Keyboard and text functions
Jump to navigation
Jump to search
Keyboard functions
| [Enter] | Log a contact |
| [Spacebar] | Move cursor between callsign entry and report fields |
| [Left arrow] or [Ctrl][B] | Move cursor one character to the left |
| [Right arrow] or [Ctrl][F] | Move cursor one character to the right |
| [Home] or [Ctrl][A] | Move cursor to the beginning of the field |
| [End] or [Ctrl][E] | Moves the cursor to the end of the field |
| [Backspace] | Delete the character located left of the cursor |
| [Tab] | Move cursor between sent RST and received number fields |
| [>] | Move cursor to next field in the main log |
| [<] | Move cursor to previous field in the main log |
| [Del] or [Ctrl][D] | Delete the character located under the cursor |
| [F11] | Clear all the fields of the current QSO, and puts the cursor into the callsign logging field |
| [Alt][W] | Clear QSO (like F11) |
| [Alt][F] | Edit QSO date and time |
| [Alt][N] | Write a note regarding this QSO |
| [Ctrl][W] | Clear the current field, if report field is cleared, initialise RST |
| [Ctrl][Z] | Undo - restores edited QSO data to prior value (see Menu:Edit#Restore_QSO) |
| [Ctrl][Left arrow] | Like [Home] |
| [Ctrl][Right arrow] | Like [End] |
| [Ctrl][+] | Silent log QSO in ESM mode |
| [Up arrow] | Move one QSO up |
| [Down arrow] | Move one QSO down |
| [PageUp] | Move 10 QSOs up |
| [PageDown] | Move 10 QSOs down |
| [Ctrl][G] | Go to a specific QSO number |
| [Ctrl][Home] | Go to first QSO in log |
| [Ctrl][End] | Go to last QSO in log |
| [Ctrl][PageDown] | Go forward 24 hours |
| [Ctrl][PageUp] | Go back 24 hours |
| [F1] | Play message #1 |
| [F2] | Play message #2 |
| [F3] | Play message #3 |
| [F4] | Play message #4 |
| [F5] | Play message #5 |
| [F6] | Play message #6 (CW / DATA only) |
| [F7] | Play message #7 (CW / DATA only) |
| [Insert] | Play the message defined for this key (CW / DATA only) |
| [+] | Play the message defined for this key (CW / DATA only) |
| [Esc] | Stop the output message instantly |
| [Alt][K] | Toggle Keyboard mode |
| [Alt][C] | Send or modify additional messages |
| [Alt][V] | Change CW speed (opens "CW-Speed" entry box) |
| [Alt][F9] | Decrease CW speed by 2 WPM |
| [Alt][F10] | Increase CW speed by 2 WPM |
| [Shift][F1] - [F7] | Record messages #1 to #7 |
| [Shift][Insert] | Record the message associated to the [Insert] key |
| [Shift][+] | Records the message associated to the [+] key |
| [Ctrl][Tab] | Toggle between Run and S&P mode (changes CW / DATA memories) |
| - |
| [F8] | N + 1 Window |
| [F9] | Check call Window |
| [F10] | Check Multipliers Window |
| [F12] | Check Partials Window |
| [Alt][A] | DX-Cluster Announcements Window |
| [Alt][B] | Skeds Window |
| [Alt][E] | Take a sked |
| [Alt][I] | Gab Window |
| [Alt][O] | DX-Cluster Monitor Window |
| [Alt][P] | Worked Prefixes |
| [Alt][R] | Rate Window |
| [Alt][S] | Summary Window |
| [Ctrl][F9] | Statistics Window |
| [*] | Switch active radio |
| [Alt][:] | Switch active radio |
| [Alt][F1] | QSY band down (20 => 40 => ) |
| [Alt][F2] | QSY band up (20 => 15 => ) |
| [Alt][F4] | QSY back to run frequency |
| [Ctrl][T] | Tune the transmitter (on CW) |
| [Ctrl][F1] and [Ctrl][F2] | Switch mode (when the contest permits and mode=MIXED or ALL) |
| [Shift][UpArrow] | RIT + |
| [Shift][DownArrow] | RIT - |
| [Shift][Delete] | RIT Clear |
| [Ctrl]{Alt}{R} | Closes and re-opens serial port and pipe connections to radios, keyers, SO2R devices etc |
| [Keypad -] | Enable Split Mode |
| [Keypad +] | Unknown Function |
| [Alt][A] | DX-Cluster Announcements Window |
| [Alt][O] | DX-Cluster Monitor Window |
| [Alt][T] | Talk to DX-Cluster |
| [Alt][F3] | Send Spot |
| [Ctrl][Enter] | Insert spot into Band Map |
| [Ctrl][Up arrow] | Grab the first upper spot in the active Band Map (in frequency regarding the active radio) |
| [Ctrl][Shift][Up arrow] | Grab the first upper spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-pointer |
| [Ctrl][Down arrow] | Grab the first lower spot in the active bandmap (in frequency regarding the active radio) |
| [Ctrl][Shift][Down arrow] | Grab the first lower spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-point station |
| [Ctrl][Space] | Grab the spot on or near the current frequency |
| [Ctrl] DoubleClick on a spot | Delete the spot without the warning window |
| [Alt] DoubleClick on a spot | Load the sub VFO with a spot frequency (if applicable) |
| [Ctrl] DoubleClick on a spot | Delete the spot without the warning window |
| [Alt] DoubleClick on a spot | Load the sub VFO with a spot frequency (if applicable) |
| [Alt][D] | Pass a station |
| [Alt][G] | Send a gab |
| [Alt][I] | Open/Close Gab Window |
| [Alt][J] | Display status of all stations in the network |
| [Alt][Y] | Toggle current QSO's station type from RUN (R1) to MULT (M) in the M/S category, or from RUN1 (R1) to RUN2 (R2) in M/2 category and vice versa. |
| If the cursor is on the logging line rather than a previously logged QSO when you press this key, the station type is changed for all new QSOs logged on that computer, | |
| Commands | Station Type) | |
| [Ctrl][F3] | Toggle current QSO (same as [Alt][Y]) |
| [Alt][Enter] | Add the call current call to the partner window |
| [Alt][Space] | Grab the call in the topmost "real time" line of the partner window |
| [Alt][Backpace] | Clear everything in the partner window |
| [Alt][1] - [9] | Grab the nth call from the partner window |
| DoubleClick on a callsign | Grab the call from the partner window |
| [Alt][L] | Open QTC RX window |
| [Ctrl][L] | Open QTC TX window |
Text functions
| CTSPACE | CW/DIGI | Shortened spaces (CT spaces) enabled |
| NOCTSPACE | CW/DIGI | Shortened spaces (CT spaces) disabled |
| FULLABBREV | CW/DIGI | Serial number | Abbreviated |
| PROABBREV | CW/DIGI | Serial number | Pro |
| SEMIABBREV | CW/DIGI | Serial number | Half abbreviated |
| NOABBREV | CW/DIGI | Serial number | Not abbreviated |
| ESM | Data Entry | Enable ESM [checked] |
| NOESM | Data Entry | Enable ESM [unchecked] |
| LZ | CW/DIGI | Serial number | Leading zeros [checked] |
| NOLZ | CW/DIGI | Serial number | Leading zeros [unchecked] |
| MSGS | CW/DIGI | Modify standard messages |
| RPT | Repeat Loop [checked] |
| NORPT | Tools | Repeat Loop [unchecked] |
| SOUND | CW/DIGI | No sound [unchecked] |
| NOSOUND | CW/DIGI | No sound [checked] |
| WORKDUPE | CW/DIGI | Work dupes (checked) The normal exchange will be sent to all dupes; the $QSOB4 message variable will be ignored |
| NOWORKDUPE | CW/DIGI | Work dupes (unchecked) |
| SYNCCW/NOSYNCCW | enable/disable cw speed syncing (SO2R) |
| SYNCSPEED | sync non-active radio cw speed to active radio speed (SO2R) |
| MULT | Station type | Mult |
| OPON (or LOGIN) | Log in as an operator |
| OPOFF (or LOGOUT) | Log out as an operator |
| RUN1 | Station type | Run 1 |
| RUN2 | Station type | Run 2 |
| RUN | Station type | Run |
| AUTORELOAD or NOAUTORELOAD | Load contest at startup | Enabled |
| BYE | Quit |
| CLEARLOG | Delete all QSO |
| CLEARLOGNOW | Equivalent to CLEARLOG, but doesn't ask for confirmation |
| CLOSE | Close |
| COPYLOG | Save a copy of the current log file in the current log directory with a timestamp added to its name |
| COPYLOGCLEAR | Equivalent to the COPYLOG command immediately followed by a CLEARLOG command |
| NEW | New |
| OPEN | Open |
| QUIT | Quit |
| RELOAD | Reopens the current opened log |
| RELOADNOW | Reopens the current opened log, without contest configuration dialog |
| REOPEN/REOPENNOW | same as RELOAD/RELOADNOW |
| RESTART | Restarts DXLog.net |
| WRITELOG (or MAKELOG) | Creating log files |
| CTYFILES or COUNTRYFILES | Data files | Country files |
| DEFINEKEYS | Redefine keyboard keys |
| NORUNSP | Disable RUN/S&P-Switchting |
| RUNSP | Enable RUN/S&P-Switchting |
| RUNSPON | Enable RUN/S&P-Switchting |
| RUNSPOFF | DISABLE RUN/S&P-Switchting |
| AUTORSPON/AUTORSPOFF | Auto Run/S&P switching on/off |
| AUTORSP/NOAUTORSP | Auto Run/S&P switching on/off |
| SETUP | Configure Interfaces |
| NET/NONET | enable/disable network communications |
| NETON/NETOFF | Same as NET/NONET |
| NETCONFIG | same as Options->Configure network |
| ILOCK/NOILOCK | enable/disable DXLog |
| ILOCKON/ILOCKOFF | Same as ILOCK/NOILOCK |
| RESET | Closes and re-opens serial port and pipe connections to radios, keyers, SO2R devices etc |
