Keyboard and text functions
Jump to navigation
Jump to search
Contents
- 1 Keyboard functions
- 2 QSO Entry line
- 3 Moving around the log
- 4 Message keys
- 5 Windows - Open and Close
- 6 Radio Control
- 7 DXCluster
- 8 Band Map
- 9 DX-Cluster Announcements
- 10 Networking
- 11 Multi Operator
- 12 SO2R
- 13 Partner Mode
- 14 Contest Recorder
- 15 Special Keys
- 16 Text functions
- 17 CW Functions
- 18 Multi Operating
- 19 Open/Close/Database Functions
- 20 Other Functions
Keyboard functions
QSO Entry line
[Enter]: Log a contact [Spacebar]: Move cursor between callsign entry and report fields [Left arrow] or Ctrl-B: Move cursor one character to the left [Right arrow] or Ctrl-F: Move cursor one character to the right [Home] or Ctrl-A: Move cursor to the beginning of the field [End] or Ctrl-E: Moves the cursor to the end of the field [Backspace]: Delete the character located left of the cursor [Tab] : Move cursor between sent RST and received number fields [>]: Move cursor to next field in the main log. [<]: Move cursor to previous field in the main log. [Del] or Ctrl-D: Delete the character located under the cursor [F11]: Clear all the fields of the current QSO, and puts the cursor into the callsign logging field Alt-W: Clear QSO (like F11) Alt-F: Edit QSO date and time Alt-N: Write a note regarding this QSO Ctrl-W: Clear the current field, if report field is cleared, initialise RST Ctrl-Z: Undo - restores edited QSO data to prior value (see Menu:Edit#Restore_QSO) Ctrl-Left arrow: Like [Home] Ctrl-Right arrow: Like [End]
Moving around the log
Warning: Moving the cursor in the log will validate any changes made in the previous log field
[Up arrow]: Move one QSO up [Down arrow]: Move one QSO down [PageUp]: Move 10 QSOs up [PageDown]: Move 10 QSOs down Ctrl-G: Go to a specific QSO number Ctrl-Home: Go to first QSO in log Ctrl-End: Go to last QSO in log Ctrl-PageDown: Go forward 24 hours Ctrl-PageUp: Go back 24 hours
Message keys
Run & S&P can have different information set to send
[F1]: Play message #1. Usually CQ [F2]: Play message #2. Usually full sent report [F3]: Play message #3. Usually the serial number sent [F4]: Play message #4. Usually your call [F5]: Play message #5. Usually the logged callsign [F6]: Play message #6 (CW / DATA only) [F7]: Play message #7 (CW / DATA only) [Insert]: Play the message defined for this key (CW / DATA only) [+]: Play the message defined for this key (CW / DATA only) [Esc]: Stop the output message instantly Alt-K: Toggle Keyboard mode Alt-C: Send or modify additional messages Alt-V: Change CW speed (opens "CW-Speed" entry box) Alt-F9: Decrease CW speed by 2 WPM Alt-F10: Increase CW speed by 2 WPM Shift-F1...Shift-F7: Record messages #1 to #7 Shift-Insert: Record the message associated to the [Insert] key Shift-+: Records the message associated to the [+] key Ctrl-Tab: Toggle between Run and S&P mode (changes CW / DATA memories) Ctrl-Shift-Tab: Toggle between Run and S&P mode on the secondary radio (changes CW memories)
Windows - Open and Close
[F8]: N + 1 Window [F9]: Check call Window [F10]: Check Multipliers Window [F12]: Check Partials Window Alt-A: DX-Cluster Announcements Window Alt-B: Skeds Window Alt-E: Take a sked Alt-I: Gab Window Alt-O: DX-Cluster Monitor Window Alt-P: Worked Prefixes Alt-R: Rate Window Alt-S: Summary Window Ctrl-F9: Statistics Window
Radio Control
[-]: Split frequency - enter your receive frequency here (e.g. 7239) [*]: Switch active radio. This only works with the [*] key on the numeric keypad. Alt-: : Switch active radio Alt-F1: QSY band down (20 => 40 => ...) Alt-F2: QSY band up (20 => 15 => ...) Alt-F4: QSY back to run frequency Alt-F5: Set run frequency Ctrl-S: Swap the frequency on both radios (SO2R) Ctrl-T: Tune the transmitter (on CW) Ctrl-F1 and Ctrl-F2: Switch mode (when the contest permits and mode=MIXED or ALL) Shift-UpArrow: RIT + Shift-DownArrow: RIT - Shift-Delete: RIT Clear
DXCluster
Alt-A: DX-Cluster Announcements Window Alt-O: DX-Cluster Monitor Window Alt-T: Talk to DX-Cluster Alt-F3: Send Spot
Band Map
Ctrl-Enter: Insert spot into Band Map Ctrl-Del: Delete spot on current frequency in the active Band Map Ctrl-J: Insert spot into Band Map Ctrl-Up arrow: Grab the first upper spot in the active Band Map (in frequency regarding the active radio) Ctrl-Shift-Up arrow: Grab the first upper spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-pointer Ctrl-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio) Ctrl-Shift-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-point station Ctrl-Space: Grab the spot on or near the current frequency Ctrl-DoubleClick on a spot: Delete the spot without the warning window Alt-DoubleClick on a spot: Load the sub VFO with a spot frequency (if applicable)
DX-Cluster Announcements
Ctrl-DoubleClick on a spot: Delete the spot without the warning window Alt-DoubleClick on a spot: Load the sub VFO with a spot frequency (if applicable)
Networking
Alt-D: Pass a station Alt-G: Send a gab Alt-I: Open/Close Gab Window Alt-J: Display status of all stations in the network
Multi Operator
Alt-Y: Toggle current QSO's station type from RUN (R1) to MULT (M) in the M/S category, or from RUN1 (R1) to RUN2 (R2) in M/2 category,
and vice versa. If the cursor is on the logging line rather than a previously logged QSO when you press this key, the station type is changed for all new QSOs
logged on that computer, i.e. it is equivalent to entering the text commands RUN/MULT or RUN1/RUN2. See Menu: Commands | Station Type. Ctrl-F3: Toggle current QSO (same as Alt-Y)
SO2R
AltGr-A, Ctrl-Alt-A: Listen to the primary radio with both ears AltGr-T, Ctrl-Alt-T: Listen to the secondary radio with both ears AltGr-S, Ctrl-Alt-S: Listen to both radios in stereo (toggle) AltGr-L, Ctrl-Alt-L: Listen to the "other" radio with both ears during transmit (headphone "latch") AltGr-R, Ctrl-Alt-R: Restore automatic control (advanced scenarios will control headphones, like $RESET) AltGr-1...AltGr-8, Ctrl-Alt-1...Ctrl-Alt-8: Select one of the eight SO2R scenarios
Partner Mode
Alt-Enter: Add the call current call to the partner window Alt-Space: Grab the call in the topmost "real time" line of the partner window Alt-Backpace: Clear everything in the partner window Alt-1...Alt-9: Grab the nth call from the partner window Ctrl-1...Ctrl-9: Swap the nth call in partner window with callsign in the logging window DoubleClick on a callsign: Grab the call from the partner window Ctrl-DoubleClick on a callsign: Delete the call from the partner window
Contest Recorder
AltGr-Enter: Play QSO AltGr-Up: Previous QSO AltGr-Down: Next QSO AltGr-Space: Play/Pause AltGr-PgUp: Rewind 30s AltGr-PgDown: FastForward 30s AltGr-Left: Rewind 5s AltGr-Right: FastForward 5s Some keyboards do not have an AltGr key, so use Ctrl+Alt instead.
Special Keys
Alt-L: Open QTC RX window (to be used by EU stations) Ctrl-L: Open QTC TX window (to be used by DX stations)
Text functions
CW Functions
CTSPACE: Equivalent to Options | CW/DIGI | Shortened spaces (CT spaces) enabled NOCTSPACE: Equivalent to Options | CW/DIGI | Shortened spaces (CT spaces) disabled FULLABBREV: Equivalent to Options | CW/DIGI | Serial number | Abbreviated PROABBREV: Equivalent to Options | CW/DIGI | Serial number | Pro SEMIABBREV: Equivalent to Options | CW/DIGI | Serial number | Half abbreviated NOABBREV: Equivalent to Options | CW/DIGI | Serial number | Not abbreviated ESM: Enable Enter Sends Message Mode; equivalent to Tools | Data Entry | Enable ESM [checked] NOESM: Disable Enter Sends Message Mode; equivalent to Tools | Data Entry | Enable ESM [unchecked] LZ: Equivalent to Options | CW/DIGI | Serial number | Leading zeros [checked] NOLZ: Equivalent to Options | CW/DIGI | Serial number | Leading zeros [unchecked] MSGS: Equivalent to Options | CW/DIGI | Modify standard messages... RPT: Equivalent to Tools | Repeat Loop [checked] NORPT: Equivalent to Tools | Repeat Loop [unchecked] SOUND: Equivalent to Options | CW/DIGI | No sound [unchecked] NOSOUND: Equivalent to Options | CW/DIGI | No sound [checked] WORKDUPE: Equivalent to Options | CW/DIGI | Work dupes (checked). The normal exchange will be sent to all dupes;
the $QSOB4 message variable will be ignored. NOWORKDUPE: Equivalent to Options | CW/DIGI | Work dupes (unchecked). Causes the $QSOB4 message to be sent to all dupes instead
of the exchange, for example, when the [Insert] key is programmed as $LOGGEDCALL $QSOB4 $GUESSEXCH $F2
Multi Operating
MULT: Equivalent to Commands | Station type | Mult OPON (or LOGIN): Log in as an operator OPOFF (or LOGOUT): Log out as an operator RUN1: Equivalent to Commands | Station type | Run 1 RUN2: Equivalent to Commands | Station type | Run 2 RUN: Equivalent to Commands | Station type | Run
Open/Close/Database Functions
AUTORELOAD or NOAUTORELOAD: Equivalent to Options | Load contest at startup | Enabled. BYE: Equivalent to File | Quit. CLEARLOG: Equivalent to Edit | Delete all QSO. CLEARLOGNOW: Equivalent to CLEARLOG, but doesn't ask for confirmation. Use with caution! CLOSE: Equivalent to File | Close. COPYLOG: Save a copy of the current log file in the current log directory with a timestamp added to its name. COPYLOGCLEAR: Equivalent to the COPYLOG command immediately followed by a CLEARLOG command. NEW: Equivalent to File | New. OPEN: Equivalent to File | Open. QUIT: Equivalent to File | Quit. RELOAD: Reopens the current opened file. RELOADNOW: Reopens the current opened file, but does not display the contest configuration dialog. RESTART: Restarts DLlog.net. WRITELOG (or MAKELOG): Equivalent to File | Creating log files.
Other Functions
CTYFILES or COUNTRYFILES: Eq. to Options | Data files | Country files... DEFINEKEYS: Equivalent to Options | Redefine keyboard keys NORUNSP: Disable RUN/S&P-Switchting RUNSP: Enable RUN/S&P-Switchting RUNSPON: Enable RUN/S&P-Switchting RUNSPOFF: DISABLE RUN/S&P-Switchting SETUP: Equivalent to Options | Configure Interfaces