Difference between revisions of "Keyboard and text functions"
Jump to navigation
Jump to search
(Created page with "==Keyboard Functions== * '''QSO Entry line''' [Enter]: Log a contact [Spacebar]: Move cursor between callsign entry and report fields [Left arrow] or Ctrl-B: Move cursor o...") |
|||
Line 150: | Line 150: | ||
Alt-L: Open QTC RX window (to be used by EU stations) | Alt-L: Open QTC RX window (to be used by EU stations) | ||
Ctrl-L: Open QTC TX window (to be used by DX stations) | Ctrl-L: Open QTC TX window (to be used by DX stations) | ||
+ | |||
+ | ==Text Functions== |
Revision as of 10:44, 10 April 2015
Keyboard Functions
- QSO Entry line
[Enter]: Log a contact [Spacebar]: Move cursor between callsign entry and report fields [Left arrow] or Ctrl-B: Move cursor one character to the left [Right arrow] or Ctrl-F: Move cursor one character to the right [Home] or Ctrl-A: Move cursor to the beginning of the field [End] or Ctrl-E: Moves the cursor to the end of the field [Backspace]: Delete the character located left of the cursor [Tab] : Move cursor between sent RST and received number fields [>]: Move cursor to next field in the main log. [<]: Move cursor to previous field in the main log. [Del] or Ctrl-D: Delete the character located under the cursor [F11]: Clear all the fields of the current QSO, and puts the cursor into the callsign logging field Alt-W: Clear QSO (like F11) Alt-F8: Clear QSO (like F11) Alt-F: Edit QSO date and time Alt-N: Write a note regarding this QSO Alt-Up arrow: Copy the previous QSO in the log Ctrl-W: Clear the current field, if report field is cleared, initialise RST Ctrl-Z: Undo - restores edited QSO data to prior value (see Menu:Edit#Restore_QSO) Ctrl-Left arrow: Like [Home] Ctrl-Right arrow: Like [End] Shift-Backspace: Delete all the characters left of the cursor Shift-Del or Ctrl-K: Delete all characters under and right of the cursor
- Moving around the log - Warning: Moving the cursor in the log will validate any changes made in the previous log field
[Up arrow]: Move one QSO up [Down arrow]: Move one QSO down [PageUp]: Move 10 QSOs up [PageDown]: Move 10 QSOs down Ctrl-G: Go to a specific QSO number Ctrl-Home: Go to first QSO in log Ctrl-End: Go to last QSO in log Ctrl-PageDown: Go forward 24 hours Ctrl-PageUp: Go back 24 hours
- Message keys (Run & S&P can have different information set to send)
[F1]: Play message #1. Usually CQ [F2]: Play message #2. Usually full sent report [F3]: Play message #3. Usually the serial number sent [F4]: Play message #4. Usually your call [F5]: Play message #5. Usually the logged callsign [F6]: Play message #6 (CW / DATA only) [F7]: Play message #7 (CW / DATA only) [Insert]: Play the message defined for this key (CW / DATA only) [+]: Play the message defined for this key (CW / DATA only) [Esc]: Stop the output message instantly Alt-K: Toggle Keyboard mode Alt-C: Send or modify additional messages Alt-V: Change CW speed (opens "CW-Speed" entry box) Alt-F9: Decrease CW speed by 2 WPM Alt-F10: Increase CW speed by 2 WPM Shift-F1...Shift-F7: Record messages #1 to #7 Shift-Insert: Record the message associated to the [Insert] key Shift-+: Records the message associated to the [+] key Ctrl-Tab: Toggle between Run and S&P mode (changes CW / DATA memories) Ctrl-Shift-Tab: Toggle between Run and S&P mode on the secondary radio (changes CW memories)
- Windows - Open and Close
[F8]: N + 1 Window [F9]: Check call Window [F10]: Check Multipliers Window [F12]: Check Partials Window Alt-A: DX-Cluster Announcements Window Alt-B: Skeds Window Alt-E: Take a sked Alt-I: Gab Window Alt-O: DX-Cluster Monitor Window Alt-P: Worked Prefixes Alt-R: Rate Window Alt-S: Summary Window Ctrl-F9: Statistics Window
- Radio Control
[-]: Split frequency - enter your receive frequency here (e.g. 7239) [*]: Switch active radio. This only works with the [*] key on the numeric keypad. See also Remapping [*] when using a Notebook or Mini keyboard. Alt-: : Switch active radio Alt-F1: QSY band down (20 => 40 => ...) Alt-F2: QSY band up (20 => 15 => ...) Alt-F4: QSY back to run frequency Alt-F5: Set run frequency Ctrl-S: Swap the frequency on both radios (SO2R) Ctrl-T: Tune the transmitter (on CW) Ctrl-F1 and Ctrl-F2: Switch mode (when the contest permits and mode=MIXED or ALL)
- DXCluster
Alt-A: DX-Cluster Announcements Window Alt-O: DX-Cluster Monitor Window Alt-T: Talk to DX-Cluster Alt-F3: Send Spot
- Band Map
Ctrl-Enter: Insert spot into Band Map Ctrl-Del: Delete spot on current frequency in the active Band Map Ctrl-J: Insert spot into Band Map Ctrl-Up arrow: Grab the first upper spot in the active Band Map (in frequency regarding the active radio) Ctrl-Shift-Up arrow: Grab the first upper spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-pointer Ctrl-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio) Ctrl-Shift-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-point station Ctrl-Space: Grab the spot on or near the current frequency Ctrl-DoubleClick on a spot: Delete the spot without the warning window Alt-DoubleClick on a spot: Load the sub VFO with a spot frequency (if applicable)
- DX-Cluster Announcements
Ctrl-DoubleClick on a spot: Delete the spot without the warning window Alt-DoubleClick on a spot: Load the sub VFO with a spot frequency (if applicable)
- Networking
Alt-D: Pass a station Alt-G: Send a gab Alt-I: Open/Close Gab Window Alt-J: Display status of all stations in the network
- Multi Operator
Alt-Y: Toggle current QSO's station type from RUN (R1) to MULT (M) in the M/S category, or from RUN1 (R1) to RUN2 (R2) in M/2 category, and vice versa. If the cursor is on the logging line rather than a previously logged QSO when you press this key, the station type is changed for all new QSOs logged on that computer, i.e. it is equivalent to entering the text commands RUN/MULT or RUN1/RUN2. See Menu: Commands | Station Type. Ctrl-F3: Toggle current QSO (same as Alt-Y)
- SO2R
AltGr-A, Ctrl-Alt-A: Listen to the primary radio with both ears AltGr-T, Ctrl-Alt-T: Listen to the secondary radio with both ears AltGr-S, Ctrl-Alt-S: Listen to both radios in stereo (toggle) AltGr-L, Ctrl-Alt-L: Listen to the "other" radio with both ears during transmit (headphone "latch") AltGr-R, Ctrl-Alt-R: Restore automatic control (advanced scenarios will control headphones, like $RESET) AltGr-1...AltGr-8, Ctrl-Alt-1...Ctrl-Alt-8: Select one of the eight SO2R scenarios
- Partner Mode
Alt-Enter: Add the call current call to the partner window Alt-Space: Grab the call in the topmost "real time" line of the partner window Alt-Backpace: Clear everything in the partner window Alt-1...Alt-9: Grab the nth call from the partner window Ctrl-1...Ctrl-9: Swap the nth call in partner window with callsign in the logging window DoubleClick on a callsign: Grab the call from the partner window Ctrl-DoubleClick on a callsign: Delete the call from the partner window
- Contest Recorder
AltGr-Enter: Play QSO AltGr-Up: Previous QSO AltGr-Down: Next QSO AltGr-Space: Play/Pause AltGr-PgUp: Rewind 30s AltGr-PgDown: FastForward 30s AltGr-Left: Rewind 5s AltGr-Right: FastForward 5s Some keyboards do not have an AltGr key, so use Ctrl+Alt instead.
- Special Keys
Alt-L: Open QTC RX window (to be used by EU stations) Ctrl-L: Open QTC TX window (to be used by DX stations)