Keyboard and text functions
Jump to navigation
Jump to search
Keyboard functions
[Enter] | Log a contact |
[Spacebar] | Move cursor between callsign entry and report fields |
[Left arrow] or [Ctrl][B] | Move cursor one character to the left |
[Right arrow] or [Ctrl][F] | Move cursor one character to the right |
[Home] or [Ctrl][A] | Move cursor to the beginning of the field |
[End] or [Ctrl][E] | Moves the cursor to the end of the field |
[Backspace] | Delete the character located left of the cursor |
[Tab] | Move cursor between sent RST and received number fields |
[>] | Move cursor to next field in the main log |
[<] | Move cursor to previous field in the main log |
[Del] or [Ctrl][D] | Delete the character located under the cursor |
[F11] | Clear all the fields of the current QSO, and puts the cursor into the callsign logging field |
[Alt][W] | Clear QSO (like F11) |
[Alt][F] | Edit QSO date and time |
[Alt][N] | Write a note regarding this QSO |
[Ctrl][W] | Clear the current field, if report field is cleared, initialize RST |
[Ctrl][Z] | Undo - restores edited QSO data to prior value (also menu:Edit->Restore_QSO) |
[Ctrl][Left arrow] | Like [Home] |
[Ctrl][Right arrow] | Like [End] |
[Ctrl][+] or [Ctrl][Keypad Add] | Silently log QSO |
[Up arrow] | Move one QSO up |
[Down arrow] | Move one QSO down |
[PageUp] | Move 10 QSOs up |
[PageDown] | Move 10 QSOs down |
[Ctrl][G] | Go to a specific QSO number |
[Ctrl][Home] | Go to first QSO in log |
[Ctrl][End] | Go to last QSO in log |
[Ctrl][PageDown] | Go forward 24 hours |
[Ctrl][PageUp] | Go back 24 hours |
[Ctrl][X] | Toggles the X-QSO flag which invalidates the QSO, making it not count and export as X-QSO: line in Cabrillo. |
[F1] | Play message #1 | Usually CQ |
[F2] | Play message #2 | Usually full report |
[F3] | Play message #3 | Usually contest exchange e.g. serial number |
[F4] | Play message #4 | Usually your call |
[F5] | Play message #5 | Usually the logged callsign |
[F6] | Play message #6 | Usually a request to repeat the exchange |
[F7] | Play message #7 | Usually a single questionmark |
[Insert] | Play the message defined for this key | Usually the exchange |
[+] or [Keypad Add] | Play the message defined for this key | Usually conclusion and logging of QSO |
[Esc] | Interrupt message transmission | |
[Alt][C] | Send or modify additional messages | |
[Alt][K] | Toggle Keyboard mode | |
[Ctrl][M] | Toggle ESM - Enter Sends Message | |
[Alt][V] | Change CW speed (opens "CW-Speed" entry box) | |
[Alt][F9] | Decrease CW speed by 2 WPM | |
[Alt][F10] | Increase CW speed by 2 WPM | |
[Ctrl][F9] | Contest period down (for applicable contests) | |
[Ctrl][F10] | Contest period up (for applicable contests) | |
[Shift][F1..F7] | Record messages #1 to #7 (SSB, if supported for the active DVK) or edit message #1 to #7 (CW, Digital) | |
[Shift][Insert] | Record the message associated to the [Insert] key | |
[Shift][+] | Records the message associated to the [+] key | |
[Ctrl][Tab] | Toggle between Run and S&P mode (changes CW/Digi memory sets) | |
[Ctrl][R] | Toggle CQ auto-repeat |
[F8] | N + 1 window |
[F9] | Check call window |
[F10] | Check Multipliers window |
[F12] | Check Partials window |
[Alt][A] | DX-Cluster Announcements window |
[Alt][B] | Skeds window |
[Alt][E] | Take a sked |
[Alt][I] | Gab window |
[Alt][O] | DX-Cluster Monitor window |
[Alt][P] | Worked prefixes |
[Alt][R] | Rate window |
[Alt][S] | Summary window |
[Ctrl][F9] | Statistics window |
[Alt][F1] | QSY band down (In frequency, i.e. to a longer wavelength) |
[Alt][F2] | QSY band up (In frequency, i.e. to a shorter wavelength) |
[Alt][F4] | QSY back to CQ frequency |
[Ctrl][T] | Tune the transmitter (on CW) |
[Ctrl][F1] and [Ctrl][F2] | Switch mode up and down (when the current contest permits) |
[Shift][UpArrow] | RIT adjustment up in Run, frequency adjustment up in S&P, as defined by band map orientation. |
[Shift][DownArrow] | RIT adjustment down in Run, frequency adjustment down in S&P, as defined by band map orientation. |
[Shift][Delete] | RIT clear |
[Alt][UpArrow] | Frequency adjustment up as defined by band map orientation. |
[Alt][DownArrow] | Frequency adjustment down as defined by band map orientation. |
[Shift][Alt][UpArrow] | Faster VFO adjustment up as defined by band map orientation. |
[Shift][Alt][DownArrow] | Faster VFO adjustment down as defined by band map orientation. |
[Ctrl][-] or [Ctrl][Keypad Subtract] | Toggle receiver diversity/synchronization/tracking on supported radios. |
[Ctrl][Alt][R] | Resets and reinitializes all serial port and pipe connections to radios, keyers, SO2R devices etc |
[Keypad Multiply] | Switch active radio |
[-] or [Keypad Subtract] | Enable Split Mode |
[Shift][Ctrl][Alt][F1] | Select Rx antenna 1 |
[Shift][Ctrl][Alt][F2] | Select Rx antenna 2 |
[Shift][Ctrl][Alt][F3] | Select Rx antenna 3 |
[Shift][Ctrl][Alt][F4] | Select Rx antenna 4 |
[Shift][Ctrl][Alt][F5] | Select Rx antenna 5 |
[Shift][Ctrl][Alt][F6] | Select Rx antenna 6 |
[Shift][Ctrl][Alt][F7] | Select Rx antenna 7 |
[Alt][F11] | Change RX antenna |
[Shift][Alt][F11] | Change TX antenna |
[Ctrl][F12] | Turn selected rotator to SP direction |
[Alt][F12] | Turn selected rotator to LP direction |
[Ctrl][Enter] | Insert spot into Band Map |
[Ctrl][Up arrow] | Grab the first spot above in the active bandmap and load it in VFO A in active radio (SO1R, SO2R) or active VFO (SO2V). |
[Ctrl][Shift][Up arrow] | Grab the first spot, which is a multiplier, above in the active bandmap and load it in VFO A in active radio (SO1R, SO2R) or active VFO (SO2V). |
[Ctrl][Alt][Up arrow] | Bandmap|QSY Opposite radio instead of 2nd VFO" checked: Grab the first spot above in the active bandmap and load it in VFO A of other radio (SO1R, SO2R) or VFO B (SO2V). Otherwise: Grab the first spot above in the active bandmap and load it in VFO B in active radio (SO1R, SO2R, not applicable in SO2V). |
[Ctrl][Down arrow] | Grab the first spot below in the active bandmap and load it in VFO A in active radio (SO1R, SO2R) or active VFO (SO2V). |
[Ctrl][Shift][Down arrow] | Grab the first spot, which is a multiplier, below in the active bandmap and load it in VFO A in active radio (SO1R, SO2R) or active VFO (SO2V). |
[Ctrl][Alt][Down arrow] | Bandmap|QSY Opposite radio instead of 2nd VFO" checked: Grab the first spot below in the active bandmap and load it in VFO A of other radio (SO1R, SO2R) or VFO B (SO2V). Otherwise: Grab the first spot below in the active bandmap and load it in VFO B in active radio (SO1R, SO2R, not applicable in SO2V). |
[Ctrl][Space] | Grab the spot on or near the current frequency |
[Ctrl] DoubleClick on a spot | Delete the spot without the warning window |
[Alt] DoubleClick on a spot | Load the sub VFO with a spot frequency (if applicable) |
[Ctrl] DoubleClick on a spot | Delete the spot without the warning window |
[Alt] DoubleClick on a spot | Load the sub VFO with a spot frequency (if applicable) |
[Alt][T] | Manually Send a spot or commands to the connected DX Cluster |
[Alt][D] | Pass a station |
[Alt][G] | Send a gab |
[Ctrl][Alt][G] | Send a ON4KST message |
[Alt][I] | Open/Close Gab Window |
[Alt][J] | Display status of all stations in the network |
[Ctrl][Alt][1..8] | Select scenario in SO2R Advanced |
[Ctrl][Shift][F1..F8] | On-the-fly scenario editing |
[Keypad Multiply] | Focus Opposite Radio |
[Ctrl][F3] | Toggle station type (RUN/Mult in M/S, Run1/Run2 in M/2) |
[Ctrl][O] | Login as operator. Erase entry text box to log off. |
[Comma] or [Keypad Decimal] | Manual addition of one or several calls to the partner window. |
[Alt][Enter] | Add the call current call to the partner window |
[Alt][Space] | Grab the call in the topmost "real time" line of the partner window. If empty, grab the top of the stack instead. |
[Alt][Backpace] | Clear everything in the partner window |
[Alt][1] - [9] | Grab the nth call from the partner window |
[Ctrl][1] - [9] | Replace the nth call in the partner window |
DoubleClick on a callsign | Grab the call from the partner window |
[Alt][Y] | Grab the top guess in Check Partials window |
DoubleClick on a callsign | Grab the call |
[Alt][L] | Open QTC RX window |
[Ctrl][L] | Open QTC TX window |
[Ctrl][F8] | Equivalent to F8 "AGN" but includes row number |
[Ctrl][Alt][Page Up] | Morse Runner increase volume |
[Ctrl][Alt][Page Down] | Morse Runner decrease volume |
[Ctrl][Alt][Right Arrow] | Morse Runner increase bandwidth |
[Ctrl][Alt][Left Arrow] | Morse Runner decrease bandwidth |
[Ctrl][Shift][Right Arrow] | Morse Runner increase pitch |
[Ctrl][Shift][Left Arrow] | Morse Runner decrease pitch |
[Shift][UpArrow] | RIT + in Morse Runner |
[Shift][DownArrow] | RIT - in Morse Runner |
[Shift][Delete] | RIT clear in Morse Runner |
NB. During MorseRunner operation, text command SETUP will open MorseRunner configuration panel.
Text functions
CTSPACE | Equivalent to: Options | CW/DIGI | Shortened spaces (CT spaces) [checked] |
CWAUTO or AUTOCW | Equivalent to: Options | CW/DIGI | Auto sending - Sets/disables autosending. |
NOCTSPACE | Equivalent to: Options | CW/DIGI | Shortened spaces (CT spaces) [unchecked] |
FULLABBREV | Equivalent to: Options | CW/DIGI | Serial number | Abbreviated |
PROABBREV | Equivalent to: Options | CW/DIGI | Serial number | Pro |
SEMIABBREV | Equivalent to: Options | CW/DIGI | Serial number | Half abbreviated |
NOABBREV | Equivalent to: Options | CW/DIGI | Serial number | Not abbreviated |
ESM or ESMON | Enable Enter Sends Message Mode; equivalent to: Tools | Data Entry | Enable ESM [checked] |
NOESM or ESMOFF | Disable Enter Sends Message Mode; equivalent to: Tools | Data Entry | Enable ESM [unchecked] |
LZ | Equivalent to: Options | CW/DIGI | Serial number | Leading zeros [checked] |
NOLZ | Equivalent to: Options | CW/DIGI | Serial number | Leading zeros [unchecked] |
MSGS or MESSAGES | Equivalent to: Options | CW/DIGI | Modify standard messages |
RPT | Equivalent to: Tools | Repeat Loop [checked] |
NORPT | Equivalent to: Tools | Repeat Loop [unchecked] |
SOUND | Equivalent to: Options | CW/DIGI | No sound [unchecked] |
NOSOUND | Equivalent to: Options | CW/DIGI | No sound [checked] |
SYNCCW/NOSYNCCW | Enable/disable cw speed syncing between radio/VFO (SO2R and SO2V) |
SYNCSPEED | Sync other radio/VFO CW speed with focused radio/VFO (SO2R and SO2V) |
WKSETUP or WKEY | Equivalent to: Options | WinKey configuration |
CW, SSB, LSB, USB, AM, FM | Set mode |
WORKDUPE or WORKDUPEON | Equivalent to: Options | CW/DIGI | Work dupes [checked] The normal exchange will be sent also to dupes. |
NOWORKDUPE or WORKDUPEOFF | Equivalent to: Options | CW/DIGI | Work dupes [unchecked] Causes the $QSOB4 message to be sent to all dupes when, for example, when the [Insert] key is programmed as $LOGGEDCALL $QSOB4 $GUESSEXCH $F2 |
RUNSP or RUNSPON | Equivalent to: Tools | Data entry | Enable Run/SP switching [checked] |
NORUNSP or RUNSPOFF | Equivalent to: Tools | Data entry | Enable Run/SP switching [unchecked] |
AUTORSPON or AUTORSP | Equivalent to: Tools | Data entry | Enable automatic Run/SP selection [checked] |
AUTORSPOFF or NOAUTRSP | Equivalent to: Tools | Data entry | Enable automatic Run/SP selection [unchecked] |
MULT | Equivalent to: Commands | Station type | Mult |
OPON or LOGIN | Log in as an operator |
OPOFF or LOGOUT | Log out as an operator |
RUN1 | Equivalent to: Commands | Station type | Run 1 |
RUN2 | Equivalent to: Commands | Station type | Run 2 |
RUN | Equivalent to: Commands | Station type | Run |
AUTORELOAD | Equivalent to: Options | Load contest at startup [checked] |
NOAUTORELOAD | Equivalent to: Options | Load contest at startup | [unchecked] |
BYE | Equivalent to: File | Quit |
CLEARLOG | Equivalent to: Edit | Delete all QSO |
CLEARLOGNOW | Equivalent to: CLEARLOG, but does not ask for confirmation |
CLOSE | Equivalent to: File | Close |
COPYLOG | Save a copy of the current log file in the current log directory with a timestamp added to its name |
COPYLOGCLEAR | Equivalent to the COPYLOG but with data truncation. Exact function is TBD. |
NEW | Equivalent to: File | New |
OPEN | Equivalent to: File | Open |
POSTCONTEST | Equivalent to: Edit | Postcontest mode [checked] |
NOPOSTCONTEST | Equivalent to: Edit | Postcontest mode [unchecked] |
QUIT or BYE or EXIT | Equivalent to: File | Quit |
RELOAD or REOPEN | Reopens the current opened log |
RELOADNOW or REOPENNOW | Reopens the current opened log, without the contest configuration dialog |
WRITELOG or MAKELOG | Equivalent to: File | Creating log files - Create Cabrillo log file |
CTYFILES or COUNTRYFILES | Equivalent to: Options | Data files | Country files |
DEBUGCAT | Toggle debug logging of radio 1 CAT interface |
DEBUGRCAT | For selected radio models read a simulated response from the radio as CAT communication from CATRX.bin file. |
DEFINEKEYS | Equivalent to: Options | Redefine keyboard keys |
VER or VERSION | Equivalent to: Help | About - Display the about panel |
SETUP | Equivalent to: Options | Configure Interfaces During MorseRunner simulation it opens MorseRunner setup |
NET or NETON/NONET or NETOFF | Enable/disable network communications |
NETCONFIG | Equivalent to: Options | Configure network |
ILOCK or ILOCKON | Enable DXLog.net software interlock |
NOILOCK or ILOCKOFF | Disable DXLog.net software interlock |
REMOTE | Equivalent to: Commands | Remote commands |
RESET | Closes and re-opens serial port and pipe connections to radios, keyers, SO2R devices etc |