Keyboard and text functions
Jump to navigation
Jump to search
Contents
- 1 QSO Entry line
- 2 Windows - Open and Close
- 3 Radio Control
- 4 DXCluster
- 5 Band Map
- 6 DX-Cluster Announcements
- 7 Networking
- 8 Multi Operator
- 9 SO2R
- 10 Partner Mode
- 11 Contest Recorder
- 12 Special Keys
- 13 CW Functions
- 14 Voice Keyer Control Functions
- 15 Multi Operating
- 16 Open/Close/Database Functions
- 17 Frequency Control Functions
- 18 Log synchronisation
- 19 WinKey
- 20 Other Functions
QSO Entry line
[Enter]: Log a contact [Spacebar]: Move cursor between callsign entry and report fields [Left arrow] or Ctrl-B: Move cursor one character to the left [Right arrow] or Ctrl-F: Move cursor one character to the right [Home] or Ctrl-A: Move cursor to the beginning of the field [End] or Ctrl-E: Moves the cursor to the end of the field [Backspace]: Delete the character located left of the cursor [Tab] : Move cursor between sent RST and received number fields [>]: Move cursor to next field in the main log. [<]: Move cursor to previous field in the main log. [Del] or Ctrl-D: Delete the character located under the cursor [F11]: Clear all the fields of the current QSO, and puts the cursor into the callsign logging field Alt-W: Clear QSO (like F11) Alt-F8: Clear QSO (like F11) Alt-F: Edit QSO date and time Alt-N: Write a note regarding this QSO Alt-Up arrow: Copy the previous QSO in the log Ctrl-W: Clear the current field, if report field is cleared, initialise RST Ctrl-Z: Undo - restores edited QSO data to prior value (see Menu:Edit#Restore_QSO) Ctrl-Left arrow: Like [Home] Ctrl-Right arrow: Like [End] Shift-Backspace: Delete all the characters left of the cursor Shift-Del or Ctrl-K: Delete all characters under and right of the cursor
==Moving around the log== - Warning: Moving the cursor in the log will validate any changes made in the previous log field
[Up arrow]: Move one QSO up [Down arrow]: Move one QSO down [PageUp]: Move 10 QSOs up [PageDown]: Move 10 QSOs down Ctrl-G: Go to a specific QSO number Ctrl-Home: Go to first QSO in log Ctrl-End: Go to last QSO in log Ctrl-PageDown: Go forward 24 hours Ctrl-PageUp: Go back 24 hours
==Message keys== (Run & S&P can have different information set to send)
[F1]: Play message #1. Usually CQ [F2]: Play message #2. Usually full sent report [F3]: Play message #3. Usually the serial number sent [F4]: Play message #4. Usually your call [F5]: Play message #5. Usually the logged callsign [F6]: Play message #6 (CW / DATA only) [F7]: Play message #7 (CW / DATA only) [Insert]: Play the message defined for this key (CW / DATA only) [+]: Play the message defined for this key (CW / DATA only) [Esc]: Stop the output message instantly Alt-K: Toggle Keyboard mode Alt-C: Send or modify additional messages Alt-V: Change CW speed (opens "CW-Speed" entry box) Alt-F9: Decrease CW speed by 2 WPM Alt-F10: Increase CW speed by 2 WPM Shift-F1...Shift-F7: Record messages #1 to #7 Shift-Insert: Record the message associated to the [Insert] key Shift-+: Records the message associated to the [+] key Ctrl-Tab: Toggle between Run and S&P mode (changes CW / DATA memories) Ctrl-Shift-Tab: Toggle between Run and S&P mode on the secondary radio (changes CW memories)
Windows - Open and Close
[F8]: N + 1 Window [F9]: Check call Window [F10]: Check Multipliers Window [F12]: Check Partials Window Alt-A: DX-Cluster Announcements Window Alt-B: Skeds Window Alt-E: Take a sked Alt-I: Gab Window Alt-O: DX-Cluster Monitor Window Alt-P: Worked Prefixes Alt-R: Rate Window Alt-S: Summary Window Ctrl-F9: Statistics Window
Radio Control
[-]: Split frequency - enter your receive frequency here (e.g. 7239) [*]: Switch active radio. This only works with the [*] key on the numeric keypad. See also Remapping [*] when using a Notebook or Mini keyboard. Alt-: : Switch active radio Alt-F1: QSY band down (20 => 40 => ...) Alt-F2: QSY band up (20 => 15 => ...) Alt-F4: QSY back to run frequency Alt-F5: Set run frequency Ctrl-S: Swap the frequency on both radios (SO2R) Ctrl-T: Tune the transmitter (on CW) Ctrl-F1 and Ctrl-F2: Switch mode (when the contest permits and mode=MIXED or ALL)
DXCluster
Alt-A: DX-Cluster Announcements Window Alt-O: DX-Cluster Monitor Window Alt-T: Talk to DX-Cluster Alt-F3: Send Spot
Band Map
Ctrl-Enter: Insert spot into Band Map Ctrl-Del: Delete spot on current frequency in the active Band Map Ctrl-J: Insert spot into Band Map Ctrl-Up arrow: Grab the first upper spot in the active Band Map (in frequency regarding the active radio) Ctrl-Shift-Up arrow: Grab the first upper spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-pointer Ctrl-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio) Ctrl-Shift-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-point station Ctrl-Space: Grab the spot on or near the current frequency Ctrl-DoubleClick on a spot: Delete the spot without the warning window Alt-DoubleClick on a spot: Load the sub VFO with a spot frequency (if applicable)
DX-Cluster Announcements
Ctrl-DoubleClick on a spot: Delete the spot without the warning window Alt-DoubleClick on a spot: Load the sub VFO with a spot frequency (if applicable)
Networking
Alt-D: Pass a station Alt-G: Send a gab Alt-I: Open/Close Gab Window Alt-J: Display status of all stations in the network
Multi Operator
Alt-Y: Toggle current QSO's station type from RUN (R1) to MULT (M) in the M/S category, or from RUN1 (R1) to RUN2 (R2) in M/2 category, and vice versa. If the cursor is on the logging line rather than a previously logged QSO when you press this key, the station type is changed for all new QSOs logged on that computer, i.e. it is equivalent to entering the text commands RUN/MULT or RUN1/RUN2. See Menu: Commands | Station Type. Ctrl-F3: Toggle current QSO (same as Alt-Y)
SO2R
AltGr-A, Ctrl-Alt-A: Listen to the primary radio with both ears AltGr-T, Ctrl-Alt-T: Listen to the secondary radio with both ears AltGr-S, Ctrl-Alt-S: Listen to both radios in stereo (toggle) AltGr-L, Ctrl-Alt-L: Listen to the "other" radio with both ears during transmit (headphone "latch") AltGr-R, Ctrl-Alt-R: Restore automatic control (advanced scenarios will control headphones, like $RESET) AltGr-1...AltGr-8, Ctrl-Alt-1...Ctrl-Alt-8: Select one of the eight SO2R scenarios
Partner Mode
Alt-Enter: Add the call current call to the partner window Alt-Space: Grab the call in the topmost "real time" line of the partner window Alt-Backpace: Clear everything in the partner window Alt-1...Alt-9: Grab the nth call from the partner window Ctrl-1...Ctrl-9: Swap the nth call in partner window with callsign in the logging window DoubleClick on a callsign: Grab the call from the partner window Ctrl-DoubleClick on a callsign: Delete the call from the partner window
Contest Recorder
AltGr-Enter: Play QSO AltGr-Up: Previous QSO AltGr-Down: Next QSO AltGr-Space: Play/Pause AltGr-PgUp: Rewind 30s AltGr-PgDown: FastForward 30s AltGr-Left: Rewind 5s AltGr-Right: FastForward 5s Some keyboards do not have an AltGr key, so use Ctrl+Alt instead.
Special Keys
Alt-L: Open QTC RX window (to be used by EU stations) Ctrl-L: Open QTC TX window (to be used by DX stations)
CW Functions
CORRECT: Equivalent to Options | CW | Correction | Enabled NOCORRECT: Equivalent to Options | CW | Correction | Disabled CTSPACE: Equivalent to Options | CW | Shortened spaces (CT spaces) enabled NOCTSPACE: Equivalent to Options | CW | Shortened spaces (CT spaces) disabled CUTON: Enable cut numbers translation CUTOFF: Disable cut numbers translation CWAUTO: Enable CW Auto Sending Mode CWAUTO3: Start CW Auto Sending after 3 characters in the callsign field CWAUTO4: Start CW Auto Sending after 4 characters in the callsign field CWAUTOOFF (or NOCWAUTO): Disable CW Auto Sending Mode CWFULLABBREV (or FULLABBREV): Equivalent to Options | CW | Serial number | Abbreviated CWPROABBREV (or PROABBREV): Equivalent to Options | CW | Serial number | Pro CWSEMIABBREV (or SEMIABBREV): Equivalent to Options | CW | Serial number | Half abbreviated NOCWABBREV (or NOABBREV): Equivalent to Options | CW | Serial number | Not abbreviated ESM (or NOESM): Enable/disable Enter Sends Message Mode; equivalent to Tools | Data Entry | Enable ESM [checked] LEADINGZEROS (or LZ): Equivalent to Options | CW | Serial number | Leading zeros [checked] NOLEADINGZEROS (or NOLZ): Equivalent to Options | CW | Serial number | Leading zeros [unchecked] MESSAGES (or MSGS): Equivalent to Options | CW | Modify standard messages... REPEAT (or RPT): Equivalent to Options | Automatic CQ repeat mode [checked] RPTDELAY: Equivalent to Tools / Automatic CQ repeat, with the focus set to the repeat interval field NOREPEAT (or NORPT): Equivalent to Options | Automatic CQ repeat mode [unchecked] SMARTCORRECT (or SMART): Equivalent to Options | CW | Correction | Smart Correction enabled NOSMARTCORREC (or NOSMART): Equivalent to Options | CW | Correction | Smart Correction disabled SOUND: Equivalent to Options | CW | No sound [unchecked] NOSOUND: Equivalent to Options | CW | No sound [checked] SPEED (or CWSPEED) Equivalent to Commands | CW speed TUNE: Equivalent to Commands | Carrier VARIABLES: Equivalent to Options | CW | Custom variables... WEIGHT (or CWWEIGHT): Equivalent to Commands | CW weight WORKDUPE (or WORKDUPEON): Equivalent to Options | CW | Work dupes (checked). The normal exchange will be sent to all dupes; the $QSOB4 message variable will be ignored. NOWORKDUPE (or WORKDUPEOFF): Equivalent to Options | CW | Work dupes (unchecked). Causes the $QSOB4 message to be sent to all dupes instead of the exchange, for example, when the [Insert] key is programmed as $LOGGEDCALL $QSOB4 $GUESSEXCH $F2
Voice Keyer Control Functions
MIC: Enables the mic input when the Voice Keyer (VK) is not playing NOMIC: Mutes the mic input when the VK is not playing (default) MICWHENPLAY: Enables the mic input when the VK is playing NOMICWHENPLAY: Mutes the mic input when the VK is playing (default)
Multi Operating
BRIDGEHEAD: Make the current station a Bridgehead station INVENTORY (or INV): Requests all connected Stations to send their version number. Time Master stations are indicated by a T character, Bridgeheads by the character B. MOVEINMYLOG: Equivalent to tag Edit | Move in my log only MULT: Equivalent to Commands | Station type | Mult NOBRIDGEHEAD: Make the current station a non Bridgehead station NOMOVEINMYLOG: Equivalent to untag Edit | Move in my log only NOSCROLLMYLOG: Equivalent to untag Edit | Move in my log only NOSUPPORT (or NOPARTNER): Equivalent to Commands | Station type | Support [unchecked] OPNAME (or MYNAME): Edit current operator name (used in NAQP M/2 only) OPON (or LOGIN): Log in as an operator OPOFF (or LOGOUT): Log out as an operator RUN1: Equivalent to Commands | Station type | Run 1 RUN2: Equivalent to Commands | Station type | Run 2 RUN: Equivalent to Commands | Station type | Run SUPPORT (or PARTNER): Equivalent to Commands | Station type | Support [checked] SCROLLMYLOG: Equivalent to tag Edit | Move in my log only
Open/Close/Database Functions
AUTORELOAD or NOAUTORELOAD: Equivalent to Options | Load contest at startup | Enabled BYE: Equivalent to File | Quit CLEARLOG: Equivalent to Edit | Delete all QSO CLEARLOGNOW: Equivalent to CLEARLOG, but doesn't ask for confirmation. Use with caution! CLOSE: Equivalent to File | Close COPYLOG: Save a copy of the current log file (.wt4) in the current log directory with a timestamp added to its name COPYLOGCLEAR: Equivalent to the COPYLOG command immediately followed by a CLEARLOG command NEW: Equivalent to File | New OPEN: Equivalent to File | Open QUIT (or EXIT): Equivalent to File | Quit RELOAD (or REOPEN): Reopens the current opened file RELOADNOW (or REOPENNOW): Reopens the current opened file, but does not display the contest configuration dialog. RESTART: Restarts Win-Test SAVELOG: Equivalent to File | Backup contest WRITEDB: Equivalent to File | Update database WRITELOG (or MAKELOG): Equivalent to File | Creating log files
Frequency Control Functions
PASSFREQ (or QSYFREQ): Equivalent to Commands | QSY frequency QSX: Equivalent to Commands | Split frequency NOQSX (or SPLITOFF): turns split operation off RUNFREQ: Moves to last Run frequency, equivalent to Alt-F4 SPLITFREQ: Equivalent to Commands | Split frequency NOSPLIT (or SPLITOFF): turns split operation off SWAP: Equivalent to Commands | Swap the frequency on both radios
Log synchronisation
SYNC (or SYNLOGS): Equivalent to Options | Disable log synchronization on network (unchecked) NOSYNC (or NOSYNLOGS): Equivalent to Options | Disable log synchronization on network (checked)
WinKey
WKSETUP: Equivalent to Options | WinKey configuration... WKSWAP (or WKREVERSE): Equivalent to Options | WinKey configuration... | Swap paddles. Reverse the paddles attached to your WinKey. This is a toggle; paddles change every time this command is run.
Other Functions
AUTOCQ or CQAUTO: Enable automatic CQ Repeat mode AUTOCW or CWAUTO: Enable CW Auto Send CLOSEALL: Equivalent to Windows | Close all CTYFILES or COUNTRYFILES: Eq. to Options | Data files | Country files... DEFINEKEYS: Equivalent to Options | Redefine keyboard keys EZSETUP: Equivalent to Options / EZMaster configuration... HEADERS: Equivalent to Options | Log display | Hide headers disabled NOHEADERS: Equivalent to Options | Log display | Hide headers enabled HELP: Open reference manual KEYB: Change keyboard layout, append layout designator with slash, like KEYB/FRA,KEYB/DEU, KEYB/ENU; see [1] for details. MKSETUP: Equivalent to Options / MK/MKII/MK2R configuration... MP3SETUP: Equivalent to Options / MP3 configuration... NOAUTOCQ or NOCQAUTO: Disable automatic CQ Repeat mode NOAUTOCW or NOCWAUTO: Disable CW Auto Send NORPTESCONLY: Stop AutoCQ by any keyboard activity NORUNSP: Disable RUN/S&P-Switchting NOTEXTCMDTIP (or NOTXTCMDTIP): Don't display tooltips in Menu operations QUICKQSL: Enable intelligent Quick QSL feature REMAPKEYS: Equivalent to Options | Redefine keyboard keys REMOTE: Equivalent to Commands | Remote commands.... Opens the Remote Commands Dialog RPTESCONLY: Stop AutoCQ by pressing the Escape key only RTTYSETUP: Equivalent to Options | RTTY Configuration... RUNSP: Enable RUN/S&P-Switchting RUNSPON: Enable RUN/S&P-Switchting RUNSPOFF: DISABLE RUN/S&P-Switchting SCRIPTS: Equivalent to Tools | Scripts Manager SETUP: Equivalent to Options | Configure Interfaces TEXTCMDTIP (or TXTCMDTIP): Display tooltips in Menu operations VERSION: Equivalent to Help | About WCY: Equivalent to Windows | Solar Activity | Displayed data | WCY WWV: Equivalent to Windows | Solar Activity | Displayed data | WWV