Keyboard and text functions
Jump to navigation
Jump to search
Keyboard functions
| [Enter] | Log a contact |
| [Spacebar] | Move cursor between callsign entry and report fields. |
| [Left arrow] or [Ctrl][B] | Move cursor one character to the left. |
| [Right arrow] or [Ctrl][F] | Move cursor one character to the right. |
| [Home] or [Ctrl][A] | Move cursor to the beginning of the field. |
| [End] or [Ctrl][E] | Moves the cursor to the end of the field. |
| [Backspace] | Delete the character located left of the cursor. |
| [Tab] | Move cursor between sent RST and received number fields. |
| [>] | Move cursor to next field in the main log. |
| [<] | Move cursor to previous field in the main log. |
| [Del] or [Ctrl][D] | Delete the character located under the cursor. |
| [F11] | Clear all the fields of the current QSO, and puts the cursor into the callsign logging field. |
| [Alt][W] | Clear QSO (like F11). |
| [Alt][F] | Edit QSO date and time. |
| [Alt][N] | Write a note regarding this QSO. |
| [Ctrl][W] | Clear the current field, if report field is cleared, initialize RST. |
| [Ctrl][Z] | Undo - restores edited QSO data to prior value (also menu:Edit->Restore_QSO). |
| [Ctrl][Left arrow] | Like [Home]. |
| [Ctrl][Right arrow] | Like [End]. |
| [Ctrl][+] or [Ctrl][Keypad Add] | Silently log QSO. |
| [Up arrow] | Move one QSO up. |
| [Down arrow] | Move one QSO down. |
| [PageUp] | Move 10 QSOs up. |
| [PageDown] | Move 10 QSOs down. |
| [Ctrl][G] | Go to a specific QSO number. |
| [Ctrl][Home] | Go to first QSO in log. |
| [Ctrl][End] | Go to last QSO in log. |
| [Ctrl][PageDown] | Go forward 24 hours. |
| [Ctrl][PageUp] | Go back 24 hours. |
| [Ctrl][X] | Toggles the X-QSO flag which invalidates the QSO, making it not count and export as X-QSO: line in Cabrillo. |
| [F1] | Play message #1. | CQ in Run. Callsign i S&P. |
| [Shift][Ctrl][F1] | In SO2V and SO2R: Shift focus to radio 1. Switch to Run. Play message #1. In SO1R and SO2R Advanced: Play message #1. |
Run F1 |
| [F2] | Play message #2. | Usually full report |
| [F3] | Play message #3. | Usually contest exchange e.g. serial number |
| [F4] | Play message #4. | Usually your call |
| [F5] | Play message #5. | Usually the logged callsign |
| [F6] | Play message #6. | Usually a request to repeat the exchange |
| [F7] | Play message #7. | Usually a single questionmark |
| [Insert] | Play the message defined for this key. | Usually the exchange |
| [+] or [Keypad Add] | Play the message defined for this key. | Usually conclusion and logging of QSO |
| [Esc] | Interrupt message transmission. | |
| [Alt][C] | Send or modify additional messages. | |
| [Alt][K] | Toggle Keyboard mode. | |
| [Ctrl][M] | Toggle ESM - Enter Sends Message. | |
| [Alt][V] | Change CW speed (opens "CW-Speed" entry box). | |
| [Alt][F9] | Decrease CW speed by 2 WPM. | |
| [Alt][F10] | Increase CW speed by 2 WPM. | |
| [Ctrl][F9] | Contest period down (for applicable contests). | |
| [Ctrl][F10] | Contest period up (for applicable contests). | |
| [Shift][F1..F7] | Record messages #1 to #7 (SSB, if supported for the active DVK) or edit message #1 to #7 (CW, Digital). | |
| [Shift][Insert] | Record the message associated to the [Insert] key. | |
| [Shift][+] | Records the message associated to the [+] key. | |
| [Ctrl][Tab] | Toggle Run/S&P mode for focused radio (also changes CW/Digi memory sets). | |
| [Shift][Ctrl][Tab] | Toggle Run/S&P mode for not focused radio (also changes CW/Digi memory sets). | |
| [Ctrl][R] | Toggle CQ auto-repeat. |
| [F8] | N + 1 window. |
| [F9] | Check call window. |
| [F10] | Check Multipliers window. |
| [F12] | Check Partials window. |
| [Alt][A] | DX-Cluster Announcements window. |
| [Alt][B] | Skeds window. |
| [Alt][E] | Take a sked. |
| [Alt][I] | Gab window. |
| [Alt][O] | DX-Cluster Monitor window. |
| [Alt][P] | Worked prefixes. |
| [Alt][R] | Rate window. |
| [Alt][S] | Summary window. |
| [Ctrl][F9] | Statistics window. |
| [Alt][F1] | QSY band down (In frequency, i.e. to a longer wavelength). |
| [Alt][F2] | QSY band up (In frequency, i.e. to a shorter wavelength). |
| [Alt][F4] | QSY back to CQ frequency. |
| [Ctrl][T] | Tune the transmitter (on CW). |
| [Ctrl][F1] and [Ctrl][F2] | Switch mode up and down (when the current contest permits). |
| [Shift][UpArrow] | RIT adjustment up in Run, frequency adjustment up in S&P, as defined by band map orientation. |
| [Shift][DownArrow] | RIT adjustment down in Run, frequency adjustment down in S&P, as defined by band map orientation. |
| [Shift][Delete] | RIT clear. |
| [Alt][UpArrow] | Frequency adjustment up as defined by band map orientation. |
| [Alt][DownArrow] | Frequency adjustment down as defined by band map orientation. |
| [Shift][Alt][UpArrow] | Faster VFO adjustment up as defined by band map orientation. |
| [Shift][Alt][DownArrow] | Faster VFO adjustment down as defined by band map orientation. |
| [Ctrl][-] or [Ctrl][Keypad Subtract] | Toggle receiver diversity/synchronization/tracking on supported radios. |
| [Ctrl][Alt][R] | Resets and reinitializes all serial port and pipe connections to radios, keyers, SO2R devices etc |
| [Keypad Multiply] | Switch active radio. |
| [-] or [Keypad Subtract] | Enable Split Mode. |
| [Shift][Ctrl][Alt][F1] | Select Rx antenna 1. |
| [Shift][Ctrl][Alt][F2] | Select Rx antenna 2. |
| [Shift][Ctrl][Alt][F3] | Select Rx antenna 3. |
| [Shift][Ctrl][Alt][F4] | Select Rx antenna 4. |
| [Shift][Ctrl][Alt][F5] | Select Rx antenna 5. |
| [Shift][Ctrl][Alt][F6] | Select Rx antenna 6. |
| [Shift][Ctrl][Alt][F7] | Select Rx antenna 7. |
| [Alt][F11] | Change RX antenna. |
| [Shift][Alt][F11] | Change TX antenna. |
| [Ctrl][F12] | Turn selected rotator to SP direction. |
| [Alt][F12] | Turn selected rotator to LP direction. |
| [Ctrl][Enter] | Insert spot into Band Map. |
| [Ctrl][Up arrow] | Grab the first spot above in the active bandmap and load it in VFO A in active radio (SO1R, SO2R) or active VFO (SO2V). |
| [Ctrl][Shift][Up arrow] | Grab the first spot, which is a multiplier, above in the active bandmap and load it in VFO A in active radio (SO1R, SO2R) or active VFO (SO2V). |
| [Ctrl][Alt][Up arrow] | With option Operating\Bandmap\QSY Opposite radio instead of 2nd VFO checked: Grab the first spot above in the active bandmap and load it in VFO A of other radio (SO1R, SO2R) or VFO B (SO2V). Otherwise: Grab the first spot above in the active bandmap and load it in VFO B in active radio (SO1R, SO2R, not applicable in SO2V). |
| [Ctrl][Down arrow] | Grab the first spot below in the active bandmap and load it in VFO A in active radio (SO1R, SO2R) or active VFO (SO2V). |
| [Ctrl][Shift][Down arrow] | Grab the first spot, which is a multiplier, below in the active bandmap and load it in VFO A in active radio (SO1R, SO2R) or active VFO (SO2V). |
| [Ctrl][Alt][Down arrow] | With option "Operating\Bandmap\QSY Opposite radio instead of 2nd VFO" checked: Grab the first spot below in the active bandmap and load it in VFO A of other radio (SO1R, SO2R) or VFO B (SO2V). Otherwise: Grab the first spot below in the active bandmap and load it in VFO B in active radio (SO1R, SO2R, not applicable in SO2V). |
| [Ctrl][Space] | Grab the spot on or near the current frequency. |
| [Ctrl] DoubleClick on a spot | Delete the spot without the warning window. |
| [Alt] DoubleClick on a spot | Load the sub VFO with a spot frequency (if applicable). |
| [Ctrl] DoubleClick on a spot | Delete the spot without the warning window. |
| [Alt] DoubleClick on a spot | Load the sub VFO with a spot frequency (if applicable). |
| [Alt][T] | Manually Send a spot or commands to the connected DX Cluster. |
| Networking and chat | [Alt][D] | Pass a station. |
| [Alt][G] | Send a gab. | |
| [Ctrl][Alt][G] | Send a ON4KST message. | |
| [Alt][I] | Open/Close Gab Window. | |
| [Alt][J] | Display status of all stations in the network. |
| [Ctrl][Alt][1..8] | Select scenario in SO2R Advanced. |
| [Ctrl][Shift][F1..F8] | On-the-fly scenario editing. |
| [Ctrl][Alt][A] | Listen to radio 1 in both ears in SO2R. |
| [Ctrl][Alt][T] | Listen to radio 2 in both ears in SO2R. |
| [Ctrl][Alt][S] | Toggle stereo in SO2R and SO2V with split. |
| [Ctrl][Alt][L] | Listen to focused radio in both ears in SO2R. |
| [Ctrl][Alt][D] | Toggle sub receiver permanently on in SO2V with split. |
| [Keypad Multiply] | Switch focus. |
| [Ctrl][F3] | Toggle station type (RUN/Mult in M/S, Run1/Run2 in M/2). |
| [Ctrl][O] | Login as operator. Erase entry text box to log off. |
| Contest recorder | [Ctrl][Alt][Enter] | Play QSO. |
| [Ctrl][Alt][Space] | Pause playback. |
| Partner Mode | [Comma] or [Keypad Decimal] | Manual addition of one or several calls to the partner window. |
| [Alt][Enter] | Add the call current call to the partner window. | |
| [Alt][Space] | Grab the call in the topmost "real time" line of the partner window. If empty, grab the top of the stack instead. | |
| [Alt][Backpace] | Clear everything in the partner window. | |
| [Alt][1] - [9] | Grab the nth call from the partner window. | |
| [Ctrl][1] - [9] | Replace the nth call in the partner window. | |
| DoubleClick on a callsign | Grab the call from the partner window. |
| [Alt][Y] | Grab the top guess in Check Partials window. |
| DoubleClick on a callsign | Grab the call. |
| Special Keys for WAE Contest | [Alt][L] | Open QTC RX window. |
| [Ctrl][L] | Open QTC TX window. | |
| [Ctrl][F8] | Equivalent to F8 "AGN" but includes row number. |
| [Ctrl][Alt][Page Up] | Morse Runner increase volume. |
| [Ctrl][Alt][Page Down] | Morse Runner decrease volume. |
| [Ctrl][Alt][Right Arrow] | Morse Runner increase bandwidth. |
| [Ctrl][Alt][Left Arrow] | Morse Runner decrease bandwidth. |
| [Ctrl][Shift][Right Arrow] | Morse Runner increase pitch. |
| [Ctrl][Shift][Left Arrow] | Morse Runner decrease pitch. |
| [Shift][UpArrow] | RIT + in Morse Runner. |
| [Shift][DownArrow] | RIT - in Morse Runner. |
| [Shift][Delete] | RIT clear in Morse Runner. |
NB. During MorseRunner operation, text command SETUP will open MorseRunner configuration panel.
Text commands
| CTSPACE | Equivalent to: Options | CW/DIGI | Shortened spaces (CT spaces) [checked] |
| CWAUTO or AUTOCW | Equivalent to: Options | CW/DIGI | Auto sending - Sets/disables autosending. |
| NOCTSPACE | Equivalent to: Options | CW/DIGI | Shortened spaces (CT spaces) [unchecked] |
| FULLABBREV | Equivalent to: Options | CW/DIGI | Serial number | Abbreviated |
| PROABBREV | Equivalent to: Options | CW/DIGI | Serial number | Pro |
| SEMIABBREV | Equivalent to: Options | CW/DIGI | Serial number | Half abbreviated |
| NOABBREV | Equivalent to: Options | CW/DIGI | Serial number | Not abbreviated |
| ESM or ESMON | Enable Enter Sends Message Mode; equivalent to: Tools | Data Entry | Enable ESM [checked] |
| NOESM or ESMOFF | Disable Enter Sends Message Mode; equivalent to: Tools | Data Entry | Enable ESM [unchecked] |
| LZ | Equivalent to: Options | CW/DIGI | Serial number | Leading zeros [checked] |
| NOLZ | Equivalent to: Options | CW/DIGI | Serial number | Leading zeros [unchecked] |
| MSGS or MESSAGES | Equivalent to: Options | CW/DIGI | Modify standard messages |
| RPT | Equivalent to: Tools | Repeat Loop [checked] |
| NORPT | Equivalent to: Tools | Repeat Loop [unchecked] |
| SOUND | Equivalent to: Options | CW/DIGI | No sound [unchecked] |
| NOSOUND | Equivalent to: Options | CW/DIGI | No sound [checked] |
| SYNCCW/NOSYNCCW | Enable/disable cw speed syncing between radio/VFO (SO2R and SO2V) |
| SYNCSPEED | Sync other radio/VFO CW speed with focused radio/VFO (SO2R and SO2V) |
| WKSETUP or WKEY | Equivalent to: Options | WinKey configuration |
| CW, SSB, LSB, USB, AM, FM | Set mode |
| WORKDUPE or WORKDUPEON | Equivalent to: Options | CW/DIGI | Work dupes [checked] The normal exchange will be sent also to dupes. |
| NOWORKDUPE or WORKDUPEOFF | Equivalent to: Options | CW/DIGI | Work dupes [unchecked] Causes the $QSOB4 message to be sent to all dupes when, for example, when the [Insert] key is programmed as $LOGGEDCALL $QSOB4 $GUESSEXCH $F2 |
| RUNSP or RUNSPON | Equivalent to: Tools | Data entry | Enable Run/SP switching [checked] |
| NORUNSP or RUNSPOFF | Equivalent to: Tools | Data entry | Enable Run/SP switching [unchecked] |
| AUTORSPON or AUTORSP | Equivalent to: Tools | Data entry | Enable automatic Run/SP selection [checked] |
| AUTORSPOFF or NOAUTRSP | Equivalent to: Tools | Data entry | Enable automatic Run/SP selection [unchecked] |
| MULT | Equivalent to: Commands | Station type | Mult |
| OPON or LOGIN | Log in as an operator |
| OPOFF or LOGOUT | Log out as an operator |
| RUN1 | Equivalent to: Commands | Station type | Run 1 |
| RUN2 | Equivalent to: Commands | Station type | Run 2 |
| RUN | Equivalent to: Commands | Station type | Run |
| AUTORELOAD | Equivalent to: Options | Load contest at startup [checked] |
| NOAUTORELOAD | Equivalent to: Options | Load contest at startup | [unchecked] |
| BYE or QUIT or EXIT | Equivalent to: File | Quit |
| CLEARLOG | Equivalent to: Edit | Delete all QSO |
| CLEARLOGNOW | Equivalent to: CLEARLOG, but does not ask for confirmation |
| CLOSE | Equivalent to: File | Close |
| COPYLOG | Save a copy of the current log file in the current log directory with a timestamp added to its name |
| COPYLOGCLEAR | Equivalent to the COPYLOG but with data truncation. Exact function is TBD. |
| NEW | Equivalent to: File | New |
| OPEN | Equivalent to: File | Open |
| POSTCONTEST | Equivalent to: Edit | Postcontest mode [checked] |
| NOPOSTCONTEST | Equivalent to: Edit | Postcontest mode [unchecked] |
| RELOAD or REOPEN | Reopens the current opened log |
| RELOADNOW or REOPENNOW | Reopens the current opened log, without the contest configuration dialog |
| WRITELOG or MAKELOG | Equivalent to: File | Creating log files - Create Cabrillo log file |
| CTYFILES or COUNTRYFILES | Equivalent to: Options | Data files | Country files |
| DEBUGCAT | Toggle debug logging of radio 1 CAT interface |
| DEBUGRCAT | For selected radio models read a simulated response from the radio as CAT communication from CATRX.bin file. |
| DEFINEKEYS | Equivalent to: Options | Redefine keyboard keys |
| VER or VERSION | Equivalent to: Help | About - Display the about panel |
| SETUP | Equivalent to: Options | Configure Interfaces During MorseRunner simulation it opens MorseRunner setup |
| NET or NETON/NONET or NETOFF | Enable/disable network communications |
| NETCONFIG | Equivalent to: Options | Configure network |
| ILOCK or ILOCKON | Enable DXLog software interlock |
| NOILOCK or ILOCKOFF | Disable DXLog software interlock |
| REMOTE | Equivalent to: Commands | Remote commands |
| RESET | Closes and re-opens serial port and pipe connections to radios, keyers, SO2R devices etc |
