receive window.
| |
| − | This also enable sending standard and additional messages by clicking buttons in decoder window.
| |
| − | Please note that if you want to use shortcuts defined in QTC receive window, it must be focused.
| |
| − | Also, QTC group and number of qsos in QTC should be entered manually to activate fields in QTC receive window.
| |
| − | - ALT+K (Keyboard) RTTY sending was stucked when using 2Tone and buffer was empty. Fixed. (TNX K6MR)
| |
| − |
| |
| − | Ver 2.2.2
| |
| − | ------------------------
| |
| − | - RAEM contest - Lat/Lon field max length had default value of 6 chars. Changed to 7. (TNX R9IR)
| |
| − | - New option available: Commands/Pass frequency. Set passing frequency for station passing.
| |
| − | - New option available: Windows/Skeds (ALT+B). Shows scheduled qso skeds.
| |
| − | - New option available: Commands/Take a sked (ALT+E). Adding qso sked in sked table.
| |
| − | - New option available: Commands/Pass a station (ALT+D). Passing qso to another frequency / station. QSO is added to sked table too.
| |
| − | - Status window now shows QSY frequencies for each station in network.
| |
| − | - All sked changes (add new, modify, delete) are propagated through the network.
| |
| − | - Sked window is displayed automatically if it's not already opened when there are "near time" skeds in the table.
| |
| − | - Passing a station command will automatically popup sked window on all network stations if sked time is within 10 minutes boundaries from actual time.
| |
| − | - World map window - when double clicked at task bar it was maximized. Fixed. (TNX DL8OBQ)
| |
| − | - Networking - code optimized, especially when UDP network type is used.
| |
| − | - Networking - propagating dx spots with QSX comment through network was causing adding additional "*" at the begging of callsign. Fixed. (TNX DL8OBQ)
| |
| − | - Worldmap day/night shadow problem fixed.
| |
| − |
| |
| − | Ver 2.2.1
| |
| − | ------------------------
| |
| − | - New option available: Options->Data files->Update database. This will update your local prefill database from currently opened log. (TNX W9PA)
| |
| − | - DARC 10m contest - adjusted Cabrillo QSO line output according to the rules. (TNX DK9TN)
| |
| − | - Rates window - new options available: Rates Units. (TNX I4UFH)
| |
| − | - INQP - stations working at/from county borders now can be logged in single QSO lines. Up to four county borders on both sides are supported now. (TNX W9PA)
| |
| − | - New contest supported: RAEM International HF Contest.
| |
| − | - Bugfix: click in radio 2 decoder windows on received data was sending data to first radio qso line. Fixed. (TNX K6MR)
| |
| − | - Bugfix: additional CW message shortcuts in CW mode were available only if technique was Advanced SO2R. Fixed. (TNX K6MR, N6TV)
| |
| − | - DOK database refreshed, for usage in WAG contest. (TNX DK9TN, DK8ZZ)
| |
| − | - Winkey - use of speed pot on device is now enabled.
| |
| − | - Callsign background in bandmap view is now changed when radio is at same frequency (+/- bw defined in bandmap properties). (TNX K6ND)
| |
| − | - Time ON/OFF calculation wasn't quite correct because of milliseconds rounding. Fixed. (TNX N6TV)
| |
| − | - Sprint insert key logic wasn't implemented for digi modes. Fixed. (TNX K6MR)
| |
| − |
| |
| − | Ver 2.2.0
| |
| − | ------------------------
| |
| − | - Key remapping - when CTRL/ALT/SHIFT was used in key combination to remap to some other key, status of key was resetted to non pressed. Fixed. (TNX N6TV)
| |
| − | - Key remapping - when two keys function was switched between them, loop was created. Fixed. (TNX N6TV)
| |
| − | - Using additional CW/Digi messages in digi modes was setting tx in manual TX mode (as it is in Keyboard - ALT+K mode). Fixed. (TNX R9IR)
| |
| − | - Yaesu FT-857 CAT protocol should be fixed now to work on same way as FT-897.
| |
| − |
| |
| − | Ver 2.1.8
| |
| − | ------------------------
| |
| − | - New shortcuts/menu options available:
| |
| − | CTRL+ALT+UP - grabs first valid upper spot and sends a frequency to inactive VFO.
| |
| − | CTRL+ALT+DOWN - grabs first valid lower spot and sends a frequency to inactive VFO.
| |
| − | Menu options are:
| |
| − | Operating->Bandmap->Grab first valid upper spot to 2nd VFO
| |
| − | Operating->Bandmap->Grab first valid lower spot to 2nd VFO
| |
| − | Starting point for frequency is inactive VFO frequency. In case that inactive VFO is on different band then active one,
| |
| − | start point will be the frequency from active VFO, so band of inactive VFO will be changed to same as active one. (TNX I4UFH)
| |
| − | - RDA Contest - ADIF export changed to CNTY/STATE. (TNX E73Y)
| |
| − | - RDA Contest - added calculation for Russian "/P" stations. (TNX UA6AA)
| |
| − | - LZ HF Field - new window available - worked callsigns. Shows which callsigns are worked during the contest with information
| |
| − | about when new qso with same station will be available. (TNX 4O3A)
| |
| − | - Band changes counters added for multi/single and multi/two categories in CQ WW RTTY. (TNX EI3JE)
| |
| − | - New option added: Tools->Data entry->Prefill values
| |
| − | Callsign value - when new qso row is initialized, it is automatically prefilled with desired value. (TNX 4O3A)
| |
| − | - OTRSP device - AUX pins wasn't switched correctly. Fixed. (TNX K6ND, N1RR)
| |
| − | - NA Sprint - own multiplier wasn't counted. Fixed. (TNX W9PA)
| |
| − | - All Asian - multiplier window was broken when some special prefix was worked (for example HS50). Fixed. (TNX 9A2NO)
| |
| − | - WAE DX Contest - added some optimization in QTC receive window. QTC's also can be edited after save.
| |
| − | - Azimuth info shown in Check multiplier window was wrong when gridsquare was filled at config screen.
| |
| − | - Bugfix: cat command for SSB mode change was based on current band, not new one, when band was changing with frequency typing in callsign field.
| |
| − | Because of this, when band was changed for example from 40 to 20m mode was set to LSB (current band = 40m) instead of USB (new band = 20m). Fixed. (TNX W9PA)
| |
| − | - Bugfix: worked DXCC window font size wasn't correctly restored when log is opened. Fixed. (TNX W9PA)
| |
| − | - New option available in Radio config screen: Use CI-V (don't poll).
| |
| − | This option will enable usage of CI-V transceive mode for ICOM radios, instead of standard radio cat polling.
| |
| − | In previous versions enabled CI-V transceive mode on some radios caused CAT communication error which disconnects the radio until port is opened again.
| |
| − | - New multipliers added for contest KT KUP Srbije. (TNX YT3W)
| |
| − | - Bugfix: config file for KT KUP Srbije missed Cabrillo operator category for NON-YU category. Fixed.
| |
| − | - SAC Contest: added serial number definition for all categories.
| |
| − | - Single OP 2 VFO mode (SO2V) is now enabled.
| |
| − | - Rate window - qso and multiplier worth informations added.
| |
| − | - DXCluster data manipulation code is completely rewritten to optimize performance.
| |
| − | - Bandmap list sorting options added.
| |
| − | - New option available: Options->Interface specific options->Prevent TX if another radio on same band.
| |
| − | If checked, it will prevent TX if we found another radio (Radio1 vs Radio2 in SO2R mode, or any networked radio if network is enabled) is on same band.
| |
| − | Currently, in network mode, we are comparing our TX radio band with BAND field in network list.
| |
| − | Please note that in case of network failure, we can't determine another radio band, so this should be just temporary solution and some hardware solution
| |
| − | will be much safer for such scenarios. (TNX K6ND, N1RR)
| |
| − | - New shortcut added: comma (',') - brings popup window which allows to enter a list of callsigns which should be added to call stack (partner window).
| |
| − | If callsign field is empty, first call from call stack will be automatically added to callsign field. (TNX DF1QR)
| |
| − | - New shortcuts available: CTRL+ALT+F1..F12 (or AltGr + F1..F12). This will send additional CW/Digi messages (1..12 - check additional message window - ALT+C). (TNX DF1QR)
| |
| − | - Added buttons to access additional messages also at Digi mode decoder windows.
| |
| − | - Starting repeat loop by pressing F1 key is now disabled when station is in S&P mode.
| |
| − | - In digi mode contest when audio frequency correction was used, ALT+F4 QSY'ed to wrong frequency. Fixed.
| |
| − | - ALT+K button in digi mode decoder windows didn't start keyboard mode. Fixed.
| |
| − | - Keyboard (ALT+K) message sending in digi mode was delayed between characters. Fixed.
| |
| − | - Own callsign isn't highlighted anymore in decoder windows. This will prevent to grab it as last known callsign.
| |
| − | - Clock window - added new background color type (S&P background). Each time when focused radio will change mode to S&P,
| |
| − | background color of clock window will be changed to this color.
| |
| − | - Worldmap color had wrong colors for day/night under some circumstances. Fixed. (TNX IZ4AFW)
| |
| − | - Added 100 ms initialization delay, to allow Winkey device to initialize when powered from COM port. (TNX OK4BX)
| |
| − | - Redefine keys wasn't working properly when multiple key combination was remapped. Fixed. (TNX OK4BX)
| |
| − | - New contest supported: Russian WW Digital Contest.
| |
| − |
| |
| − | Ver 2.1.7
| |
| − | ------------------------
| |
| − | - Bandmap data display was broken when callsign with unrecognized DXCC was received from cluster.
| |
| − | - New contest supported: SCC RTTY Contest.
| |
| − | - Fixed some problems with bandmap scrolling for WAE contest. Available QTC number was copied to callsign field. (TNX DK8ZZ, 9A1AA)
| |
| − | - ADIF export - it's possible to add QSO comment for all qsos during ADIF export procedure - for example contest name. (TNX DK8ZZ)
| |
| − | - ADIF export - ADIF_KEYS config key - 3rd parameter available now. If specified, it contains Regex expression to evaluate if field
| |
| − | will be exported for particular QSO.
| |
| − | See RDAC contest definition for first usage example (RDA field is exported only for UA, UA2, UA9, R1FJ and R1MV stations).
| |
| − | - RDAC contest - received RDA value is exported in ADIF now. (TNX 9A2NO)
| |
| − | - New contest supported: SCC RTTY Contest.
| |
| − | - Added prefill database for US/VE stations in CQ WW RTTY contest config. (TNX EI3JE)
| |
| − | - Fixed some issues when bad data was received from CAT interface, mostly due RF problems.
| |
| − | - Network status info window is cleared immediately when network is disabled. (TNX I4UFH)
| |
| − | - Bug fix: dx cluster traffic from clusters connected in network wasn't visible in DXCluster window. Fixed. (TNX I4UFH)
| |
| − | - Show network stream option is added in drop-down of DXCluster window.
| |
| − | If checked, it will show traffic from network connected clusters. By default it is checked. (TNX I4UFH)
| |
| − | - DXCluster window now shows traffic from network in different color.
| |
| − |
| |
| − | Ver 2.1.6
| |
| − | ------------------------
| |
| − | - New contest supported: NRAU NAC Open V/U/SHF Contest.
| |
| − | - New contest supported: NRAU NAC 10M Contest.
| |
| − | - New contest supported: IARU Region 1 Fieldday (RUS). (TNX UA6AA)
| |
| − | - Fixed perfomance issues when huge amount of spots are received from DXCluster (or Skimmer).
| |
| − | - New option available: Tools->Data entry->Use INSERT mode in RCVD fields.
| |
| − | Switch to INSERT mode instead of OVERWRITE mode in all RCVD fields. Default is not checked.
| |
| − | - DXCluster reconnect functions are implemented now.
| |
| − | If DXCluster can't be connected, DXLog.net will try to establish connection again each 30 seconds.
| |
| − | In case of inactivity, if there isn't any data received from DXCluster in period of 120 seconds, DXCluster
| |
| − | is disconnected and reconnection procedure is started.
| |
| − | - EDI export is expanded to include bonus for WWL's worked (CWWLB tag). (TNX RO2F)
| |
| − | - EDI info tags are now prefilled with info from Contest config screen. (TNX RO2F)
| |
| − | - Bandmap is now automatically expanded to enable visibility of higher frequencies. (TNX RO2F)
| |
| − | - Final score calculation custom formula regional setting wasn't set to "en-US". Fixed. (TNX KB9S)
| |
| − | - Goto QSO window (CTRL+G) was accidentaly replaced by Target QSO per hour window. Fixed. (TNX IK2JUB)
| |
| − | - IARU R1 DARC contest config file. Cabrillo line definition fixed according to the rules. (TNX IK2JUB)
| |
| − | - HQ database lookup added for IARU HF Championship and WRTC 2014 Contest. (TNX SA6AQP)
| |
| − | - VHF/UHF/SHF contest definition can used bonus points per band. Added in EU V/U/SHF definition.
| |
| − | - New networking options available. UDP type broadcasting can be used now for local network. Also this
| |
| − | can be used in combination with client/server infrastracture which enable usage of multiple subnets, routing etc.
| |
| − | - OTRSP compatible devices are supported now. Currently tested with YCCC SO2R+ box. (TNX OE1EMS/E77DX, S58A).
| |
| − | - Available QTC number is now visible in Bandmaps. (TNX IZ3EYZ).
| |
| − | - Hide dupes and invalids are now separated as two choices in bandmap popup menu. (TNX IZ3EYZ)
| |
| − | - Morse Runner integration implemented. You can now simulate contest if Morse Runner is active.
| |
| − | Simulation is started with menu choice: Tools->Data entry->Enable Morse Runner simulation.
| |
| − | PageUp/PageDown can be used as rit control (Up/Down arrows in Morse Runner).
| |
| − | - COM object called DXLog.net.COM.COMInfo is now available. It provide some information need for integration with
| |
| − | external applications. First implementation will be used for adding new plugin for ACOM Tools application, to send
| |
| − | frequency data to ACOM 2000A amplifier. COM object can easily be accesed from simple vb or java script, or another
| |
| − | application.
| |
| − | - New contest config key available: ADIF_KEYS.
| |
| − | It can be specified multiple times. It's used to specify ADIF export definition. Contains key+value pair, separated by ";".
| |
| − | Key = ADIF key. Value = C# expression for evaluation. $VALUE in expression contains reference to DXQSO object.
| |
| − | - Export to ADIF for IOTA contest now exports IOTA reference too. (TNX 9A2NO, DK8ZZ)
| |
| − |
| |
| − | Ver 2.1.5
| |
| − | ------------------------
| |
| − | - Load contest at startup was broken because country file is loaded too late in previous version. Fixed.
| |
| − | - Problem with WPX determination for calls such as 7QNL fixed. (TNX UA6AA)
| |
| − |
| |
| − | Ver 2.1.4
| |
| − | ------------------------
| |
| − | - CH canton removed in Helvetia contest. (TNX HB9ELV)
| |
| − | - Volga contest config file serial number alignment was left, instead of right. Fixed. (TNX RW4NW)
| |
| − | - SCP database lookup from external database is now disabled for WRTC contest type. Only "In log search" is allowed.
| |
| − | - New contest config parameter - DXCC_DB_USE_ARRL_LIST. Allows to use ARRL country list instead of CQ country list.
| |
| − | This means that all countries from CTY.dat file with main prefix starting with '*' sign will be ignored.
| |
| − | - UA2 QSO party - 40m band filter was wrong in points calculation in config file. Fixed. (TNX 9A1AA)
| |
| − | - VC 2010 RTM check removed from setup because of problems with Win8.1. (TNX UA6AA, E73Y)
| |
| − | - Information on targets tab in statistics window wasn't refreshed properly when new qso was logged. Fixed. (TNX 9A1AA)
| |
| − | - Target file export fixed to include hours with zero qsos. This is needed to properly display hourly comparisions.
| |
| − |
| |
| − | Ver 2.1.3
| |
| − | ------------------------
| |
| − | - Gray line map now shows grayline twilight zone (civil or nautical). Also, it can show graylight zone based on D and F layer calculations. (TNX N6TV)
| |
| − | - New contest supported: New England QSO party (NEQP).
| |
| − | - New contest supported: 7th Call Area QSO party (7QP).
| |
| − | - INQP config adjusted to accept entries from 7QP and NEQP. (TNX W9PA)
| |
| − | - New contest supported: Russian Championship. (TNX YT3W)
| |
| − |
| |
| − | Ver 2.1.2
| |
| − | ------------------------
| |
| − | - During QSO saving in ESM mode, CW keyer was sending first letter of previously logged callsign before "TU" message. Fixed. (TNX YU7RL)
| |
| − | - Option "Tools->Data entry->ESM mode change focus on $LOGGEDCALL macro" state wasn't properly restored after restart. Fixed.
| |
| − | - DXCluster window opening (ALT+O) was broken if stream history logging was active under some circumstances. (TNX YU7RL)
| |
| − | - New contest supported: Indiana QSO party - INQP.
| |
| − | - Grayline world map is now available.
| |
| − | - Sunset/Sunrise time calculation algorithm changed.
| |
| − | - Added sunset/sunrise colors to clock window.
| |
| − | - New contest supported: UA1DZ Memorial Cup.
| |
| − | - When Shift+Fx key was pressed while recording was already in progress, error exception was shown. Fixed. (TNX DF1QR)
| |
| − | - Due to moving log to SQLite format, QSO times were converted to local time zone when log was loaded, instead of UTC. Fixed.
| |
| − |
| |
| − | Ver 2.1.1
| |
| − | ------------------------
| |
| − | - DXN file format is now changed to SQLite database format.
| |
| − | - QTC file is now included in DXN file, separate file isn't needed anymore.
| |
| − | - ADIF export: OPERATOR field is visible in operator logged during qso logging. (TNX DF1QR)
| |
| − | - Repeat timer wasn't refreshed when changed with RPT text command. (TNX JG1VGX)
| |
| − | - Fixed some problems with dx cluster stream / spot logging. Code works much faster now.
| |
| − | - ALT+Y and CTRL+F3 shortcuts now changing station type for active qso line.
| |
| − | If active line is new qso line, station type is changed for all new qsos. (TNX OK1RI)
| |
| − | - New text commands added: RUN, MULT, RUN1, RUN2 - change station type according to text command.
| |
| − | - Cabrillo file is now sorted during export according by time of qso, sent serial number (if contest uses one) and qso id.
| |
| − | - Band changes are now calculated together with rates when scrolling through the log. (TNX OK1RI)
| |
| − | - URAL Cup contest - sent nr field was hidden. Fixed. (TNX R9IR)
| |
| − | - New contest supported: DIG QSO Party.
| |
| − | - Load/Export target files options added.
| |
| − | - New statistics options available. Targets are now visible in Statistics window and can be compared with actual log.
| |
| − | - Statistics by continent available.
| |
| − | - Copy as image option added to statistics and summary windows.
| |
| − | - Copy as text option added to statistics window.
| |
| − | - CQ MM DX contest config live score contest name parameter added to allow posting of score to cqcontest.net. (TNX PY3KN)
| |
| − | - Helvetia contest config line to calculcate HB->DX qso correctly. (TNX HB9DUR)
| |
| − | - Frequency warning file added for Helvetia contest. (TNX HB9DUR)
| |
| − | - File->Export->Summary file option added.
| |
| − | - During Cabrillo export, user is prompted for Summary file creation.
| |
| − | - When ALT-F4 (return to CQ freq) command was issued in case of Yaesu FT2000/5000 radio, sub vfo (VFO-B) tx was always activated. Fixed. (TNX RZ3AZ)
| |
| − |
| |
| − | Ver 2.1.0
| |
| − | ------------------------
| |
| − | - Number server was broken because of changes regarding number reservation per station type. Fixed during WPX SSB.
| |
| − | - If number server is used, when callsign is double clicked in bandmap or dxcann window, number isn't reserved automatically anymore until spacebar isn't pressed.
| |
| − | It doesn't depend on station type anymore.
| |
| − | - Bugfix: QSO editor. When some space characters after received report were deleted, exception was raised after moving focus back to Rcvd field.
| |
| − | - LOCATION tag in Cabrillo added for CQ WPX Contest.
| |
| − | - CATEGORY-OVERLAY is removed if overlay value is empty.
| |
| − | - Gab window is now hidden automatically after 15 sec delay, if it was opened automatically when GAB message was sent/received. (TNX NQ4I)
| |
| − | - EA PKS63 and EA RTTY contest. Received exchange was copied from previous qso always. Config changed so copy works only for qsos with EA/EA6/EA8/EA9 stations. (TNX 9A6SJZ)
| |
| − | - Yuri Gagarin cup - config changed according to the rules for 2014 - KEDR stations. (TNX IK2JUB)
| |
| − |
| |
| − | Ver 2.0.25
| |
| − | ------------------------
| |
| − | - Contest recorder - drop down menu option MP3 Configuration wasn't implemented. Fixed. (TNX DK8ZZ)
| |
| − | - New interlock options added. Interlocking is now possible between multiple stations.
| |
| − | It can be defined fixed (with multiple station IDs) or dynamically, based on status info received in network.
| |
| − | Possible options are:
| |
| − | 1. Interlock with station(s) on same band
| |
| − | 2. Interlock with station(s) on same band+mode
| |
| − | 3. Interlock with all stations visible in status list
| |
| − | Dynamic station list is built when TX is requested from info available in status list in that point of time.
| |
| − | - In multi op environment, when number server is used, number is automatically reserved when callsign bandmap or dx announcements window is
| |
| − | double clicked only if station type isn't Mult or Support.
| |
| − | - New contest supported: OK/OM DX SSB contest. (TNX OK1RI)
| |
| − | - Bugfix: when voice message was recording and play message was started before recording is stopped, DXLog.net was crashed. Fixed. (TNX W9PA)
| |
| − | - Bugfix: K3 SPLIT CAT command wasn't implemented properly. Fixed. (TNX W9PA)
| |
| − | - Bugfix: Radio internal DVK usage was broken. (TNX IK2NCJ, IK1HJS)
| |
| − | - Parsing DX spot comments for QSX frequency added. DXLog.net now looks for "QSX" text in comment and trying to parse valid frequency.
| |
| − | If frequency is found, spot callsign will be marked with "*" before callsign and double click on such spot will change radio to split mode
| |
| − | immediately. Valid QSX in comment can be full frequency or just KHz part. For example: QSX 3662 or QSX 662 will set split frequency
| |
| − | to 3.662 in both cases. (TNX W9PA)
| |
| − | - Bandmap callsign color for multipliers was wrong for some contests when contest period was changed and received data wasn't copied
| |
| − | by default from previous qsos. In that cases, DXLog.net needs to find data from guess database. Fixed. (TNX YT3W, 9A1AA, YU7RL).
| |
| − | - Warning message added when duplicate contest definition is found in AppData folder. Only first file with definition is loaded,
| |
| − | any other file with definition for same contest name will be discarded and user will be notified about these files.
| |
| − | - New option available: Edit->Edit serial number. This allows to edit serial number for previous or current QSO entries. (TNX YU7RL).
| |
| − | - Sent serial number field for previous qso is now accessible by pressing TAB key, so user can easily edit sent serial number for previous qso. (TNX N6TV)
| |
| − | - Bugfix: cat command for SSB mode change was based on current band, not new one. Because of this, when band was changed from 40 to 20m
| |
| − | mode was set to LSB (current band = 40m) instead of USB (new band = 20m). Fixed. (TNX W9PA)
| |
| − | - CQ WPX band changes rule for multi op stations (M/S & M/2) fixed according to the rules.
| |
| − | - JT65 mode added to DXpedition contest definition. (TNX E70T)
| |
| − | - Bugfix: DXCluster list editor exception happens when duplicate entries exists in cluster names. (TNX K3UK, N6TV)
| |
| − | - $ALTERNATECQ / $ACQ macro fixed, together with new definition for AlternateCQ scenario. (TNX IK2NCJ)
| |
| − | - CQ-MM contest definition fixed according to the rules. (TNX VE2EBL)
| |
| − | - SMR multiplier added to His Majesty The King of Spain contest. (TNX YT3W)
| |
| − | - New contest supported: BDM RTTY WW Contest. (TNX YT3W)
| |
| − | - New contest supported: QRP HF RTTY Contest. (TNX YT3W)
| |
| − | - New contest supported: FOC BW QSO PARTY. Added FOC members database. (TNX F5IN)
| |
| − | - Ctrl+Shift+Fx key now opens message editor (or on the fly scenario editor), beacuse Shift+Fx in SSB mode starts message recording. (TNX IK2NCJ)
| |
| − |
| |
| − | Ver 2.0.24
| |
| − | ------------------------
| |
| − | - ADIF import was broken when dxcc of callsign wasn't recognized correctly or callsign contains "EOR" text. (TNX E73Y)
| |
| − | - NAQP RTTY - RCVD field length expanded to same length as NAQP. (TNX KB9S)
| |
| − | - Cabrillo export definition checking added to prevent exceptions from export routine if Cabrillo line definition is missing in config file. (TNX DL1MAJ)
| |
| − | - VHF guess database lookup was broken after SCP & database optimization. Fixed. (TNX DL1MAJ)
| |
| − | - Contest recording is added.
| |
| − | - MMVARI form closing was causing runtime error. Fixed.
| |
| − | - Upgraded ObjectListView objects to v2.7.0.
| |
| − | - Different color for double multiplier is now available in Bandmap and DXC Announcements windows. (TNX IK2JUB)
| |
| − | - Hide dupe / invalid qsos and Display multipliers only settings are now saved in config and restored when log is opened / created.
| |
| − | - CWT config changed (new bands added). (TNX SA6AQP)
| |
| − | - CWOps database updated. (TNX SA6AQP)
| |
| − |
| |
| − | Ver 2.0.23
| |
| − | ------------------------
| |
| − | - Digital modes recognition from bandplan when spot is received from DXC fixed. (TNX W9PA)
| |
| − | - Worked prefixes window was broken under some circumstances. Fixed. (TNX W8AKS)
| |
| − | - New rules for EA RTTY and EA PSK63 contest implemented. (TNX EA4ZK)
| |
| − | - Bandmap editor implemented. Check Bandmap properties in radio 1 or radio 2.
| |
| − | There are 10 different bandmaps available, default one which comes with installation and 9 which can be
| |
| − | saved by user.
| |
| − | - Check partials and Check N+1 display order is changed now. N+1 algorithm is fixed.
| |
| − | This windows now shows data first in following order:
| |
| − | 1. already worked calls, but not dupe
| |
| − | 2. dupe calls
| |
| − | 3. all other calls
| |
| − | In each of these three groups, callsigns are sorted alphabetically.
| |
| − | - SCP is now rewritten to optimize performance. Regex queries removed.
| |
| − | - Cabrillo "LOCATION" tag added for ARRL contests.
| |
| − | - Databases for YU and E7 local contests are refreshed now. (TNX YU7RL)
| |
| − | - Live score auto posting setting is now remembered in dxn file and restored when file is opened.
| |
| − |
| |
| − | Ver 2.0.22
| |
| − | ------------------------
| |
| − | - Wednesday MinTest Cabrillo output fixed according to the rules. (TNX RZ3AZ/UA5C)
| |
| − | - QTC network synhronization didn't worked properly for WAE RTTY contest.
| |
| − | - New contest supported: WRTC 2014.
| |
| − | - New option available: Commands->Live score->Use UDP broadcast. If checked, score will be broadcasted to selected
| |
| − | IP address/port instead of making post via http, as requested by WRTC 2014 committee.
| |
| − | - OK/OM DX Cabrillo fixed according to format requested by contest robot.
| |
| − | - WWPMC contest config check was broken. Fixed. (TNX 9A4CD)
| |
| − | - Multiplier check routine from recinfo field was broken and call wasn't added to bandmap when received
| |
| − | from dxcluster. Fixed.
| |
| − | - NAQP rcvd field expanded to support longer names. (TNX W9PA)
| |
| − | - NAQP config fixed by the rules. (TNX W9PA)
| |
| − | - Network time server was creating time info packets with local time info, instead of UTC. Fixed now.
| |
| − | - Regex processing routing had bug when processing RCVD field under some conditions. Fixed now. (TNX IK2NCJ)
| |
| − | - New contest supported: BALKAN HF CONTEST.
| |
| − | - New contest supported: Tesla Memorial HF CW Contest.
| |
| − | - Marconi Memorial HF CW Contest config file changed according to the new contest rules. (TNX IK6BAK)
| |
| − | - Multiplier count for NA Sprint contest fixed according to the rules. (TNX W9PA)
| |
| − | - Added prefill database for NA Sprint. (TNX W9PA)
| |
| − |
| |
| − | Ver 2.0.21
| |
| − | ------------------------
| |
| − | - FileStream buffer wasn't correctly flushed to disk, which caused corruption of DXN file. Fixed now.
| |
| − | - OK/OM DX Cabrillo export fixed error with received field.
| |
| − | - New contest supported: WAEDC RTTY.
| |
| − | - Fixed some bugs in QTC Send screen. (TNX R9IR)
| |
| − |
| |
| − | Ver 2.0.20
| |
| − | ------------------------
| |
| − | - New contest supported: JARTS WW RTTY Contest. (TNX 9A7R)
| |
| − | - New contest supported: Kirov region cup. (TNX RM4N)
| |
| − | - VGE SPRINT contest fixed according to the rules. (TNX EA4ZK)
| |
| − | - Rate display refresh was broken when entering new qso. It was only refreshing during log scrolling. Fixed.
| |
| − | - Fixed WAG Cabrillo import problem. (TNX DF1LX)
| |
| − | - ARRL Sweepstakes: added prefill database. (TNX W9PA)
| |
| − | - New contest supported: OH local contest Viitosten Syysottelu. (TNX OH6XX)
| |
| − | - New contest supported: DARC 10m DIGITAL Contest (Corona). (TNX YT3W)
| |
| − | - New contest supported: ARRL RTTY Roundup. (TNX YT3W)
| |
| − |
| |
| − | Ver 2.0.19
| |
| − | ------------------------
| |
| − | - Send spot (ALT+F3) window wasn't shown if DXCluster was disconnected but network connection was active. Fixed. (TNX NQ4I)
| |
| − | - Partner window callsign double click and popup delete and delete all function wasn't implemented. Fixed. (TNX G4BYG)
| |
| − | - New macro commands supported:
| |
| − | $SPACEBAR - same as $SPACE (press spacebar in currently active field)
| |
| − | $CHECKCALL - move focus to callsign and press spacebar
| |
| − | $GUESSEXCH - try to guess exchange, focus stays in currently active field
| |
| − | $LOGQSO - silently save QSO (useful in ESM + S&P mode)
| |
| − | $CTRLPLUS - same sa $LOGQSO
| |
| − | $FOCUSCALL - move entry focus to Callsign field
| |
| − | $FOCUSRCVD - move entry focus to Rcvd field
| |
| − | $FOCUSREC1 - move entry focus to RecInfo field
| |
| − | $FOCUSREC2 - move entry focus to RecInfo2 field
| |
| − | $FOCUSREC3 - move entry focus to RecInfo3 field
| |
| − | $FOCUS1 - change Focused radio to Radio 1
| |
| − | $FOCUS2 - change Focused radio to Radio 2
| |
| − | $SWAPFOCUS - change Focused radio to opposite Radio
| |
| − | $GRABPARTNER - grab next call from partner window into callsign field in current entry line
| |
| − |
| |
| − | - New bandmap properties available:
| |
| − | - Bandmap entries added by the operator - Clear log fields: Always, Never, When dupe.
| |
| − | Defines if log entry will be cleared or not when entry is added to bandmap manually.
| |
| − | - Search & Pounce options
| |
| − | - Wipe QSO - Log entry will be cleared if radio frequency is changed
| |
| − | - Populate bandmap - Current log entry will be added to bandmap if radio frequency is changed
| |
| − | - Only if callsign looks valid - bandmap will be populated if callsign looks like valid callsign
| |
| − | - Frequency change threshold - defines for how many Hz radio frequency needs to be changed to activate previous function
| |
| − | - Send spot automatically when QSO is logged
| |
| − | If checked, when radio is in S&P, DXC spot will be automatically send to DXC when QSO is logged.
| |
| − | - New contest supported: EA local contest - Concurso Nacional de Sufijos (CN de Sufijos)
| |
| − | - Bugfix: Bandmap spots (list data) wasn't refreshed always when band was changed, because radio band property was changed
| |
| − | after event was raised. Fixed. (TNX IK2NCJ)
| |
| − | - WAG contest: added warning messages in warning file type (see wag_warning.txt in database directory). (TNX DL8MBS)
| |
| − | - New option available: Tools->Data entry->Enable CW Cut Numbers Translation.
| |
| − | When checked and if RCVD field accepts only numeric characters, RCVD field will accept A, N, T, E & U characters also.
| |
| − | These five characters will be translated druing QSO save procedure into: 1, 9, 0, 5 & 2. (TNX N6TV)
| |
| − | - New contest supported: EA local contest SPRINT VGE. (TNX EA4ZK)
| |
| − | - New window available: Operating info. Shows operating data information such as Radio1/2 mode, RUN/SP mode, TX/RX status, listening
| |
| − | mode status, CW WPM speed etc.
| |
| − | - Radio1 & Radio2 WPM speed can be defined for each radio if Options->CW->Enable different R1/R2 speed is checked. Default is checked.
| |
| − | - New text commands available:
| |
| − | - NOSYNCCW - enable different R1/R2 speed (no CW speed synchronization)
| |
| − | - SYNCCW - disable different R1/R2 speed (CW speed for R1 and R2 are synchronized)
| |
| − | - SYNCSPEED - set opposite radio CW speed to same value as focused radio CW speed
| |
| − | - DOK database new version included. (TNX DK5TX)
| |
| − |
| |
| − | Ver 2.0.18
| |
| − | ------------------------
| |
| − | - Interlock - New option added: "Last one wins if msg is"
| |
| − | If checked, this will interrupt interlocked radio tx when msg on the air is one of selected messages in
| |
| − | "If is/not msg" drop down items.
| |
| − | - CQP_db.txt prefill database added in distribution. (TNX W9PA)
| |
| − | - Callsigns from database files are now shown in Check partials and N+1 windows even if they don't exists in SCP file.
| |
| − | - If time delimiter in regional settings was different than ":", exception was raised. Fixed to accept any delimiter. (TNX IK2NCJ)
| |
| − | - Network partner mode is now supported.
| |
| − | - TRC contest prefill database added. (TNX F5IN)
| |
| − | - New option available: ESM mode change focus when LOGGEDCALL macro sent.
| |
| − | If checked, $SPACE macro will be activated each time when $LOGGEDCALL macro is sent and ESM mode is active.
| |
| − | Default is unchecked.
| |
| − | - OmniRig com object wasn't release properly on application close. Fixed. (TNX N6TV, JG1VGX)
| |
| − | - Some Yaesu models didn't display split mode properly in bandmap indicators. Fixed. (TNX JG1VGX)
| |
| − | - Digi mode freq correction was wrong in case of PSK modes when LSB mode was used on radio. Fixed. (TNX DK8ZZ)
| |
| − | - Bandmap freq display was too big when using large fonts in Windows. Fixed. (TNX 9A3XV)
| |
| − | - Automatic RUN/SP mode switching is now available. You can enable/disable this with menu option
| |
| − | Tools->Data entry->Enable automatic RUN/SP selection or by text commands (AUTORSP/AUTORSPON and NOAUTORSP/AUTORSPOFF).
| |
| − | When enabled, it will switch DXLog to SP mode when you change frequency for more then 200 Hz from CQ frequency.
| |
| − | When you are back within 200 Hz of CQ frequency, you will be switched back to RUN mode.
| |
| − | If you change RUN/SP mode manually, this function is disabled until first message (F1..F7, INS, PLUS) isn't sent.
| |
| − | By default, this isn't enabled. (TNX 9A3XV)
| |
| − | - Exchange guessing logic fixed. Now it always set field flags to unchanged when they are prefilled from previous qso or
| |
| − | callsign databse. (TNX N6TV)
| |
| − | - When callsign was double clicked in bandmap or announcements window and DXLog should change frequency and mode,
| |
| − | order of CAT commands was wrong. Mode command should be sent before frequency command. Fixed. (TNX E77DX/OE1EMS).
| |
| − | - RIT functions are now available from DXLog.net. SHIFT+UP, SHIFT+DOWN and SHIFT+DEL shortcuts have such functions.
| |
| − | SHIFT+DEL clears RIT. SHIFT+UP/DOWN moves ritoffset 10 Hz (ore one step) down and up. Please note that SHIFT+UP moves
| |
| − | rit offset in minus direction to work in same way as CTRL+UP which grabs first upper spot from band map (lower frequency).
| |
| − | - $13 macro added. This will send carriage return (CR) character in digi modes.
| |
| − | - New options available in Radio setup screen:
| |
| − | ICOM CI-V address: you can change default CIV address for ICOM radio here if needed.
| |
| − | Use radio internal DVK: if checked, DXLog.net will send command to radio to start playing prerecoder message in radio internal voice keyer.
| |
| − | Use CAT PTT command on phone: if checked, when mode is phone, CAT tx command will be sent to radio to start TX.
| |
| − | - Stopping the message (escape key) when working in Advanced SO2R mode now works on the following way:
| |
| − | 1. If listen mode is stereo ($R1R2) when esc is pressed, listen mode will stay stereo.
| |
| − | 2. If listen mode is mono ($R1R1 or $R2R2) when esc is pressed, listen mode will be changed to the mode which was active at message start. (TNX N6TV)
| |
| − | - F11/ALT+W (wipe) function was stopping REPEAT mode. Fixed. (TNX N6TV)
| |
| − | - CTRL+G function didn't set properly active qso line when moving in the log. Fixed. (TNX N6TV)
| |
| − | - New options available: Tools->Message editors.
| |
| − | - Enabled SO2R scenario on the fly editor - if checked and operating mode is advanced SO2R, editor for standard message (SHIFT+F key)
| |
| − | will show also active SO2R macro lines for radio1 and radio2, so you can edit it quickly without opening full scenario editor.
| |
| − | - On the fly editor focus on scenario line - if checked, when on the fly editor window is shown, line with focus will be radio 1 or
| |
| − | radio 2 scenario (depends if user pressed SHIFT+F key in when radio 1 or radio 2 has focus). If not checked, standard cw message
| |
| − | line will be focus. Of course, user can change focus in the editor screen by pressing on TAB - SHIFT/TAB key. (TNX IK2NCJ, N6TV)
| |
| − | - New shortcuts available:
| |
| − | ALT + UP/DOWN - changes radio frequency for 10 Hz
| |
| − | SHIFT + ALT + UP/DOWN - changes radio frequency for 100 Hz
| |
| − | - Bandmap "jumping" when spot is clicked is now fixed. This was happening because frequency was set to radio object and sent to CAT.
| |
| − | Now, if radio object exists (cat mode is active), frequency is just send to CAT, and when received from radio, it is changed on
| |
| − | the screen. If CAT is not used, frequency will be just changed in bandmap.
| |
| − | - New option available: Operating->Carrier (CTRL+T). Allows you to tune the radio.
| |
| − | - Bug fix: COPYLOG and COPYLOGCLEAR functions were reversed. Fixed. (TNX N6TV)
| |
| − | - Bug fix: no word space is sent between logged call and serial no, for early QSOs (1-9). (TNX N6TV)
| |
| − | - Bug fix: CTRL+TAB/CTRL+SHIFT+TAB implementation was wrong when focus was on radio 2. (TNX N6TV)
| |
| − | - Bug fix: ESM mode. Now sends correctly exchange when in S&P mode. (TNX N6TV)
| |
| − | - Bug fix: old spots loaded from history file. Fixed, now loads only spots not older then 30 minutes. (TNX N6TV)
| |
| − | - Bug fix: Check Callsign window doesn't update until you hit spacebar. Now updates immediately when match is found if auto exchange guessing is on. (TNX N6TV)
| |
| − | - Bug fix: After logging a QSO with PLUS, that callsign didn't immediately show up in the Check Mult window on the just-logged band. Fixed. (TNX N6TV)
| |
| − | - Bug fix: Hitting [Plus] when a QSO line is completely empty displayed red error message "Callsign needs at least one number". Fixed. (TNX N6TV)
| |
| − | - Bug fix: F7 (sending a question mark) didn't *immediately* halt a repeating CQ. Fixed. (TNX N6TV)
| |
| − | - Bug fix: For CQP, *Pts* column wasn't properly centered under the heading. *Stn* column also off by 1. Fixed. (TNX N6TV)
| |
| − | - Bug fix: DB file loader didn't ignore comments. Fixed. (TNX N6TV)
| |
| − | - Bug fix: Repeating CQ delay timer settings wasn't saved in config. Fixed. (TNX N6TV)
| |
| − | - Time ON/OFF calculation fixed to match ARRL Sweepstakes / NAQP rules. (TNX N6TV)
| |
| − | - Bug fix: Cursor width wasn't recalculated when log font was changed. Fixed. (TNX N6TV)
| |
| − | - New contest supported: Ten-Meter RTTY Contest. (TNX YT3W)
| |
| − | - New contest supported: TARA RTTY Melee Contest. (TNX YT3W)
| |
| − | - New contest supported: NRRL Field Day. (TNX YT3W)
| |
| − | - New contest supported: Arktika Cup. (TNX YT3W)
| |
| − | - New option available: Options->Automatic backup. If automatic backup is enabled, it will create copy of log file at chosen location
| |
| − | every XX minutes. Period is chosen by user. Also, LGS formatted file can be created on same location during backup process.
| |
| − | Automatic backup is run in background thread, so it doesn't stop main thread from usual work. LGS file created during automatic backup
| |
| − | process is also created in same background thread.
| |
| − | - New option available: File->Export->Log search format. Export currently opened log in LGS formatted file.
| |
| − | - WAG Contest outside DL: Worked German districts window wasn't enabled. Fixed. (TNX EA5FQ)
| |
| − | - New contest supported: Makrothen Contest. (TNX YT3W)
| |
| − | - OK/OM Contest prefill database added. (TNX EA5FQ)
| |
| − | - HamCAP integration implemented: CTRL+P now launch HamCAP application for callsign typed in callsign field. (TNX N6TV)
| |
| − |
| |
| − | Ver 2.0.17
| |
| − | ------------------------
| |
| − | - If you hold down Control key during application start, it will be possible to override some settings remembered in
| |
| − | application config file when application was started previous time (size, opening last log automatically etc).
| |
| − | - "~" sign can be used in messages to concatenate multiple macro (or macro and text) in one word (without spacing between
| |
| − | commands or commands and some text)
| |
| − | - New option added: Options->CW->Add spacing when stacking messages.
| |
| − | If checked, when you stack couple of messages during CW keying, DXLog.net will insert space character between each message
| |
| − | automatically. Default is unchecked.
| |
| − | - Other standard and additional messages now can be called as macro in additional messages when keying from ALT+C screen.
| |
| − | - If WinKeyer was enabled on port, but serial port didn't exists, exception was raised. Fixed. (TNX YT3W)
| |
| − | - New option available: File->Clean log.
| |
| − | You can clean log file from qsos with yourself, Dupe qsos or remove /QRP extensions from qso.
| |
| − | - Fixed MMVARI, MMTTY and 2Tone modes now. It should work OK for FSK and AFSK modes. (TNX W4TV).
| |
| − | - MMTTY and/or 2Tone external process was started without setting working directory which caused a problem with
| |
| − | .ini file config saving in SO2R operating mode. Fixed. (TNX N6TV)
| |
| − | - New option added: File->Export->Text file.
| |
| − | Log file can be exported in simple txt tab delimited file which can be used for further analysis.
| |
| − | - FT-1000D supported added. (TNX EI3JE)
| |
| − | - RTTY FSK mode is now supported in MMVARI decoder.
| |
| − | - New contest supported: RSGB UKAC 6/4/2m & 70/23cms. (TNX 2E0SQL).
| |
| − | - New options added in status window. You can show/hide some columns, as well as change sorting method. (TNX NQ4I)
| |
| − | - New transceiver supported: TenTec Orion. (TNX NQ4I)
| |
| − | - All bands/periods state is now remembered in each of the Worked multipliers windows. (TNX N6TV)
| |
| − | - Radio Ant/Status window now shows also more interlock information. You can see which station is blocking you and
| |
| − | what message is sent on that station. In case it is manual tx request (for example footswitch requested), msg is
| |
| − | shown as MAN (manual). Also, if tx and interlock blocking is requested by CW/RTTY keyboard, msg will be shown as
| |
| − | KEYB.
| |
| − | - Bugfix: TX/RX switching was broken when using DSR COM port switch for PTT (footswitch). Fixed now.
| |
| − | - Number server / local number synchronization is fixed now. Successfull number reservation is now also shown in status
| |
| − | bar in main form.
| |
| − | - If log is opened and File->New was clicked, active log was closed after config screen was filled. On slower computers
| |
| − | closing procedure wasn't handled properly and opening of new log was broken. This was changed on the way that user is
| |
| − | warned that log is prompted to close active log before continuing with new log creation procedure. (TNX 9A7R)
| |
| − | - New bandmap option added: Show network stations.
| |
| − | If checked, network stations position will be visible in bandmap. Station ID is also shown.
| |
| − | - ICOM CI-V protocol changed to support radio polling.
| |
| − |
| |
| − | Ver 2.0.16
| |
| − | ------------------------
| |
| − | - Additional space character between letters was added when using CW/RTTY keyboard (ALT+K). Fixed now. (TNX G4BYG, XE2K)
| |
| − | - Regex checking for valid callsign/rcvd entry was added when callsign/rcvd was selected by clicking in digi mode
| |
| − | decoder RX window.
| |
| − | - Improved callsign regex validation in digi mode decoder rx windows.
| |
| − | - If worked callsign is same as callsign entered in contest config screen, QSO is automatically marked as invalid.
| |
| − | It will be possible to delete such qsos later with clean log option from menu.
| |
| − | - SCP search can be started after 2nd character in callsign. Default is after 3rd character. See Check partials form,
| |
| − | drop down menu. (TNX N6TV)
| |
| − | - New CW/RTTY macro commands added:
| |
| − | $QSOB4WIPE - if qso is dupe, sends QSOB4 message and clear current qso row
| |
| − | $CLEARRIT - clear RIT on currently active radio (works on radio which supports this command). (TNX N6TV, DF9DD)
| |
| − | - New option added: Options->CW->Speed limits. You can set minimum or maximum CW speed. Default min = 20, max = 60 wpm. (TNX RZ3AZ)
| |
| − | - CQ WW RTTY default message fixed for US stations (added $EXCHANGE macro). (TNX W9PA)
| |
| − |
| |
| − |
| |
| − | Ver 2.0.15
| |
| − | ------------------------
| |
| − | - Network time synchronization was running when Number server was enabled. Fixed to run only
| |
| − | when Time synch server is running. (TNX R9IR)
| |
| − | - Network GAB messages were shown on all network PC's, without checking destination.
| |
| − | Now fixed and GAB messages is shown on all PC's only if message destination is "ALL" or when client
| |
| − | responding to DXCluster talk message. In other cases, GAB message will be shown only on PC which
| |
| − | station ID is same as message destination address. (TNX 9A3ZA)
| |
| − | - Network GAB messages are now saved by default to history file and loaded when log is opened.
| |
| − | User can switch this off by unchecking "Save to history file" pop-up menu option in GAB window (ALT+I)
| |
| − | - DXC Cluster stream and DXC Spots are now saved to history files. This can be switched off in
| |
| − | DXC Announcements window (ALT+A) and DXC Cluster window (ALT+O).
| |
| − | - CW Keyer stop message was delayed until next CW element was sent. Fixed. (TNX RZ3AZ, N6TV, OE1EMS, YU7RL)
| |
| − | - When using DIGI modes, if macro message contains $LOGGEDCALL macro command and current logged qso callsign is
| |
| − | empty, DXLog.net automatically grabs last known (highlighted) callsign from TX/RX window. (TNX 2E0SQL)
| |
| − | - MMVARI window was opened in BPSK mode by default, even if contest was RTTY only. Now changed so that during window
| |
| − | initialization new mode is set to currently active mode for radio. (TNX 2E0SQL)
| |
| − | - When using keyboard and longer text (for example from macro) was sent, if user closed keyboard window by clicking on
| |
| − | X in right upper corner, TX was iddling after message was sent. Now changed on the way that TX is stopped immediately
| |
| − | if keyboard window is closed (by clicking X, or button). (TNX 2E0SQL)
| |
| − | - New shortcut introduced: CTRL+PLUS now silently save QSO when ESM mode is enabled.
| |
| − | - MMTTY RTTY decoder is now supported.
| |
| − | - 2Tone RTTY decoder is now supported.
| |
| − | - New options available: Secondary decoder for Radio 1 and Radio 2.
| |
| − | - Options->RTTY configuration menu is now available.
| |
| − | User can choose primary/secondary decoder type for each radio. Default is MMVARI.
| |
| − | MMTTY / 2Tone decoders should be installed before usage.
| |
| − | - Fixed OmniRig frequency "rounding" problem.
| |
| − | - CW word spacing is now corrected to right values.
| |
| − | - Options->Log menu is now shown also as context popup-menu after mouse right click in the log. (TNX N6TV)
| |
| − | - When Alt key only was pressed, top menu was accessed. Now fixed. (TNX N6TV)
| |
| − | - Additional CW/RTTY messages can be transmitted from editor window (ALT+C). (TNX N6TV)
| |
| − | - Installer now remembers installation directory from previous versiona and in case of upgrade,
| |
| − | it will propose same installation directory. (TNX N6TV)
| |
| − | - New contest supported: CNCW (EA local contest).
| |
| − | - Live score mode fixed for CQ WW RTTY contest.
| |
| − |
| |
| − | Ver 2.0.14
| |
| − | ------------------------
| |
| − | - Live score post now option was active only when Enabled auto posting was checked. Fixed.
| |
| − | - Fixed problem with Thread polling in WinXP systems when CW keying is running.
| |
| − |
| |
| − | Ver 2.0.13
| |
| − | ------------------------
| |
| − | - Fixed MMVARI baud rate was reset to default whan changing sound card selection.
| |
| − | - Fixed "File in use" error when downloading CTY_WT_MOD.dat update. (TNX W9PA)
| |
| − | - CQP: changed dupe calculation from band/mode to band/mode/county. (TNX N6TV)
| |
| − | - New option added: Tools->Data entry->Exchange guessing.
| |
| − | User can select between 3 options:
| |
| − | - Pressing the space bar
| |
| − | - Automatically
| |
| − | - After timeout
| |
| − | - CQ WW scoring for NA<->NA stations was wrong. Fixed. (TNX NQ4I)
| |
| − | - DX Spots in network didn't propagate to clients monitoring window (ALT+O). (TNX NQ4I)
| |
| − | - Spot station (ALT+F3) and Talk to DXC (ALT+T) are now enabled when network is enabled.
| |
| − | - CTRL+TAB was switching RUN/SP mode always on radio 1, and CTRL+SHIFT+TAB on radio 2.
| |
| − | It's changed to:
| |
| − | CTRL+TAB switch RUN/SP mode on primary (active radio)
| |
| − | CTRL+SHIFT+TAB switch RUN/SP mode on secondary (inactive radio) (TNX N6TV)
| |
| − | - Dupe info wasn't refreshed in SCP windows when double qso check mode was based on received info field. (TNX N6TV)
| |
| − | - DXCluster talk messages are now shown in GAB window.
| |
| − | Talk messages can be responded in GAB window by selecting destination callsign for GAB message.
| |
| − | - New contest supported: Polar radioman contest. (TNX 9A1AA)
| |
| − | - New contest supported: Georgia QSO party.
| |
| − | - New contest supported: Florida QSO party.
| |
| − |
| |
| − |
| |
| − | Ver 2.0.12
| |
| − | ------------------------
| |
| − | - microHam internal DVK keyer is supported now.
| |
| − | - SSB bargraph added. Active during recording / playing DVK messages on sound board.
| |
| − | - Tooltips with additional informations are added on Bandmap windows. (TNX OE1EMS/E77DX)
| |
| − | - Fixed DXCAnnouncements window double click problem. (TNX DH2WQ)
| |
| − | - DUPE text is now shown in mult column if worked QSO is DUPE. (TNX N6TV, R9IR)
| |
| − | - Double click on callsign at Check partials and N+1 window now grab callsign into actual QSO entry window.
| |
| − | - New contest supported: DRCG World Wide RTTY. (TNX DM5TI)
| |
| − | - ICOM 746 radio was ICOM 746 PRO. Renamed. (TNX SV1DOO)
| |
| − | - New radio support added: ICOM 746.
| |
| − | - CW timing issues. Added internal compensation factor. Should be more precise now.
| |
| − | - Network ping message introduced. If response is not received in 30 seconds, network is restarted on client.
| |
| − | - Sending spots (ALT+F3) was disabled when connected to other dx cluster. Fixed now. (TNX R9IR)
| |
| − | - Adding QSO notes (ALT+N) command is now available.
| |
| − | - BARTG SPRINT and BARTG SPRINT75 splitted in two config files.
| |
| − | - BARTG SPRINT and BARTG SPRINT75 config corrected according to the rules.
| |
| − | - New contest supported: TRC-DX Contest. (TNX F5IN)
| |
| − | - New option added: Options->Interface specific configuration->Use MMVARI center frequency correction
| |
| − | Default is checked.
| |
| − | If checked DXLog.net will calculate actual frequency as frequency from radio +/- MMVARI carrier center frequency.
| |
| − | This corrected frequency will be used as actual bandmap frequency, dxspotting frequency and stored as frequency
| |
| − | where qso was made.
| |
| − | - MMVARI new options added: Sound card RX, Sound card TX.
| |
| − | Allows user to choose which sound card will be used for RX and TX in each of the MMVARI Radio windows.
| |
| − | Default value is windows default sound card setting.
| |
| − | - New contest supported: Wednesday mini contest. (TNX RZ3AZ)
| |
| − |
| |
| − |
| |
| − | Ver 2.0.11
| |
| − | ------------------------
| |
| − | - Double click on Check callsign or Check multipliers data now immediately scrolls log to clicked qso.
| |
| − | - Tools->Repeat loop option was broken (txt command was OK). Fixed now. (TNX DK5TX)
| |
| − | - Redefine keys wasn't working properly when destination key included Shift modifier. Fixed now. (TNX DK5TX)
| |
| − | - OmniRig is now supported.
| |
| − | - ADIF import is redesigned and optimized for faster import.
| |
| − | - The hyphen or minus key (-) quickly activates/deactivates Split mode.
| |
| − | - Command line arguments "-n" or "--noautoload" can be specifed to override Load contest at startup option.
| |
| − | - WAEDC contest - DX side QTC sending is now enabled.
| |
| − | - WAEDC contest - added info messages for number of QTCs available/received/sent/in stock etc.
| |
| − | - Floating windows option was broken. Now fixed. (TNX DF1LX)
| |
| − | - Check multipliers window data was display only for MULT1 field. Now it uses first field in sequence MULT1, MULT2, MULT3
| |
| − | which isn't empty. (TNX DK5TX)
| |
| − | - QTC network messages added. QTC synchronization is on and data is synchronized between stations in network.
| |
| − | - Options->Log->Fonts->Large wasn't properly restored after log opening. Fixed. (TNX G4BYG)
| |
| − |
| |
| − | Ver 2.0.10
| |
| − | ------------------------
| |
| − | - Version numbering is changed as of version 2.0
| |
| − | - Footswitch PTT function on serial port (DSR pin) is now available.
| |
| − | - Software interlock is available now.
| |
| − | - Number server is implemented.
| |
| − | - Multi op band / mode change counters are available and can be defined by category in config files.
| |
| − | - SO2R is now supported.
| |
| − | - Fixed CW keying problem with COM port 10 and above.
| |
| − | - UBA Contest rules changed for year 2014.
| |
| − | - SCWC config fixed because of problems with special letters in category names when using Win8 OS. (TNX YT3W)
| |
| − | - Tesla memorijal local YU V/U/SHF contest is now supported. (TNX YT3W)
| |
| − | - New option added: Redefine keyboard keys (Text command: DEFINEKEYS).
| |
| − | - New text commands added: SETUP (configure interfaces) and WRITELOG (Export cabrillo file)
| |
| − | - GTC CW Cup Config changed: new rules for 2013.
| |
| − | - Serial port communication is now fully moved to low level API access.
| |
| − | - New contest supported: OK1WC Memorial HF Contest. (TNX YT3W)
| |
| − | - New SO2R boxes supported: Microham MK2R/MK2R+/u2r. (TNX Jozef OM7ZZ from Microham).
| |
| − | - Standard cw messages editor available.
| |
| − | - Search and Pounce mode implemented.
| |
| − | - User can select between Run/S&P mode with Ctrl+Tab (Radio1) or Ctrl+Shift+Tab (Radio2).
| |
| − | - Additional cw messages available (editor + msg 1..12 with macros $MSG1..$MSG12).
| |
| − | - Added search and pounce messages set (available in editor and SHIFT + key editor)
| |
| − | - Sprint exchange logic implemented. (TNX N6TV).
| |
| − | - CW Shortened spaces implemented. Can be enabled or disabled.
| |
| − | - Country files can be selected between CTY.DAT, CTY_WT.DAT and CTY_WT_MOD.dat.
| |
| − | - SO2R Scenarios editor implemented.
| |
| − | - SO2R Scenarios can be used in Advanced SO2R mode.
| |
| − | - Active scenario can be selected on menu or shortcuts (Ctrl+Alt+1..8)
| |
| − | - Active radio, Headphones and Stereo RX mode control is now possible on serial ports.
| |
| − | - Zoom level on bandmap is saved in and restored from configuration file.
| |
| − | - If $CR macro exists in CW message when esc is pressed, $CR macro is executed anyway.
| |
| − | - New option available: Options->DX Cluster->Reconnect default DXCluster at start.
| |
| − | - BUG fix: Keyboard mode was sending spaces between each character.
| |
| − | - The "<" and ">" keys now works as field navigation.
| |
| − | - OK button is now default one on SETUP screen.
| |
| − | - New text commands: REOPEN/RELOAD and REOPENNOW/RELOADNOW - reopens current log
| |
| − | - CTRL+K, CTRL+A and CTRL+E key combinations now works on entry fields.
| |
| − | - CW speed is saved in and restored from configuration file.
| |
| − | - CW leading zero and abbreviation settings are saved in and restored from configuration file.
| |
| − | - Hide QSO numbers setting is now saved in and restored from configuration file.
| |
| − | - All fields except callsign field are in overwrite mode now.
| |
| − | - New text commands: VER/VERSION - shows about screen.
| |
| − | - Ctrl+Up, Ctrl+Shift+Up, Ctrl+Down, Ctrl+Shift+Down now navigate through bandmap.
| |
| − | - When in repeating mode, pressing F1 while CQ is running, stops current CQ, and restarts new one
| |
| − | from the start.
| |
| − | - Changed max length RecInfo field for CW Open contest to 12 characters (contest txt config file changed).
| |
| − | - Cursor position in field is now remembered and restored while scrolling through log with up/down arrows.
| |
| − | - Message keys F1..F7, INS and PLUS are accesible in keyboard window.
| |
| − | - Esc key now closing keyboard window if TX isn't active.
| |
| − | - BUG fix: there was a bug in procedure for processing cat data from Kenwood, Elecraft and some Yaesu type of radio.
| |
| − | The exception was not properly handled and serial port communication was immediately closed.
| |
| − | - DXCluster Announcements window display options are now saved in and restored from configuration file.
| |
| − | - Recent opened files list is available in File menu. Last 4 opened logs are remembered.
| |
| − | - New option added: Options->Load contest at startup->Enabled/Disabled.
| |
| − | If enabled, most recent log file is automatically opened after application start. Default is disabled.
| |
| − | - Microphone muting functions while using Sound card as DVK implemented.
| |
| − | Works on older Windows (XP, 2000) and newer versions (Vista, Win7 etc).
| |
| − | - New option added: GOTO Qso (Shortcut CTRL + G). Jumps to desired QSO number in the log.
| |
| − | - New option added: Options->CW->Remap keys in keyboard mode.
| |
| − | If checked, KEY remapping works when CW keyboard is active. Default is unchecked.
| |
| − | - New option added: Options->CW->Work dupes (Text commands: WORKDUPE/WORKDUPEON, NOWORKDUPE/WORKDUPEOFF).
| |
| − | If work dupes is checked/activated, $QSOB4 macro doesn't send QSOB4 message if QSO is dupe.
| |
| − | - NumLock key is now ignored as key for redefinition.
| |
| − | - New option added: Commands->Operator login (Text commands: OPON/LOGIN, OPOFF/LOGOFF).
| |
| − | If operator is logged on, callsign is associated with any new qso logged.
| |
| − | Also, operator callsign is used for different voice memories (subdirectory is equal to logged on callsign).
| |
| − | - New option added: Options->Interface specific options->Allow different TX/RX antenna.
| |
| − | If checked, TX and RX antenna can be different (selected with ALT + F11 / F12 keys).
| |
| − | TX/RX antenna is automatically switched before PTT ON and after PTT OFF.
| |
| − | Default is unchecked.
| |
| − | - New option available in config interfaces screen: PTT Tail Delay (ms).
| |
| − | - Network protocol is changed. DXLog.net V2.0 will run on new network protocol.
| |
| − | - New option added: Tools->Data entry->Enable ESM mode (Text commands: ESM/ESMON, NOESM/ESMOFF).
| |
| − | If checked, ESM (enter sends message) is enabled. Default is unchecked.
| |
| − | - New contest supported: RCC Fieldday.
| |
| − | - Bug fix: when CAT interface was active on two radios, polling function was sharing same address space. Now it is
| |
| − | changed to run in different address spaces. (TNX N6TV)
| |
| − | - New option added: Options->Log->Stay in field while moving up and down in the log. Default is checked.
| |
| − | - Bandmap function: Alt->Doubleclick - put frequency in opposite vfo.
| |
| − | - Bandmap function: Ctrl->Doubleclick - quickly delete desired callsign from bandmap.
| |
| − | - New text field editing shortcuts implemented: Ctrl+B, Ctrl+D, Ctrl+F, Ctrl+W, Ctrl+K.
| |
| − | - DXCluster monitor window (ALT+O) now shows connection name and status in titlebar.
| |
| − | - Multi-threading functions are recorded for better internal synchronization and more stability.
| |
| − | - New contests supported: NA Sprint, NCCC Sprint.
| |
| − | - New text commands available: AUTORELOAD / NOAUTORELOAD (same function as Options->Load contest at startup->Enabled/Disabled)
| |
| − | - New text commands available: CLEARLOG / CLEARLOGNOW (delete all qsos from active log file)
| |
| − | - New text commands available: COPYLOG / COPYLOGCLEAR (copy active log file to new log file with timestamp added to name)
| |
| − | In case of COPYLOGCLEAR command, log is copied as empty, without any qso in it.
| |
| − | - New option added: Edit->Delete all qso (same as CLEARLOG text command).
| |
| − | - Export Cabrillo file now has default name same as active log file, with different extension (.log).
| |
| − | User can change it in dialog available before saving.
| |
| − | - New text command available: BYE (same as EXIT / QUIT)
| |
| − | - New text command available: NEW (same as File->New)
| |
| − | - New text command available: OPEN (same as File->Open)
| |
| − | - New text commands available: NET/NONET & NETON/NETOFF (enable/disable DXLog.net network communications).
| |
| − | - New text commands available: NETCONFIG (same as Options->Configure network).
| |
| − | - New text commands available: ILOCK/NOILOCK & ILOCKON/ILOCKOFF (enable/disable DXLog.net sw interlock).
| |
| − | - New text commands available: CTYFILES/COUNTRYFILES (same as Options->Data files->Country files).
| |
| − | - ICOM 746 added to the list of supported radios.
| |
| − | - New callsign database for Serbian HF Cup (YU Local contest) is included in new release. (TNX 9A1AA)
| |
| − | - Cabrillo import is now fixed when fields are optional or different and depending on DEST parameters.
| |
| − | For example. (NA Sprint, NCCC Sprint etc).
| |
| − |
| |
| − | Ver 1.1.17 (20-Jun-2013)
| |
| − | ------------------------
| |
| − | - Live score posting to cqcontest.net is implemented now. (TNX RW4WM)
| |
| − | - Time ON/OFF counters implemented in rate window.
| |
| − | - Time ON/OFF information is added to summary text info (copy as text).
| |
| − | - Status info window is available now (shortcut ALT+J).
| |
| − | - Network messages for status info window are implemented.
| |
| − | - Multi/Single ten minute rule counters are available now (visible in status info window).
| |
| − | - Station type can be selected at Commands->Station type menu.
| |
| − | - LPT port keying was broken in previous version. Fixed now. (TNX 9A1AA)
| |
| − | - New menu actions are available to switch antenna from software, if multiple antennas are available
| |
| − | for same band (Commands->Antenna selection ->Change TX / Change RX). Shortcuts ALT+F11 / ALT+F12.
| |
| − | - Currently selected RX/TX antenna is visible in status bar. This will be moved to new window in software.
| |
| − | - When using LPT port band data for antenna switching, currently there isn't possible to set different antena for TX/RX.
| |
| − | This feature will be implemented too, but need more testing because of possible relay hot switching problems.
| |
| − | - Some contest config files are changed where live score contest name is not same as contest name for Cabrillo file.
| |
| − | - WAG contest: default CW messages for DL stations now points to $EXCHANGE variable, and for non-DL stations to $SERIAL.
| |
| − |
| |
| − |
| |
| − | Ver 1.1.16 (12-Jun-2013)
| |
| − | ------------------------
| |
| − | - Cabrillo format for Portugal day contest is now fixed. (TNX 9A1AA)
| |
| − | - Fixed Cabrillo entry for TB-WIRES category in CQ WPX Contest. (TNX 9A6C)
| |
| − | - New contest supported: Ukrainian DX DIGI Contest.
| |
| − | - New contest supported: Ukrainian DX Classic RTTY Contest.
| |
| − | - CAT protocol was broken on FT-897D. Now it is OK. (TNX 9A6SJZ)
| |
| − | - VFO A/B selection now should work on Kenwood radio too.
| |
| − | - Bandmap list vertical scroll doesn't reset on top position anymore when new spot is received.
| |
| − | - New bandmap display options added (hide dupes and invalids + show multipliers only).
| |
| − | - Clear bandmap command working now.
| |
| − | - UR oblasts database is now included in distribution. (TNX YT3W)
| |
| − | - EZMaster antenna matrix support is implemented.
| |
| − | - LPT port configuration screen changed to provide band data info on LPT port pins, DVK control etc.
| |
| − | - LPT bcd band data is implemented now. Defaults to Top-Ten Devices now, but there will be new config screen to configure pins if needed.
| |
| − |
| |
| − | Ver 1.1.15 (08-Jun-2013)
| |
| − | ------------------------
| |
| − | - QSO frequency can be edited now in ALT+F screen. (TNX E70T)
| |
| − | - New contest supported: RCC Cup. (TNX YT3W)
| |
| − | - New contest supported: Aegean RTTY Contest. (TNX YT3W)
| |
| − | - New contest supported: DL-DX RTTY. (TNX YT3W)
| |
| − | - New contest supported: DMC RTTY Contest. (TNX YT3W)
| |
| − | - New contest supported: Russian «RADIO» RTTY WW Contest. (TNX YT3W)
| |
| − | - New contest supported: Sainio CW Contest. (TNX YT3W)
| |
| − | - New contest supported: Sainio RTTY Contest. (TNX YT3W)
| |
| − | - New contest supported: Sainio SSB Contest. (TNX YT3W)
| |
| − | - New contest supported: UA2 QSO Party. (TNX YT3W)
| |
| − | - Bug fix: Helvetia contest definition double qso was calculated per band/mode, fixed to per band only. (TNX 9A1AA)
| |
| − | - Bug fix: Cabrillo/ADIF export was broken when RST field was shorter than expected. (TNX 9A9A)
| |
| − | - New radio supported: Yaesu FT-450.
| |
| − | - Bandmap active VFO now tracks active vfo on radio.
| |
| − | - Switching bandmap active vfo now sends cat command to radio to switch vfo.
| |
| − | - New contest supported: Ukrainian Radio Sport Team Championship. (TNX YT3W)
| |
| − |
| |
| − | Ver 1.1.14 (23-Apr-2013)
| |
| − | ------------------------
| |
| − | - Bug fix: worked prefix display window was broken when callsign with multiple number was logged.
| |
| − | - New macro command available: $SPACE
| |
| − | - Worked multipliers list window was broken when QSO with unrecognized DXCC was logged. (TNX OK1RI)
| |
| − | - Fixed some threading problems in check partials methods.
| |
| − | - Added 24 GHz band for EU V/U/SHF contests. (TNX 9A4QV)
| |
| − | - Fixed 50 MHz QSOs ADIF import problem when using DXPedition mode. (TNX J28AA/E70A)
| |
| − | - WWL locator database is now included for EU V/U/SHF contests.
| |
| − | - SCP search by recinfo value from database is now available.
| |
| − |
| |
| − | Ver 1.1.13 (05-Apr-2013)
| |
| − | ------------------------
| |
| − | - SPDX database included. (TNX SP5KP)
| |
| − | - Bug fix: postcontest mode qso scrolling was broken when trying to scroll from UTC time field.
| |
| − |
| |
| − | Ver 1.1.12 (29-Mar-2013)
| |
| − | ------------------------
| |
| − | - Fixed Veteran (YUOTC) contest.
| |
| − |
| |
| − | Ver 1.1.11 (18-Mar-2013)
| |
| − | ------------------------
| |
| − | - New contest supported: Bucharesti HF International Contest.
| |
| − | - Bug fix: Cabrillo export for CQ WPX Contest.
| |
| − | - New contest supported: SARTG WW RTTY Contest. (TNX YT3W)
| |
| − | - New contest supported: SARTG New Year RTTY Contest. (TNX YT3W)
| |
| − |
| |
| − | Ver 1.1.10 (15-Mar-2013)
| |
| − | ------------------------
| |
| − | - New contest supported: Russian Radio Team Championship. (TNX YT3W)
| |
| − | - New contest supported: Volga Federal District Radio Team Championatship. (TNX YT3W)
| |
| − | - New contest supported: RAC Canada Day Contest. (TNX YT3W)
| |
| − | - New contest supported: RAC Canada Winter Contest. (TNX YT3W)
| |
| − | - Bugfix: SCWC Contest. (TNX YT3W)
| |
| − |
| |
| − | Ver 1.1.9 (14-Mar-2013)
| |
| − | ------------------------
| |
| − | - New contest supported: RSGB CW National Field Day. (TNX YT3W)
| |
| − | - New contest supported: RSGB RoPoCo Contest. (TNX YT3W)
| |
| − | - New contest supported: RSGB First 1.8MHz Contest. (TNX YT3W)
| |
| − | - New contest supported: RSGB Second 1.8MHz Contest. (TNX YT3W)
| |
| − | - New contest supported: PODXS Ø7Ø Club PSKFest. (TNX YT3W)
| |
| − | - New contest supported: PGA Test. (TNX YT3W)
| |
| − | - New contest supported: PGA-DIGI. (TNX YT3W)
| |
| − | - New contest supported: Polska WW BPSK63 Contest. (TNX YT3W)
| |
| − | - New contest supported: Yuri Gagarin International DX Contest. (TNX YT3W)
| |
| − | - New contest supported: PODXS 31 Flavors Contest. (TNX YT3W)
| |
| − | - New contest supported: PODXS 40 Meter Firecracker Sprint. (TNX YT3W)
| |
| − | - New contest supported: PODXS 80 Meter Jay Hudak Memorial Sprint. (TNX YT3W)
| |
| − | - New contest supported: PODXS 160 Meter Great Pumpkin Sprint. (TNX YT3W)
| |
| − | - New contest supported: PODXS Valentine Sprint. (TNX YT3W)
| |
| − | - New contest supported: Goes hunting for wolves. (TNX YT3W)
| |
| − | - New contest supported: RSGB Affiliated Societies Contests. (TNX YT3W)
| |
| − | - New contest supported: RSGB Low Power Contest. (TNX YT3W)
| |
| − | - New contest supported: RSGB SSB Field Day. (TNX YT3W)
| |
| − | - New contest supported: RSGB 80m Sprint Contest. (TNX YT3W)
| |
| − | - New contest supported: RSGB Club Calls Contest (1.8MHz AFS). (TNX YT3W)
| |
| − | - New contest supported: Open Ukraine RTTY Championship. (TNX YT3W)
| |
| − | - New contest supported: Ural Cup. (TNX YT3W)
| |
| − | - YAESU FT-897 CAT communication supported.
| |
| − |
| |
| − | Ver 1.1.8 (19-Feb-2013)
| |
| − | ------------------------
| |
| − | - New contest supported: EPC Ukraine DX Contest. (TNX YT3W)
| |
| − | - New contest supported: UK DX BPSK63 Contest. (TNX YT3W)
| |
| − | - New contest supported: CIS DX PSK Contest. (TNX YT3W)
| |
| − | - New contest supported: IOTA Contest. (TNX YT3W)
| |
| − | - ICOM IC-7410 CAT communication supported.
| |
| − |
| |
| − | Ver 1.1.7 (15-Feb-2013)
| |
| − | ------------------------
| |
| − | - New contest supported: British Columbia QSO Party (BCQP). (TNX YT3W)
| |
| − | - New contest supported: AGCW YL-CW Party. (TNX YT3W)
| |
| − | - New contest supported: KCJ TOPBAND Contest. (TNX YT3W)
| |
| − | - New contest supported: KCJ Contest. (TNX YT3W)
| |
| − | - New contest supported: Asia Pacific Sprint Contest.
| |
| − | - New contest supported: RSGB 80m Club Championship. (TNX YT3W)
| |
| − | - New contest supported: Holyland Contest. (TNX YT3W)
| |
| − | - New contest supported: Russian WW PSK Contest. (TNX YT3W)
| |
| − | - New contest supported: EPC Russia DX Contest. (TNX YT3W)
| |
| − | - New contest supported: EU PSK DX Contest. (TNX YT3W)
| |
| − | - New contest supported: Sumadija PSK. (TNX YT3W)
| |
| − | - Fixed HQ stations calculation in BSCI contest. (TNX 9A1AA)
| |
| − |
| |
| − | Ver 1.1.6 (01-Feb-2013)
| |
| − | ------------------------
| |
| − | - New contest supported: CQ-WE (Western Electric) Contest. (TNX YT3W)
| |
| − | - Multiple custom multiplier lists windows are available now.
| |
| − | - Fixed CW keyer problem when cw message is defined as single macro.
| |
| − |
| |
| − | Ver 1.1.5 (30-Jan-2013)
| |
| − | ------------------------
| |
| − | - New contest supported: Triathlon DX contest. (TNX YT3W)
| |
| − | - New contest supported: International NAVAL Contest. (TNX YT3W)
| |
| − | - New contest supported: NAQP - North American QSO Party. (TNX YT3W)
| |
| − | - New contest supported: YO International PSK31 Contest. (TNX YT3W)
| |
| − | - New contest supported: ARRL Sweepstakes. (TNX YT3W).
| |
| − | - New contest supported: Black Sea Cup International (BSCI).
| |
| − | - DXCluster connection code is now redesigned for more stability.
| |
| − | - Serial port keying now working with access to serial port on WIN API level,
| |
| − | because of more accurate keying, problems with some USB->RS232 serial converters etc.
| |
| − |
| |
| − | Ver 1.1.4 (17-Jan-2013)
| |
| − | ------------------------
| |
| − | - New contest supported: DTC - German Telegraphy Contest. (TNX YT3W)
| |
| − | - New contest supported: Marconi Memorial HF. (TNX YT3W)
| |
| − | - New contest supported: EUCW Fraternizing CW QSO Party. (TNX YT3W)
| |
| − | - New contest supported: BARTG RTTY SPRINT & SPRINT 75 Contest. (TNX YT3W)
| |
| − | - New contest supported: BARTG RTTY SPRINT 75 Contest. (TNX YT3W)
| |
| − | - New contest supported: BARTG HF RTTY Contest. (TNX YT3W)
| |
| − | - New contest supported: Baltic contest. (TNX YT3W)
| |
| − | - New contest supported: PACC. (TNX YT3W)
| |
| − | - New contest supported: EA PSK63 Contest. (TNX YT3W)
| |
| − | - New contest supported: EA RTTY Contest. (TNX YT3W)
| |
| − | - New contest supported: Russian DX contest. (TNX YT3W)
| |
| − | - DARC 10m fixed invalid multiplier error.
| |
| − | - DOK database is now in valid format.
| |
| − | - MMVARI RX window now recognizes callsigns, multipliers, dupes etc.
| |
| − | - Implemented TX/RX switching when using digital modes.
| |
| − | - More bug fixes regarding mode reading when using CAT and MMVARI.
| |
| − |
| |
| − | Ver 1.1.3 (10-Jan-2013)
| |
| − | ------------------------
| |
| − | - New contest supported: CQMM DX (CQ Manchester Mineira DX) Contest. (TNX YT3W)
| |
| − | - New contest supported: AGCWDL-QRP. (TNX YT3W)
| |
| − | - BUG fix: parsing of some custom fx was broken due wrong culture info.
| |
| − | - New config field available: Operator name (OPNAME).
| |
| − | - Digital modes with MMVARI (author JE3HHT - MM HAM SOFT) engine supported and included in distribution.
| |
| − | - New contest supported: EPC WW DX Contest. (TNX YT3W)
| |
| − | - YU KT Maraton new rules supported. (TNX YT3W)
| |
| − |
| |
| − | Ver 1.1.2 (07-Jan-2013)
| |
| − | ------------------------
| |
| − | - New contest supported: ARRL 10m Contest. (TNX YT3W)
| |
| − | - New contest supported: Japan International DX Contest. (TNX YT3W)
| |
| − | - New contest supported: SP DX Contest. (TNX YT3W)
| |
| − | - New contest supported: 9KCC 15m Contest. (TNX YT3W)
| |
| − | - New contest supported: Helvetia Contest.
| |
| − | - New contest supported: ES Open Contest.
| |
| − | - New contest supported: WW PMC Contest.
| |
| − | - New contest supported: OK DX RTTY Contest. (TNX YT3W)
| |
| − | - New contest supported: QRP-QRP Party (by AGCW-DL). (TNX YT3W)
| |
| − | - BUG fix: score summary display by mode was broken.
| |
| − | - BUG fix: custom multiplier list width was wrong when mult group was visible.
| |
| − |
| |
| − | Ver 1.1.1 (03-Jan-2013)
| |
| − | ------------------------
| |
| − | - New contest supported: DARC 10m Contest.
| |
| − | - New contest supported: LZ Open Contest.
| |
| − | - New contest supported: Hungarian DX Contest.
| |
| − | - New contest supported: CQ WW 160-Meter Contest.
| |
| − | - New contest supported: REF Contest.
| |
| − | - Changed extension for DXLog log files from .dxl to .dxn because of collision with DX4WIN software
| |
| − | (file open still allows to open old extension, but in new log creation there is only .dxn extension allowed)
| |
| − | - BUG fix: letters on clock window was overlapped when using bigger fonts. (TNX 9A6SJZ)
| |
| − |
| |
| − | Ver 1.1.0 (02-Jan-2013)
| |
| − | ------------------------
| |
| − | - Fixed some problems with ARRL DX contest definition.
| |
| − | - Added startup splash screen.
| |
| − | - New fonts are now embedded with application.
| |
| − | - Fixed problems with true type font errors during the exit from application.
| |
| − | - Networking: fixed some problems with socket exception errors.
| |
| − | - Networking: contest checking is now implemented when establishing connection.
| |
| − | - Networking: CW message synchronization can be initiated on network now.
| |
| − | - Networking: QSO logging can be disabled on some PC when in network. Instead of saving QSO, callsign is added to bandmap.
| |
| − | - New contest supported: EU CW 160m QSO party.
| |
| − |
| |
| − | Ver 1.0.52 (22-Dec-2012)
| |
| − | ------------------------
| |
| − | - New contest supported: AGB Party. (TNX YT3W)
| |
| − | - New contest supported: ARI DX. (TNX YT3W)
| |
| − | - New contest supported: ARRL DX. (TNX YT3W)
| |
| − | - New contest supported: CQ WPX RTTY. (TNX YT3W)
| |
| − | - New contest supported: HSC. (TNX YT3W)
| |
| − | - New contest supported: NRAU. (TNX YT3W)
| |
| − | - New contest supported: VU DX. (TNX YT3W)
| |
| − | - New contest supported: CQ-M. (TNX YT3W)
| |
| − | - New contest supported: UBA. (TNX YT3W)
| |
| − | - New contest supported: Stew Perry Top Band Distance Challenge.
| |
| − | - BUG fix: DXCC_DB_TYPE / DXCC_DB_FILENAME - wasn't read from config file, it was hardcoded to CTY + CTY.dat. (TNX YT3W)
| |
| − | - BUG fix: Russian 160m contest - R1AN* station points calculation. (TNX YT3W)
| |
| − | - Custom multiplier grouping is available now in config file.
| |
| − |
| |
| − |
| |
| − | Ver 1.0.51 (14-Dec-2012)
| |
| − | ------------------------
| |
| − | - Russian 160m contest - fixed R1AN calculation.
| |
| − | - New config function added: RGX_GUESS_DB. Now regex can be used for guessing exchange for not worked stations.
| |
| − | For example: database is now implemented for Russian oblasts.
| |
| − |
| |
| − | Ver 1.0.50 (14-Dec-2012)
| |
| − | ------------------------
| |
| − | - Added CQ repeat loop function. This can be activated in Options->CW->Repeat loop menu or
| |
| − | with text command RPT (deactivated with NORPT txt command or click in menu option).
| |
| − | Repeat loop active status is visible at bottom of Rate window.
| |
| − | - New contest supported: Russian 160m contest.
| |
| − |
| |
| − | Ver 1.0.49 (13-Dec-2012)
| |
| − | ------------------------
| |
| − | - WinKeyer initialization was broken in previous version. Now fixed. TNX 9A2HM.
| |
| − |
| |
| − | Ver 1.0.48 (13-Dec-2012)
| |
| − | ------------------------
| |
| − | - Fixed prefix multiplier list window display.
| |
| − | - Fixed Cabrillo contest name for TAC contest. (TNX YT3W)
| |
| − | - Added grouping for different contest type in contest selection combo.
| |
| − | - New contest supported: AGCW HNY. (TNX YT3W)
| |
| − | - New contest supported: 21 Decembar. (TNX YT3W)
| |
| − | - WinKeyer supported.
| |
| − |
| |
| − | Ver 1.0.47 (04-Dec-2012)
| |
| − | ------------------------
| |
| − | - Fixed some bug in CAT frequency reading when bandmap spot is clicked.
| |
| − | - CQ frequency is now marked on bandmap.
| |
| − | - ALT+F4 returns to CQ frequency.
| |
| − |
| |
| − | Ver 1.0.46 (02-Dec-2012)
| |
| − | ------------------------
| |
| − | - Fixed mult calculation by band for TAC contest. (TNX 9A1AA)
| |
| − | - Bandmap list is now scrollable.
| |
| − | - Bandmap is clickable now.
| |
| − |
| |
| − | Ver 1.0.45 (01-Dec-2012)
| |
| − | ------------------------
| |
| − | - New contest supported: TAC
| |
| − |
| |
| − | Ver 1.0.44 (03-Nov-2012)
| |
| − | ------------------------
| |
| − | - New contest supported: Ukrainian DX Contest (URDXC).
| |
| − |
| |
| − | Ver 1.0.43 (18-Oct-2012)
| |
| − | ------------------------
| |
| − | - New contest supported: Worked All Germany (WAG).
| |
| − | - New contest supported: OK/OM DX Contest.
| |
| − | - Cabrillo export fixed in case of wrong mode from CAT. TNX 9A6SJZ.
| |
| − | - Bandmap is now implemented (list + regular bandmap layout)
| |
| − | - Database file checking now working also for multiplier determination for
| |
| − | spots received from DX cluster.
| |
| − |
| |
| − | Ver 1.0.42 (02-Oct-2012)
| |
| − | ------------------------
| |
| − | - Default window/configuration settings are saved when log is closed. They are used for defaults
| |
| − | when new log is created.
| |
| − | - GTC contest definition is now fixed. TNX SV5DKL.
| |
| − | - Added GTC members database. TNX 9A1AA.
| |
| − |
| |
| − | Ver 1.0.41 (20-Aug-2012)
| |
| − | ------------------------
| |
| − | - Fixed DXC info display when points are based on distance (V/U/SHF contest).
| |
| − | - Fixed Cabrillo output for IARU HFC contest. TNX 9A2TE.
| |
| − | - Add support for VHF/UHF bands in new dxpedition mode. TNX 9A6NDD.
| |
| − |
| |
| − | Ver 1.0.40 (18-Jun-2012)
| |
| − | ------------------------
| |
| − | - Fixed some bugs in Cabrillo import process.
| |
| − | - GTC CUP rules changed, according to new rules. TNX SV5DKL.
| |
| − | - New contest supported: His Majesty The King of Spain.
| |
| − | - Fixed CAT initialization problem with FT-847. TNX DL5SWB.
| |
| − |
| |
| − | Ver 1.0.39 (08-Jun-2012)
| |
| − | ------------------------
| |
| − | - New contest supported: Portugal day contest.
| |
| − | - New contest supported: WWSA GACW.
| |
| − |
| |
| − | Ver 1.0.38 (08-Jun-2012)
| |
| − | ------------------------
| |
| − | - New contest supported: UNDXC.
| |
| − | - New contest supported: EURO 2012 QSO Party.
| |
| − | - New contest supported: EU FF Green QSO party.
| |
| − |
| |
| − |
| |
| − | Ver 1.0.34 (17-Nov-2011)
| |
| − | ------------------------
| |
| − | - New contest supported: LZ DX.
| |
| − | - New contest supported: Sumadija. TNX YT3W.
| |
| − |
| |
| − |
| |
| − | Ver 1.0.33 (30-Sep-2011)
| |
| − | ------------------------
| |
| − | - Fixed CW generating problems (now complete running on performance counters)
| |
| − | - MMTTY integrated with DXLog.net for RTTY contests (this is still in testing phase)
| |
| − | - New contest supported: CQ WW RTTY
| |
| − | - Bug fix: page up scrolling was broken when scroll starts from previous qso line
| |
| − | - It's possible to import QSO's from ADIF log file (when current log is opened)
| |
| − |
| |
| − | Ver 1.0.32 (21-Sep-2011)
| |
| − | ------------------------
| |
| − | - Fixed distance (QRB) calculation formula. TNX 9A2HM, 9A2MI & 9A6C.
| |
| − | - Fixed EDI export CW mode. TNX 9A6C, 9A2HI
| |
| − | - Network protocol v1.0 is included now.
| |
| − | - QSO rate statistics added.
| |
| − | - Moved to performance counters for CW timing calculations instead of multimedia timers
| |
| − | because of higher accuracy.
| |
| − | - New contest support: First Greek Telegraphy Club CW Cup.
| |
| − | - Bug fix: final score calculation for KTKS contest now works OK. TNX YT3W.
| |
| − | - Bug fix: bandmap / dxcluster now doesn't change active qso period.
| |
| − | - Period up/down shortcuts are changed to CTRL+F10/F11, because statistics window shortcut is CTRL+F9.
| |
| − |
| |
| − | Ver 1.0.31 (07-Sep-2011)
| |
| − | ------------------------
| |
| − | - INVALID QSO message fixed for VHF/UHF/SHF contest. TNX 9A9L.
| |
| − | - New contest support: California QSO party (CQP).
| |
| − | - New contest support: Oceania DX.
| |
| − | - New contest support: EU Sprint.
| |
| − | - New contest support: Scandinavian Activity Contest (SAC).
| |
| − | - Added N+1 check partials support.
| |
| − | - Added bandmap / dxc properties editing form.
| |
| − | - New config option to remove decimal points in avg point calculation.
| |
| − | - Added ODX data on rate window (for VHF/UHF/SHF contests). TNX 9A6C.
| |
| − | - Mode field can be visible in qso list form (enabled by default for VHF/UHF/SHF contests).
| |
| − |
| |
| − | Ver 1.0.30 (26-Aug-2011)
| |
| − | ------------------------
| |
| − | - $CORRECT CW macro now sends corrected call sign.
| |
| − | - Text color changes now work OK in rate window.
| |
| − | - Alt+F3 now sends DX spot to cluster.
| |
| − | - Added Copy to text option on Summary window context menu.
| |
| − | - Added Copy to text option on Worked DXCC window context menu.
| |
| − | - Added YU DX contest support. TNX YT3W.
| |
| − | - DXLog.net windows can be independent of main window. TNX YT3W & YU1LM.
| |
| − | - New contest support: IARU Region 1 Fieldday (DARC rules).
| |
| − | - DXC Announcements and bandmap windows now resize OK with bigger fonts. TNX 9A1AA.
| |
| − | - DXC Announcements modify/delete functions now works OK.
| |
| − | - Fixed points column width on log screen (last digit wasn't visible when QRB was 1000 km or more). TNX 9A6C.
| |
| − | - Frequency marker added and activated on bandmap window.
| |
| − |
| |
| − | ver 1.0.29 (15-Aug-2011)
| |
| − | ------------------------
| |
| − | - Fixed ADIF export bug. TNX 9A1AA.
| |
| − |
| |
| − | ver 1.0.28 (15-Aug-2011)
| |
| − | ------------------------
| |
| − | - New contests supported: RDA Contest, YO DX HF Contest, CW Ops - CWT, All Asian
| |
| − | - Improved CW sound monitor.
| |
| − | - New contest databases handling added into contest config files.
| |
| − | - Moved on WIX installation script instead of Install Shield LE.
| |
| − |
| |
| − | ver 1.0.27 (14-Aug-2011)
| |
| − | ------------------------
| |
| − | - Fixed problems with decimal signs in frequency from CAT. TNX 9A1AA.
| |
| − | - New radios supported: Yaesu FT-847, Yaesu FT-857D, Yaesu FT-2000. TNX YT3W.
| |
| − |
| |
| − | ver 1.0.25 (13-Aug-2011)
| |
| − | ------------------------
| |
| − | - New contests supported: WAE DX, CW Ops - CW Open.
| |
| − | - Fixed some bugs with QTC entries.</nowiki>
| |
