Keyboard and text functions
Jump to navigation
Jump to search
}
}
Keyboard functions
[Enter] | Log a contact |
[Spacebar] | Move cursor between callsign entry and report fields |
[Left arrow] or [Ctrl][B] | Move cursor one character to the left |
[Right arrow] or [Ctrl][F] | Move cursor one character to the right |
[Home] or [Ctrl][A] | Move cursor to the beginning of the field |
[End] or [Ctrl][E] | Moves the cursor to the end of the field |
[Backspace] | Delete the character located left of the cursor |
[Tab] | Move cursor between sent RST and received number fields |
[>] | Move cursor to next field in the main log |
[<] | Move cursor to previous field in the main log |
[Del] or [Ctrl][D] | Delete the character located under the cursor |
[F11] | Clear all the fields of the current QSO, and puts the cursor into the callsign logging field |
[Alt][W] | Clear QSO (like F11) |
[Alt][F] | Edit QSO date and time |
[Alt][N] | Write a note regarding this QSO |
[Ctrl][W] | Clear the current field, if report field is cleared, initialise RST |
[Ctrl][Z] | Undo - restores edited QSO data to prior value (see Menu:Edit#Restore_QSO) |
[Ctrl][Left arrow] | Like [Home] |
[Ctrl][Right arrow] | Like [End] |
[Ctrl][+] | Silent log QSO in ESM mode |
[Up arrow] | Move one QSO up |
[Down arrow] | Move one QSO down |
[PageUp] | Move 10 QSOs up |
[PageDown] | Move 10 QSOs down |
[Ctrl][G] | Go to a specific QSO number |
[Ctrl][Home] | Go to first QSO in log |
[Ctrl][End] | Go to last QSO in log |
[Ctrl][PageDown] | Go forward 24 hours |
[Ctrl][PageUp] | Go back 24 hours |
[F1] | Play message #1 |
[F2] | Play message #2 |
[F3] | Play message #3 |
[F4] | Play message #4 |
[F5] | Play message #5 |
[F6] | Play message #6 (CW / DATA only) |
[F7] | Play message #7 (CW / DATA only) |
[Insert] | Play the message defined for this key (CW / DATA only) |
[+] | Play the message defined for this key (CW / DATA only) |
[Esc] | Stop the output message instantly |
[Alt][K] | Toggle Keyboard mode |
[Alt][C] | Send or modify additional messages |
[Alt][V] | Change CW speed (opens "CW-Speed" entry box) |
[Alt][F9] | Decrease CW speed by 2 WPM |
[Alt][F10] | Increase CW speed by 2 WPM |
[Shift][F1] - [F7] | Record messages #1 to #7 |
[Shift][Insert] | Record the message associated to the [Insert] key |
[Shift][+] | Records the message associated to the [+] key |
[Ctrl][Tab] | Toggle between Run and S&P mode (changes CW / DATA memories) |
- |
[F8] | N + 1 Window |
[F9] | Check call Window |
[F10] | Check Multipliers Window |
[F12] | Check Partials Window |
[Alt][A] | DX-Cluster Announcements Window |
[Alt][B] | Skeds Window |
[Alt][E] | Take a sked |
[Alt][I] | Gab Window |
[Alt][O] | DX-Cluster Monitor Window |
[Alt][P] | Worked Prefixes |
[Alt][R] | Rate Window |
[Alt][S] | Summary Window |
[Ctrl][F9] | Statistics Window |
[*] | Switch active radio |
[Alt][:] | Switch active radio |
[Alt][F1] | QSY band down (20 => 40 => ) |
[Alt][F2] | QSY band up (20 => 15 => ) |
[Alt][F4] | QSY back to run frequency |
[Ctrl][T] | Tune the transmitter (on CW) |
[Ctrl][F1] and [Ctrl][F2] | Switch mode (when the contest permits and mode=MIXED or ALL) |
[Shift][UpArrow] | RIT + |
[Shift][DownArrow] | RIT - |
[Shift][Delete] | RIT Clear |
[Ctrl]{Alt}{R} | Closes and re-opens serial port and pipe connections to radios, keyers, SO2R devices etc |
[Keypad -] | Enable Split Mode |
[Keypad +] | Unknown Function |
[Alt][A] | DX-Cluster Announcements Window |
[Alt][O] | DX-Cluster Monitor Window |
[Alt][T] | Talk to DX-Cluster |
[Alt][F3] | Send Spot |
[Ctrl][Enter] | Insert spot into Band Map |
[Ctrl][Up arrow] | Grab the first upper spot in the active Band Map (in frequency regarding the active radio) |
[Ctrl][Shift][Up arrow] | Grab the first upper spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-pointer |
[Ctrl][Down arrow] | Grab the first lower spot in the active bandmap (in frequency regarding the active radio) |
[Ctrl][Shift][Down arrow] | Grab the first lower spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-point station |
[Ctrl][Space] | Grab the spot on or near the current frequency |
[Ctrl] DoubleClick on a spot | Delete the spot without the warning window |
[Alt] DoubleClick on a spot | Load the sub VFO with a spot frequency (if applicable) |
[Ctrl] DoubleClick on a spot | Delete the spot without the warning window |
[Alt] DoubleClick on a spot | Load the sub VFO with a spot frequency (if applicable) |
[Alt][D] | Pass a station |
[Alt][G] | Send a gab |
[Alt][I] | Open/Close Gab Window |
[Alt][J] | Display status of all stations in the network |
[Keypad *] | Focus Opposite Radio |
[Alt][Y] | Toggle current QSO's station type from RUN (R1) to MULT (M) in the M/S category, or from RUN1 (R1) to RUN2 (R2) in M/2 category and vice versa. |
If the cursor is on the logging line rather than a previously logged QSO when you press this key, the station type is changed for all new QSOs logged on that computer, | |
Commands | Station Type) | |
[Ctrl][F3] | Toggle current QSO (same as [Alt][Y]) |
[Alt][Enter] | Add the call current call to the partner window |
[Alt][Space] | Grab the call in the topmost "real time" line of the partner window |
[Alt][Backpace] | Clear everything in the partner window |
[Alt][1] - [9] | Grab the nth call from the partner window |
DoubleClick on a callsign | Grab the call from the partner window |
[Alt][L] | Open QTC RX window |
[Ctrl][L] | Open QTC TX window |
Text functions
[Ctrl][Alt][Page Up] | Morse Runner increase volume |
[Ctrl][Alt][Page Down] | Morse Runner decrease volume |
[Ctrl][Alt][Right Arrow] | Morse Runner Increase Bandwidth |
[Ctrl][Alt][Left Arrow] | Morse Runner Decrease Bandwidth |
CTSPACE | CW/DIGI | Shortened spaces (CT spaces) enabled |
NOCTSPACE | CW/DIGI | Shortened spaces (CT spaces) disabled |
FULLABBREV | CW/DIGI | Serial number | Abbreviated |
PROABBREV | CW/DIGI | Serial number | Pro |
SEMIABBREV | CW/DIGI | Serial number | Half abbreviated |
NOABBREV | CW/DIGI | Serial number | Not abbreviated |
ESM | Data Entry | Enable ESM [checked] |
NOESM | Data Entry | Enable ESM [unchecked] |
LZ | CW/DIGI | Serial number | Leading zeros [checked] |
NOLZ | CW/DIGI | Serial number | Leading zeros [unchecked] |
MSGS | CW/DIGI | Modify standard messages |
RPT | Repeat Loop [checked] |
NORPT | Tools | Repeat Loop [unchecked] |
SOUND | CW/DIGI | No sound [unchecked] |
NOSOUND | CW/DIGI | No sound [checked] |
WORKDUPE | CW/DIGI | Work dupes (checked) The normal exchange will be sent to all dupes; the $QSOB4 message variable will be ignored |
NOWORKDUPE | CW/DIGI | Work dupes (unchecked) |
SYNCCW/NOSYNCCW | enable/disable cw speed syncing (SO2R) |
SYNCSPEED | sync non-active radio cw speed to active radio speed (SO2R) |
MULT | Station type | Mult |
OPON (or LOGIN) | Log in as an operator |
OPOFF (or LOGOUT) | Log out as an operator |
RUN1 | Station type | Run 1 |
RUN2 | Station type | Run 2 |
RUN | Station type | Run |
AUTORELOAD or NOAUTORELOAD | Load contest at startup | Enabled |
BYE | Quit |
CLEARLOG | Delete all QSO |
CLEARLOGNOW | Equivalent to CLEARLOG, but doesn't ask for confirmation |
CLOSE | Close |
COPYLOG | Save a copy of the current log file in the current log directory with a timestamp added to its name |
COPYLOGCLEAR | Equivalent to the COPYLOG command immediately followed by a CLEARLOG command |
NEW | New |
OPEN | Open |
QUIT | Quit |
RELOAD | Reopens the current opened log |
RELOADNOW | Reopens the current opened log, without contest configuration dialog |
REOPEN/REOPENNOW | same as RELOAD/RELOADNOW |
RESTART | Restarts DXLog.net |
WRITELOG (or MAKELOG) | Creating log files |
CTYFILES or COUNTRYFILES | Data files | Country files |
DEFINEKEYS | Redefine keyboard keys |
NORUNSP | Disable RUN/S&P-Switchting |
RUNSP | Enable RUN/S&P-Switchting |
RUNSPON | Enable RUN/S&P-Switchting |
RUNSPOFF | DISABLE RUN/S&P-Switchting |
AUTORSPON/AUTORSPOFF | Auto Run/S&P switching on/off |
AUTORSP/NOAUTORSP | Auto Run/S&P switching on/off |
SETUP | Configure Interfaces |
NET/NONET | enable/disable network communications |
NETON/NETOFF | Same as NET/NONET |
NETCONFIG | same as Options->Configure network |
ILOCK/NOILOCK | enable/disable DXLog |
ILOCKON/ILOCKOFF | Same as ILOCK/NOILOCK |
RESET | Closes and re-opens serial port and pipe connections to radios, keyers, SO2R devices etc |