$13
|
(Data Modes) Send carriage return character.
|
$!ABCD
|
Execute script with name ABCD.
|
$!DISABLE!ABCD
|
Disable script with name "ABCD".
|
$!ENABLE!ABCD
|
Enable script with name "ABCD".
|
$AILOCK
|
Enable interlock blocking.
|
$ALTERNATECQ
|
(or $ACQ) swaps radio focus and sends CQ.
|
$BANDIDpppp
|
Send band of Radio 1 of station pppp in the network. E.g. $BANDIDMULT will send band of radio 1 of station with ID RUN1.
|
$BANDOR
|
Returns band of non focused radio.
|
$CHECK
|
Function unclear.
|
$CHECKCALL
|
Check validity of entered callsign (against general and contest rules).
|
$CLEARRIT
|
Set RIT to zero on supported radios.
|
$CORRECT
|
Send corrected callsign. Send nothing if callsign not corrected.
|
$CQ
|
Send CQ on focused radio. (Creates infinite loop if used with key F1.)
|
$CQZONE
|
Own CQ Zone from Station Data.
|
$CR
|
Log QSO.
|
$CTRLPLUS
|
Silently log QSO.
|
$CURRENT
|
Sends current callsign even if $CR present later in the macro.
|
$CURRENTCALL
|
Equivalent to $CURRENT.
|
$DELAY=###
|
Wait ### milliseconds.
|
$FOCUS1
|
Change Focus to Radio 1.
|
$FOCUS2
|
Change Focus to Radio 2.
|
$FOCUSCALL
|
Move focus to Callsign field.
|
$FOCUSRCVD
|
Move focus to Rcvd field.
|
$FOCUSREC1
|
Move focus to RecInfo field.
|
$FOCUSREC2
|
Move focus to RecInfo2 field.
|
$FOCUSREC3
|
Move focus to RecInfo3 field.
|
$FREQIDpppp
|
Send frequency of Radio 1 of station pppp in the network. E.g. $FREQIDRUN1 will send frequency of radio 1 of station with ID RUN1.
|
$FREQnnn
|
Sends the frequency of the networked primary radio found on this band. Band nnn is 160, 80...15, 10, 50, 144, etc.
|
$FREQOR
|
Frequency of the other radio in SO2R.
|
$FREQP
|
Frequency of Radio 1.
|
$FREQPASSnnn
|
TBD
|
$FREQS
|
Frequency of Radio 2.
|
$F1-$F7
|
Send or play back the message associated to the function key.
|
$GRABPARTNER
|
Grabs first callsign from the Partner stack.
|
$GRABSPOT
|
Grabs spot from the bandmap on the current frequency.
|
$GRID
|
The full Maidenhead Locator from Station Data.
|
$GRID4
|
The first four characters of the Maidenhead Locator from Station Data.
|
$INSERT
|
Send message associated with the [INS] key.
|
$ITUZONE
|
ITU Zone from Station Data.
|
$LOGQSO
|
Log QSO.
|
$MK2R=cmd
|
Send command to MK2R.
|
$MSG1-$MSG12
|
Additional CW messages.
|
$MYCALL
|
Callsign set in Station Data.
|
$MYDXCC
|
Own DXCC Prefix.
|
$MYITUZONE
|
ITU Zone from Station Data.
|
$MYNAME
|
Sends operator name, set in contest configuration.
|
$NEXT
|
Sends the callsign of the next QSO line when a $CR is included in the message.
|
$NEXTCALL
|
Sends the callsign of the next QSO line when a $CR is included in the message.
|
$NEXTSERIAL
|
Sends next QSO serial number.
|
$OPNAME
|
Equivalent to $MYNAME.
|
$OTRSP=cmd
|
Send command to connected OTRSP device.
|
$PBINS
|
Plays back DVK memory associated with INSERT key. On ICOM and microHAM this is #8.
|
$PBPLUS
|
Plays back DVK memory associated with PLUS key. On microHAM this is #9.
|
$PILOCK
|
Disable interlock blocking.
|
$PLUS
|
Sends message associated with the [+] key.
|
$PREV_RCVD
|
Previous received serial.
|
$PREVSERIAL
|
Previous QSO serial number.
|
$QQSLRESET
|
Reset Quick QSL timer.
|
$QSOB4
|
Sends the QSOB4 message if "Work Dupes" is not enabled.
|
$QSOB4WIPE
|
Sends the QSOB4 message if "Work Dupes" is not enable and wipes entry field.
|
$R1R1
|
(SO2R) Sets the headphone audio routing to radio 1 in both ears.
|
$R1R2
|
(SO2R) Sets the headphone audio routing to radio 1 in left ear and radio 2 in right ear.
|
$R2R1
|
(SO2R) Sets the headphone audio routing to radio 2 in left ear and radio 1 in right ear.
|
$R2R2
|
(SO2R) Sets the headphone audio routing to radio 2 in both ears.
|
$RCVD
|
Sends received exchange without RST.
|
$RECINFO
|
Sends second part of received exchange, if applicable.
|
$REPEAT
|
Restarts the repeating CQ sequence.
|
$RESERVENR
|
Sends reservation request for serial number to number server.
|
$RESET
|
Cancels any manual change made in the audio control.
|
$RST
|
Sends report from RST Sent field (normally 5NN).
|
$SERIAL
|
sends current QSO Serial Number, or previous serial number if the log entry field is empty. Obeys abbreviation settings for CW.
|
$SERIALNOAB
|
sends unabbreviated, current QSO Serial Number, or previous serial number if the log entry field is empty.
|
$SPACE
|
Step Focus (Same as pressing space bar).
|
$SPACEBAR
|
Step Focus (Same as pressing space bar).
|
$STATE
|
Sends State/Province set in contest configuration.
|
$SWAPFOCUS
|
Swap radio focus.
|
$TR1
|
(SO2R) Transmit Radio 1.
|
$TR2
|
(SO2R) Transmit Radio 2.
|
$TRS
|
(SO2R) Transmit on radio opposite to focus.
|
$TU
|
Sends "TU".
|
$WAZZONE
|
Own WAZ zone from station configuration.
|
$WIPE
|
Wipe entry field.
|
&xy
|
CW prosign where xy are merged to one character.
|
+
|
increase CW speed by 4 wpm.
|
-
|
decrease CW speed by 4 wpm.
|
^
|
Half wordspace character in CW.
|
~
|
At the end of a variable means "no space" will be inserted.
|