Difference between revisions of "Menu Help"

From DXLog.net
Jump to navigation Jump to search
(Register)
(Release Notes)
Line 4: Line 4:
  
 
==Release Notes==
 
==Release Notes==
 +
 +
Ver 2.4.29
 +
------------------------
 +
  Fix Copy/Paste for radio 2 in SO2V and SO2R (K1XM, TNX SM7IUN)
 +
  Update EU HFC database. (SM7IUN, TNX VE2FK)
 +
  Update NAQP database. (SM7IUN, TNX VE2FK)
 +
  Add generic database USA-VE_db.txt for NA states/provinces. (SM7IUN, TNX VE2FK)
 +
  Update a number of contests to use new NA database. (SM7IUN)
 +
  If received QTC time has two digits use hours from previous QTC. (K1XM, TNX YT6W)
 +
  Be more consistent with folders in open/save dialogs. (SM7IUN)
 +
  Make contest list export comma-separated instead of tab-separated. (SM7IUN)
 +
  Improve SUM file export. (SM7IUN)
 +
  Don't crash if QTC is on non-contest band. (K1XM)
 +
  Ignore corrupted MP3 recording insted of crashing. (SM7IUN)
 +
  Catch unspecified recording device errors. (SM7IUN, TNX DL5AXX)
 +
  Set exact time when saving QSO or adding it to bandmap. (K1XM, TNX LZ5DB)
 +
  Add Tisza Cup. (SM7IUN)
 +
  Update CWT database. (SM7IUN, TNX VE2FK)
 +
  Fix issue with EDI export for contests without multipliers. (SM7IUN, TNX 9A5YY)
 +
 +
Ver 2.4.28
 +
------------------------
 +
  Only turn Elecraft sub on or off when necessary. (K1XM, TNX G4CLA)
 +
  Update IARU HQ database. (SM7IUN, TXN N6TV, OZ0J)
 +
  Update IRTS 2m/70cm Counties contest. (SM7IUN, TNX EI3JE)
 +
  Make Tools|Additional|Check zones work also for contests using ITU zone. (SM7IUN, TNX OH6XX)
 +
  Make parsing of telnet spots more robust to format variations. (SM7IUN, TNX PC3T)
 +
  Add option for not forwarding spots to client/server TCP networking. (SM7IUN, TNX OH6XX)
 +
  Update IOTA database. (SM7IUN, TNX VE2FK)
 +
  Update CWOps CWT database. (SM7IUN, TNX VE2FK)
 +
  Replace non-existent Cabrillo key CATEGORY-DXPEDITION with CATEGORY-LOCATION. (SM7IUN)
 +
  Make overlays that are station categories into CATEGORY-STATION in Cabrillo export. (SM7IUN, TNX OH6XX)
 +
  Add new CAT drivers for Yaesu FT-817ND, FT-818, FT-847, FT-857D, and FT-897. (SM7IUN, TNX K1XM)
 +
  Update SCC RTTY contest. (SM7IUN, TNX LB3RE)
 +
  Update EA database. (SM7IUN, TNX EA7A)
 +
  Update TS-990S driver. (SM7IUN, TU VU3ESV)
 +
  Sort display of worked HQ stations in alphabetical order for BSCC and IARU contests. (SM7IUN, TNX 5B4WN)
 +
  Add database to Portugal Day contest. (SM7IUN, TNX SP5KP)
 +
  New database for ARI DX and ARI 40/80 contests. (SM7IUN, TNX UR7QM, IZ1LBG)
 +
  New database for EU HF Championship. (SM7IUN, TNX VE2FK)
 +
  New database for PACC. (SM7IUN, TNX DL5JQ)
 +
  New database for REF. (SM7IUN, TNX VE2FK)
 +
  New databases for SP DX. (SM7IUN, TNX SP5KP)
 +
  New database for UBA. (SM7IUN, TNX VE2FK)
 +
  New database for SCC RTTY. (SM7IUN, TNX VE2FK)
 +
  New databases for YO DX. (SM7IUN, TNX SP5KP)
 +
  Update TS-590S and TS-890S drivers. (SM7IUN)
 +
  Update ELAD FDM-DUO driver. (SM7IUN)
 +
  Update ES Field Day contests. (SM7IUN, TNX ES7GM)
 +
  Fix multiple issues with EDI export. (SM7IUN, TNX ES7GM)
 +
  Don't crash on SPACE if RCVD field if part of signal report has been removed and RCVD is GRID. (SM7IUN)
 +
  Fix entry line points display for points type QRB when POINTS_BAND_BONUS key is used. (SM7IUN)
 +
  Fix entry line points display for points type QRB_EXCHANGE+CALCF and QRB+CALCF. (SM7IUN)
 +
  Fix ODX display in Rate window when POINTS_BAND_BONUS key is used. (SM7IUN)
 +
  Fix score calculation in European VHF contest. (SM7IUN)
 +
  Remove all occurences of the BAND_BONUS contest definition key. (SM7IUN)
 +
  Obey "Don't poll during TX" also when transmitting on "radio 2" in SO2V. (SM7IUN, TNX LZ5DB)
 +
  Don't crash when trying to load obsolete contest definition. (SM7IUN)
 +
  Update CQ WW VHF. (SM7IUN)
 +
  Make Rate window show best DX for Stew Perry. (SM7IUN)
 +
  Don't reserve serial number on Ctrl-Space spot grab. (SM7IUN, TNX LZ5DB)
 +
  Implement simple callsign copy/paste. (K1XM, TNX GW0ETF)
 +
  Make copying the hour from previous QTC optional. (K1XM, TNX YT6W)
 +
  Update NAQP database. (SM7IUN, TNX VE2FK)
 +
 +
Ver 2.4.27
 +
------------------------
 +
  Improve standard compliance for EDI export. (SM7IUN, TNX ES7GM)
 +
  Don't allow characters violating Cabrillo standard in contest configuration's list of operators. (SM7IUN)
 +
  Ensure standard compliance of operator list in Cabrillo export. (SM7IUN)
 +
  Include GRID-LOCATOR: key in Cabrillo export if grid is used by contest. (SM7IUN)
 +
  Update IARU database. (SM7IUN, TNX N6TV, OZ0J)
 +
  Update CWOps CWT database. (SM7IUN, TNX VE2FK)
 +
  Don't enable Cabrillo export menu item if contest does not support it. (SM7IUN)
 +
  Make MAKELOG/WRITELOG export EDI when applicable. (SM7IUN)
 +
  New database for Stew Perry contest. (SM7IUN, TNX VE2FK)
 +
  New database for Makrothen contest. (SM7IUN, TNX VE2FK)
 +
  Correctly recognize all supported microHAM keyers. (SM7IUN, TNX OH1TM)
 +
  Update Cabrillo export for CWT. (SM7IUN, TNX I2WIJ)
 +
  Fix issue with VFO selection on TS-590S. (SM7IUN, TNX LZ5DB)
 +
  Allow spot grabbing on other VFO while transmitting. (SM7IUN, TNX LZ5DB)
 +
 +
Ver 2.4.26
 +
------------------------
 +
  Fix mouse scroll in bandmap windows in list mode. (K1XM)
 +
  Add configuration key OFF_TIME_ROUND_UP. (SM7IUN)
 +
  Initialize external devices to R1R1 audio routing at startup. (SM7IUN)
 +
  Remove old drivers for Kenwood TS-590, TS-890, and TS-990. (SM7IUN)
 +
  Remove old drivers for FlexRadio. (SM7IUN)
 +
  Remove old drivers for Elecraft K3/K3S, KX3, and KX2. (SM7IUN)
 +
  Don't show SPLIT icon on wrong VFO when manually activated in SO2V. (SM7IUN)
 +
  Add menu option to make Alt-F1/F2 change band on both VFO of focused radio. (SM7IUN, TNX OH6XX)
 +
  Change 17m lower band limit to 18068. (SM7IUN)
 +
  Don't crash on double-click of QTC editor header. (K1XM, TNX DJ0MY)
 +
  Fix $WIPE macro. (SM7IUN)
 +
  Update CWOps CWT live score contest name and database. (SM7IUN)
 +
  Don't crash when editing an imported QSO with band or mode not allowed in contest. (SM7IUN)
 +
  Further corrections to on and off time calculations. (SM7IUN)
 +
  Update SMP to prefill with grid from previous QSO. (SM7IUN)
 +
  Fix issues with entry line display of QRB points and azimuth. (SM7IUN)
 +
  Increase live score server time-out to ten seconds and only report once at startup. (SM7IUN)
 +
  Change conflicting shortcut for setting pass frequency to Ctrl-Alt-P. (SM7IUN, TNX I2WIJ)
 +
  Fix crash with QTC receive and check partion or N+1 windows (K1XM, TNX IZ8JAI)
 +
  Don't start receiving QTCs if there is no callsign. (K1XM, TNX DM6DX)
 +
  Add points to QSO UDP broadcast. (SM7IUN, TNX SM5AJV)
 +
  Merge menu items for setting pass frequency into one single. (SM7IUN)
 +
  Make entering 0 as pass frequency unset it for the current band. (SM7IUN)
 +
  Don't use buttons for text in QTC send and receive windows. (K1XM)
 +
  UI improvements to Alt-D Pass station panel. (SM7IUN, TNX G4IRN)
 +
  Update Cabrillo export for All Asian. (SM7IUN, TNX KX7M)
 +
  Show QSY instead of SKED in QSY Wizard if HamCAP is not installed. (SM7IUN)
 +
  Update CWOps CWT database. (SM7IUN)
 +
  Update IARU HQ database. (SM7IUN, TNX N6TV, OZ0J)
 +
  Remove drivers for ICOM with obsolete firmware. (SM7IUN)
 +
  Add option to use FSK for RTTY with microHAM devices without CAT, such as u2R. (SM7IUN)
 +
  Add preliminary support for Elecraft K4. (SM7IUN, TNX N6TV)
 +
  Fix issue with context menu color picker. (SM7IUN)
 +
  Update IOTA database. (SM7IUN, TNX VE2FK)
 +
  Align the display of exchange in Check Partials and Check N+1. (SM7IUN)
 +
  Update RSGB HQP. (SM7IUN)
 +
 +
Ver 2.4.25
 +
------------------------
 +
  Don't crash opening DXC announcements window for contest with 6 meters. (K1XM, TNX SM7IUN)
 +
  Show inactive VFO in bandmap. (K1XM, TNX DL1MGB)
 +
  Add sort and scroll options to DXC announcements window. (K1XM)
 +
  Don't show Mult needed on other band if multipliers are not per-band. (K1XM)
 +
  Improved backwards compatibility for microHAM settings. (SM7IUN)
 +
  Fix issue with prompted operator logon at startup. (SM7IUN, TNX KX7M)
 +
  Put parenthesis around callsign for X-QSO to make them show also in contests without multipliers. (SM7IUN)
 +
  Make RELOAD and RELOADNOW also reinitialize contest definitions. (SM7IUN)
 +
  Fix issue with 6, 4, and 2m spots. (SM7IUN, TNX IV3SKB)
 +
  Fix issue with Cabrillo export for contests using EDI band naming. (SM7IUN)
 +
  Clear direction and points values when clearing entry line. (K1XM, TNX G4CLA)
 +
  Don't crash when automatically opening or closing MMVARI windows. (K1XM, TNX I2WIJ)
 +
  Update CWOps CWT database. (SM7IUN)
 +
  Update Cabrillo contest names for 11 contests based on https://contestcalendar.com/cabnames.php. (SM7IUN)
 +
  Update RSGB UKAC VHF/UHF/SHF contest. (SM7IUN)
 +
  Fix bandmap problems in list mode. (K1XM)
 +
  Handle damaged or wrong DXLog.net.config more gracefully. (SM7IUN, TNX KX7M)
 +
  Remove (non-functional) menu option for separate entry window in SO2R/SO2V. (SM7IUN)
 +
  Calculate on and off time more in line with contest rules. (SM7IUN, TNX K6MR)
 +
  Fix bandmap problem with grabbing next spot in list mode with complete spots (K1XM)
 +
 +
Ver 2.4.24
 +
------------------------
 +
  Update database for Ukrainian DX contests. (SM7IUN, TNX UR7QM)
 +
  Update Cabrillo export for EU PSK DX. (SM7IUN, TNX 9A5HZ)
 +
  Update CWOps CWT database. (SM7IUN, TNX VE2FK)
 +
  Fix handling of passwords in DXLog.net.DXC. (K1XM, TNX G3BJ)
 +
  Don't ignore incoming spots on 6m and up. (SM7IUN, TNX Z32ID)
 +
  Update to non-standard Cabrillo QSO mode acronyms for PSK in 19 contests. (SM7IUN)
 +
  Update CQ WPX and CQ WPX RTTY. (SM7IUN)
 +
  Don't include RST in bandmap's exchange display. (SM7IUN)
 +
  Improve LPT error handling. (K1XM, TNX RA3AUU)
 +
  Add support for rapid frequency changes from keyboard on TS-590, 890, and 990. (SM7IUN, TNX CT1ILT)
 +
  Make Shift-Ctrl-F1 act just as F1 in SO1R and SO2R Advanced. (SM7IUN)
 +
  Handle live score server failure responses much more gracefully. (SM7IUN)
 +
  Don't stop live score reporting if interfaces are reset or interface configuration is updated. (SM7IUN)
 +
  Fix issue with clicking at top of bandmap list view in SO2V. (SM7IUN)
 +
  Introduce timeout for live score server response to improve robustness. (SM7IUN)
 +
  Handle very large DX cluster spots file - don't crash. (K1XM)
 +
  More robust implementation of split enable/disable for Elecraft. (SM7IUN)
 +
  Update REF contest. (SM7IUN, TNX F6UGW)
 +
  Fix minor inconsistency with CAT PTT for CW. (SM7IUN)
 +
  Add option to control mode on microHAM keyers without CAT interface. (SM7IUN, TNX CT1ILT)
 +
  Fix problems with SO2V. (K1XM, TNX OH6XX)
 +
  Fix issue with interrupting a message with another message for microHAM DVK. (SM7IUN)
 +
  Add option to select DVK message bank with operator logon for microHAM. (SM7IUN, TNX CT1ILT)
 +
  Use "microHAM" instead of "MK2R/MK2R+/u2R" in settings and UI. (SM7IUN)
 +
  Let Radio Status window only show one radio in SO2V. (SM7IUN)
 +
  Performance improvements for bandmap and DXC announce windows. (K1XM)
 +
  Maximize station name to 15 characters in networking configuration panel. (SM7IUN)
 +
  Change N+1 algorithm and improve N+1 performance. (K1XM, TNX DL1MGB)
 +
 +
Ver 2.4.23
 +
------------------------
 +
  Add menu option to only use ESM for CW. (SM7IUN, TNX R9IR)
 +
  Fix Shift-Ctrl-Tab to correctly switch operating mode for other radio. (SM7IUN)
 +
  Update CQ-M. (SM7IUN, TNX M0CKE)
 +
  Update FlexRadio CAT driver. Old driver still available. (SM7IUN)
 +
  Add support for DAX control with FlexRadio. (SM7IUN)
 +
  Update CWOps CWT database. (SM7IUN, TNX VE2FK)
 +
  Update BERU. (M0CKE)
 +
  Ignore spot grabbing, mode change, and band change while transmitting. (SM7IUN, TNX SM5AJV)
 +
  Fix issue with DX cluster list in DXLog.net.DXC. (SM7IUN, TNX SM5AJV)
 +
  Update ES Open. (SM7IUN)
 +
  Fix issue with RCVD prefill treated as operator entered after grabbing a spot. (SM7IUN)
 +
  Make CALL and CALLSIGN content keys equivalent in regular expressions. (SM7IUN)
 +
  Update UKEICC 80m Summer. (SM7IUN, TNX G4BWP)
 +
  Add database for UN DX Contest. (SM7IUN, TNX SQ9S, SP5KP)
 +
  Minor corrections in Cabrillo export for 32 contests. (SM7IUN)
 +
  Fix custom forms. (K1XM, TNX CT1ILT)
 +
  Performance improvements for Operating info and Radio status windows. (K1XM)
 +
 +
Ver 2.4.22
 +
------------------------
 +
  Fix missing operator and station ID in lookupinfo message. (K1XM, TNX N0VD)
 +
  Update CWOps database and CWT contest. (SM7IUN)
 +
  Never ignore duplicate spots of own station's call in DXLog.net.DXC. (SM7IUN)
 +
  Update SSA Portabeltest. (SM7IUN, TNX SM5AJV)
 +
  Add contest configuration key CABRILLO_ASSISTED_DISABLED. (SM7IUN, TNX SM5AJV)
 +
  Update SMP. (SM7IUN, TNX SM5IMO, SM5AJV)
 +
  RCC database updated. (SM7IUN, TNX R9IR)
 +
  Implement second check partial window for SO2R and SO2V. (K1XM, TNX CT1BOH)
 +
  Update check partial and N+1 windows on focus change. (K1XM, TNX I2WIJ, SM5AJV)
 +
  Add contest configuration key FIELD_MULT_NAME. (SM7IUN, TNX M0CKE)
 +
  Add four and update one local OH contests. The old Viitosten Syysottelu mode specific contests need
 +
  manual removal if not a fresh install of DXLog. (SM7IUN, TNX OH6KZP)
 +
  Update SP DX RTTY. (SM7IUN, TNX EI3JE, SQ9S)
 +
  Implement second N+1 window for SO2R and SO2V. (K1XM, TNX CT1BOH)
 +
  Update Cabrillo names on 56 contests based on https://www.contestcalendar.com/cabnames.php. (SM7IUN, TNX WA7BNM)
 +
  Update AGCW database. (SM7IUN, TNX SQ9S)
 +
  Allow different color for worked stations and stations not in contest in bandmap. (K1XM, TNX W9PA)
 +
  Add option to show stations not in contest in DX cluster announcements. (K1XM, TNX W9PA)
 +
  Add option to get exchange from DX cluster comments in some contests. (K1XM)
 +
  Add option to put exchange information in spots by default. (K1XM)
 +
  Set first exchange field from bandmap or announcement windows. (K1XM)
 +
  Fix bug involving wrong exchange guessing from grabbed spot. (K1XM)
 +
  Add IAC VHF contest. (SM7IUN, TNX IK2JUB)
 +
  Add ability to set PTT when running MorseRunner simulations. (K1XM, TNX N6KI)
 +
  Update NRAU Baltic contest. (SM7IUN, TNX LB3RE)
 +
  Update 7QP, INQP, NEQP. (K1XM)
 +
  Update RCC CUP. (SM7IUN, TNX M0CKE)
 +
  Update IOTA. (SM7IUN, TNX SM5AJV)
 +
  Update IRTS Counties. (SM7IUN, TNX  EI3JE)
 +
  Add IRTS Counties V/UHF. (SM7IUN, TNX  EI3JE)
 +
  Disable ESM in post contest mode. (SM7IUN, TNX SM5AJV)
 +
 +
Ver 2.4.21
 +
------------------------
 +
  Fix crash with lookupinfo and empty callsign. (K1XM, TNX IK2NCJ)
 +
  Don't ignore cluster spot lines with "DX DE" in capital letters in DXLog.net.DXC. (SM7IUN)
 +
  AGCW Happy New Year contest updated. (SM7IUN, TNX G4BWP)
 +
  Add Samovar contest. (SM7IUN, TNX R9IR!)
 +
  Update DIG QSO Party database. (SM7IUN, TNX 9A1AA)
 +
  Update CWOps CWT database. (SM7IUN, TNX VE2FK)
 +
  Don't crash if callsign begins or ends with "/". (K1XM)
 +
  Update RSGB Hope QSO Party warning file. (SM7IUN, TNX G0FCT)
 +
  Add database for JIDX. (SM7IUN, TNX 5B4WN)
 +
  Remove SSB and Mixed categories from OK OM DX CW contest. (SM7IUN, TNX YU1EA)
 +
  Show digital mode menus when Mixed contest category allows digital mode. (SM7IUN, TNX Z33RW)
 +
  Update SSA MT database. (SM7IUN, TNX SM6BGA)
 +
  Make RSGB HQP RTTY a separate contest. (SM7IUN, TNX G4PIQ)
 +
  Send multiplier pass to radio with focus (K1XM, TNX YT6W)
 +
  Add key Shift-Ctrl-F1 that switch focus to Radio 1 and sends CQ. (SM7IUN, TNX OK2ZI)
 +
  Update SSA MT. (SM7IUN, TNX SM5AJV)
 +
  Make guiding text for key redefinition more clear. (SM7IUN)
 +
  Fix problems with key remapping, especially in keyboard mode. (K1XM)
 +
  Fix crash editing UTC time in post contest mode. (K1XM)
 +
  Add database for CQMM. (SM7IUN, TNX SQ9S)
 +
  Update Cabrillo contest name for UKEICC 80m Summer Series. (SM7IUN, TNX VA2WA)
 +
  Add option for key remap in QTC receive (K1XM, TNX DJ5MW)
 +
  Fix issue with exchange type GRID not working with QRB_EXCHANGE+CALCF key. (SM7IUN)
 +
  Add contest definition key QRB+CALCF. (SM7IUN)
 +
  Add SSA Portabeltest. (SM7IUN, TNX SM5AJV!)
 +
  Update ARI Sezione. (SM7IUN, TNX IK2JUB, IZ1IBG)
 +
  Update Wednesday mini-contest. (SM7IUN, TNX HA1YA)
 +
  Update YU DX contest. (SM7IUN, TNX HA1YA)
 +
  Update CQMM contest. (SM7IUN, TNX SQ9S)
 +
  Update and add database to Helvetia contest. (SM7IUN, TNX HB9DUR)
 +
  Update ARI DX contest. (SM7IUN, TNX IK2JUB, IZ1IBG)
 +
  Correctly tag X-QSO as ERROR in EDI export. (SM7IUN, TNX ES7GM)
 +
  Update ES ULL KV. (SM7IUN, TNX ES7GM)
 +
  Don't crash Worked Grid window if log contains invalid locators. (SM7IUN, TNX ES7GM)
 +
  Update NRAU Baltic contest. (SM7IUN)
 +
  Fix a few Contest Super Simulator problems. (K1XM, TNX SV1DPI)
 +
 +
Ver 2.4.20
 +
------------------------
 +
  Update CAT drivers for Kenwood TS-590S, TS-890S and TS-990S. Old drivers available as "... old". (SM7IUN)
 +
  Add PTT via CAT for Elecraft K3, K3S, KX3, and KX2. (SM7IUN)
 +
  Don't poll or force VFO focus on FTDX101D. (SM7IUN, TNX G4IRN)
 +
  Fix issue with sub receiver control in SO2V. (SM7IUN)
 +
  CWOps CWT database updated. (SM7IUN, TNX VE2FK)
 +
  SP DX contest updated with new data base. (SM7IUN, TNX SP5KP)
 +
  ARI Sezione contest updated. (SM7IUN)
 +
  RSGB Hope QSO Party added. (SM7IUN, TNX G0FCT)
 +
  BERU contest updated. (M0CKE)
 +
  NRAU NAC 10m contest updated. (SM7IUN, TNX SA6BET, SM5AJV)
 +
  Don't crash when trying EDI export of empty log. (SM7IUN)
 +
  Ignore X-QSO when determining band category in Cabrillo export. (SM7IUN, TNX SV1DPI)
 +
  Fix problems with UTC handling. (K1XM)
 +
  Don't allow VFO switching during transmit. (SM7IUN)
 +
  Don't allow SPLIT status change during transmit. (SM7IUN)
 +
  Implement QTC Editor window. (K1XM, TNX IK2PFL)
 +
  Add DVK support for OTRSP devices. (SM7IUN, TNX I4UFH)
 +
  Don't take focus from QTC window when a QSO is received from the network (K1XM, TNX LZ5VK)
 +
  Clear entry line when adding call to partner stack. (K1XM, TNX G4IRN)
 +
  Clean up of OTRSP configuration panel. (SM7IUN, TNX K1XM)
 +
  Updated warning file for UKEICC 80m contest. (SM7IUN)
 +
  UKEICC 80m Summer Series contest added. (SM7IUN)
 +
  Add lookupinfo broadcast to show callsign which has been entered but not logged. (K1XM, TNX N0VD)
 +
  Add stationqso to contactinfo broadcast. (K1XM, TNX N0VD)
  
 
Ver 2.4.19
 
Ver 2.4.19

Revision as of 16:43, 10 August 2020

About

Displays the about window

Release Notes

Ver 2.4.29


 Fix Copy/Paste for radio 2 in SO2V and SO2R (K1XM, TNX SM7IUN)
 Update EU HFC database. (SM7IUN, TNX VE2FK)
 Update NAQP database. (SM7IUN, TNX VE2FK)
 Add generic database USA-VE_db.txt for NA states/provinces. (SM7IUN, TNX VE2FK)
 Update a number of contests to use new NA database. (SM7IUN)
 If received QTC time has two digits use hours from previous QTC. (K1XM, TNX YT6W)
 Be more consistent with folders in open/save dialogs. (SM7IUN)
 Make contest list export comma-separated instead of tab-separated. (SM7IUN)
 Improve SUM file export. (SM7IUN)
 Don't crash if QTC is on non-contest band. (K1XM)
 Ignore corrupted MP3 recording insted of crashing. (SM7IUN)
 Catch unspecified recording device errors. (SM7IUN, TNX DL5AXX)
 Set exact time when saving QSO or adding it to bandmap. (K1XM, TNX LZ5DB)
 Add Tisza Cup. (SM7IUN)
 Update CWT database. (SM7IUN, TNX VE2FK)
 Fix issue with EDI export for contests without multipliers. (SM7IUN, TNX 9A5YY)

Ver 2.4.28


 Only turn Elecraft sub on or off when necessary. (K1XM, TNX G4CLA)
 Update IARU HQ database. (SM7IUN, TXN N6TV, OZ0J)
 Update IRTS 2m/70cm Counties contest. (SM7IUN, TNX EI3JE)
 Make Tools|Additional|Check zones work also for contests using ITU zone. (SM7IUN, TNX OH6XX)
 Make parsing of telnet spots more robust to format variations. (SM7IUN, TNX PC3T)
 Add option for not forwarding spots to client/server TCP networking. (SM7IUN, TNX OH6XX)
 Update IOTA database. (SM7IUN, TNX VE2FK)
 Update CWOps CWT database. (SM7IUN, TNX VE2FK)
 Replace non-existent Cabrillo key CATEGORY-DXPEDITION with CATEGORY-LOCATION. (SM7IUN)
 Make overlays that are station categories into CATEGORY-STATION in Cabrillo export. (SM7IUN, TNX OH6XX)
 Add new CAT drivers for Yaesu FT-817ND, FT-818, FT-847, FT-857D, and FT-897. (SM7IUN, TNX K1XM)
 Update SCC RTTY contest. (SM7IUN, TNX LB3RE)
 Update EA database. (SM7IUN, TNX EA7A)
 Update TS-990S driver. (SM7IUN, TU VU3ESV)
 Sort display of worked HQ stations in alphabetical order for BSCC and IARU contests. (SM7IUN, TNX 5B4WN)
 Add database to Portugal Day contest. (SM7IUN, TNX SP5KP)
 New database for ARI DX and ARI 40/80 contests. (SM7IUN, TNX UR7QM, IZ1LBG)
 New database for EU HF Championship. (SM7IUN, TNX VE2FK)
 New database for PACC. (SM7IUN, TNX DL5JQ)
 New database for REF. (SM7IUN, TNX VE2FK)
 New databases for SP DX. (SM7IUN, TNX SP5KP)
 New database for UBA. (SM7IUN, TNX VE2FK)
 New database for SCC RTTY. (SM7IUN, TNX VE2FK)
 New databases for YO DX. (SM7IUN, TNX SP5KP)
 Update TS-590S and TS-890S drivers. (SM7IUN)
 Update ELAD FDM-DUO driver. (SM7IUN)
 Update ES Field Day contests. (SM7IUN, TNX ES7GM)
 Fix multiple issues with EDI export. (SM7IUN, TNX ES7GM)
 Don't crash on SPACE if RCVD field if part of signal report has been removed and RCVD is GRID. (SM7IUN)
 Fix entry line points display for points type QRB when POINTS_BAND_BONUS key is used. (SM7IUN)
 Fix entry line points display for points type QRB_EXCHANGE+CALCF and QRB+CALCF. (SM7IUN)
 Fix ODX display in Rate window when POINTS_BAND_BONUS key is used. (SM7IUN)
 Fix score calculation in European VHF contest. (SM7IUN)
 Remove all occurences of the BAND_BONUS contest definition key. (SM7IUN)
 Obey "Don't poll during TX" also when transmitting on "radio 2" in SO2V. (SM7IUN, TNX LZ5DB)
 Don't crash when trying to load obsolete contest definition. (SM7IUN)
 Update CQ WW VHF. (SM7IUN)
 Make Rate window show best DX for Stew Perry. (SM7IUN)
 Don't reserve serial number on Ctrl-Space spot grab. (SM7IUN, TNX LZ5DB)
 Implement simple callsign copy/paste. (K1XM, TNX GW0ETF)
 Make copying the hour from previous QTC optional. (K1XM, TNX YT6W)
 Update NAQP database. (SM7IUN, TNX VE2FK)

Ver 2.4.27


 Improve standard compliance for EDI export. (SM7IUN, TNX ES7GM)
 Don't allow characters violating Cabrillo standard in contest configuration's list of operators. (SM7IUN)
 Ensure standard compliance of operator list in Cabrillo export. (SM7IUN)
 Include GRID-LOCATOR: key in Cabrillo export if grid is used by contest. (SM7IUN)
 Update IARU database. (SM7IUN, TNX N6TV, OZ0J)
 Update CWOps CWT database. (SM7IUN, TNX VE2FK)
 Don't enable Cabrillo export menu item if contest does not support it. (SM7IUN)
 Make MAKELOG/WRITELOG export EDI when applicable. (SM7IUN)
 New database for Stew Perry contest. (SM7IUN, TNX VE2FK)
 New database for Makrothen contest. (SM7IUN, TNX VE2FK)
 Correctly recognize all supported microHAM keyers. (SM7IUN, TNX OH1TM)
 Update Cabrillo export for CWT. (SM7IUN, TNX I2WIJ)
 Fix issue with VFO selection on TS-590S. (SM7IUN, TNX LZ5DB)
 Allow spot grabbing on other VFO while transmitting. (SM7IUN, TNX LZ5DB)

Ver 2.4.26


 Fix mouse scroll in bandmap windows in list mode. (K1XM)
 Add configuration key OFF_TIME_ROUND_UP. (SM7IUN)
 Initialize external devices to R1R1 audio routing at startup. (SM7IUN)
 Remove old drivers for Kenwood TS-590, TS-890, and TS-990. (SM7IUN)
 Remove old drivers for FlexRadio. (SM7IUN)
 Remove old drivers for Elecraft K3/K3S, KX3, and KX2. (SM7IUN)
 Don't show SPLIT icon on wrong VFO when manually activated in SO2V. (SM7IUN)
 Add menu option to make Alt-F1/F2 change band on both VFO of focused radio. (SM7IUN, TNX OH6XX)
 Change 17m lower band limit to 18068. (SM7IUN)
 Don't crash on double-click of QTC editor header. (K1XM, TNX DJ0MY)
 Fix $WIPE macro. (SM7IUN)
 Update CWOps CWT live score contest name and database. (SM7IUN)
 Don't crash when editing an imported QSO with band or mode not allowed in contest. (SM7IUN)
 Further corrections to on and off time calculations. (SM7IUN)
 Update SMP to prefill with grid from previous QSO. (SM7IUN)
 Fix issues with entry line display of QRB points and azimuth. (SM7IUN)
 Increase live score server time-out to ten seconds and only report once at startup. (SM7IUN)
 Change conflicting shortcut for setting pass frequency to Ctrl-Alt-P. (SM7IUN, TNX I2WIJ)
 Fix crash with QTC receive and check partion or N+1 windows (K1XM, TNX IZ8JAI)
 Don't start receiving QTCs if there is no callsign. (K1XM, TNX DM6DX)
 Add points to QSO UDP broadcast. (SM7IUN, TNX SM5AJV)
 Merge menu items for setting pass frequency into one single. (SM7IUN)
 Make entering 0 as pass frequency unset it for the current band. (SM7IUN)
 Don't use buttons for text in QTC send and receive windows. (K1XM)
 UI improvements to Alt-D Pass station panel. (SM7IUN, TNX G4IRN)
 Update Cabrillo export for All Asian. (SM7IUN, TNX KX7M)
 Show QSY instead of SKED in QSY Wizard if HamCAP is not installed. (SM7IUN)
 Update CWOps CWT database. (SM7IUN)
 Update IARU HQ database. (SM7IUN, TNX N6TV, OZ0J)
 Remove drivers for ICOM with obsolete firmware. (SM7IUN)
 Add option to use FSK for RTTY with microHAM devices without CAT, such as u2R. (SM7IUN)
 Add preliminary support for Elecraft K4. (SM7IUN, TNX N6TV)
 Fix issue with context menu color picker. (SM7IUN)
 Update IOTA database. (SM7IUN, TNX VE2FK)
 Align the display of exchange in Check Partials and Check N+1. (SM7IUN)
 Update RSGB HQP. (SM7IUN)

Ver 2.4.25


 Don't crash opening DXC announcements window for contest with 6 meters. (K1XM, TNX SM7IUN)
 Show inactive VFO in bandmap. (K1XM, TNX DL1MGB)
 Add sort and scroll options to DXC announcements window. (K1XM)
 Don't show Mult needed on other band if multipliers are not per-band. (K1XM)
 Improved backwards compatibility for microHAM settings. (SM7IUN)
 Fix issue with prompted operator logon at startup. (SM7IUN, TNX KX7M)
 Put parenthesis around callsign for X-QSO to make them show also in contests without multipliers. (SM7IUN)
 Make RELOAD and RELOADNOW also reinitialize contest definitions. (SM7IUN)
 Fix issue with 6, 4, and 2m spots. (SM7IUN, TNX IV3SKB)
 Fix issue with Cabrillo export for contests using EDI band naming. (SM7IUN)
 Clear direction and points values when clearing entry line. (K1XM, TNX G4CLA)
 Don't crash when automatically opening or closing MMVARI windows. (K1XM, TNX I2WIJ)
 Update CWOps CWT database. (SM7IUN)
 Update Cabrillo contest names for 11 contests based on https://contestcalendar.com/cabnames.php. (SM7IUN)
 Update RSGB UKAC VHF/UHF/SHF contest. (SM7IUN)
 Fix bandmap problems in list mode. (K1XM)
 Handle damaged or wrong DXLog.net.config more gracefully. (SM7IUN, TNX KX7M)
 Remove (non-functional) menu option for separate entry window in SO2R/SO2V. (SM7IUN)
 Calculate on and off time more in line with contest rules. (SM7IUN, TNX K6MR)
 Fix bandmap problem with grabbing next spot in list mode with complete spots (K1XM)

Ver 2.4.24


 Update database for Ukrainian DX contests. (SM7IUN, TNX UR7QM)
 Update Cabrillo export for EU PSK DX. (SM7IUN, TNX 9A5HZ)
 Update CWOps CWT database. (SM7IUN, TNX VE2FK)
 Fix handling of passwords in DXLog.net.DXC. (K1XM, TNX G3BJ)
 Don't ignore incoming spots on 6m and up. (SM7IUN, TNX Z32ID)
 Update to non-standard Cabrillo QSO mode acronyms for PSK in 19 contests. (SM7IUN)
 Update CQ WPX and CQ WPX RTTY. (SM7IUN)
 Don't include RST in bandmap's exchange display. (SM7IUN)
 Improve LPT error handling. (K1XM, TNX RA3AUU)
 Add support for rapid frequency changes from keyboard on TS-590, 890, and 990. (SM7IUN, TNX CT1ILT)
 Make Shift-Ctrl-F1 act just as F1 in SO1R and SO2R Advanced. (SM7IUN)
 Handle live score server failure responses much more gracefully. (SM7IUN)
 Don't stop live score reporting if interfaces are reset or interface configuration is updated. (SM7IUN)
 Fix issue with clicking at top of bandmap list view in SO2V. (SM7IUN)
 Introduce timeout for live score server response to improve robustness. (SM7IUN)
 Handle very large DX cluster spots file - don't crash. (K1XM)
 More robust implementation of split enable/disable for Elecraft. (SM7IUN)
 Update REF contest. (SM7IUN, TNX F6UGW)
 Fix minor inconsistency with CAT PTT for CW. (SM7IUN)
 Add option to control mode on microHAM keyers without CAT interface. (SM7IUN, TNX CT1ILT)
 Fix problems with SO2V. (K1XM, TNX OH6XX)
 Fix issue with interrupting a message with another message for microHAM DVK. (SM7IUN)
 Add option to select DVK message bank with operator logon for microHAM. (SM7IUN, TNX CT1ILT)
 Use "microHAM" instead of "MK2R/MK2R+/u2R" in settings and UI. (SM7IUN)
 Let Radio Status window only show one radio in SO2V. (SM7IUN)
 Performance improvements for bandmap and DXC announce windows. (K1XM)
 Maximize station name to 15 characters in networking configuration panel. (SM7IUN)
 Change N+1 algorithm and improve N+1 performance. (K1XM, TNX DL1MGB)

Ver 2.4.23


 Add menu option to only use ESM for CW. (SM7IUN, TNX R9IR)
 Fix Shift-Ctrl-Tab to correctly switch operating mode for other radio. (SM7IUN)
 Update CQ-M. (SM7IUN, TNX M0CKE)
 Update FlexRadio CAT driver. Old driver still available. (SM7IUN)
 Add support for DAX control with FlexRadio. (SM7IUN)
 Update CWOps CWT database. (SM7IUN, TNX VE2FK)
 Update BERU. (M0CKE)
 Ignore spot grabbing, mode change, and band change while transmitting. (SM7IUN, TNX SM5AJV)
 Fix issue with DX cluster list in DXLog.net.DXC. (SM7IUN, TNX SM5AJV)
 Update ES Open. (SM7IUN)
 Fix issue with RCVD prefill treated as operator entered after grabbing a spot. (SM7IUN)
 Make CALL and CALLSIGN content keys equivalent in regular expressions. (SM7IUN)
 Update UKEICC 80m Summer. (SM7IUN, TNX G4BWP)
 Add database for UN DX Contest. (SM7IUN, TNX SQ9S, SP5KP)
 Minor corrections in Cabrillo export for 32 contests. (SM7IUN)
 Fix custom forms. (K1XM, TNX CT1ILT)
 Performance improvements for Operating info and Radio status windows. (K1XM)

Ver 2.4.22


 Fix missing operator and station ID in lookupinfo message. (K1XM, TNX N0VD)
 Update CWOps database and CWT contest. (SM7IUN)
 Never ignore duplicate spots of own station's call in DXLog.net.DXC. (SM7IUN)
 Update SSA Portabeltest. (SM7IUN, TNX SM5AJV)
 Add contest configuration key CABRILLO_ASSISTED_DISABLED. (SM7IUN, TNX SM5AJV)
 Update SMP. (SM7IUN, TNX SM5IMO, SM5AJV)
 RCC database updated. (SM7IUN, TNX R9IR)
 Implement second check partial window for SO2R and SO2V. (K1XM, TNX CT1BOH)
 Update check partial and N+1 windows on focus change. (K1XM, TNX I2WIJ, SM5AJV)
 Add contest configuration key FIELD_MULT_NAME. (SM7IUN, TNX M0CKE)
 Add four and update one local OH contests. The old Viitosten Syysottelu mode specific contests need 
 manual removal if not a fresh install of DXLog. (SM7IUN, TNX OH6KZP)
 Update SP DX RTTY. (SM7IUN, TNX EI3JE, SQ9S)
 Implement second N+1 window for SO2R and SO2V. (K1XM, TNX CT1BOH)
 Update Cabrillo names on 56 contests based on https://www.contestcalendar.com/cabnames.php. (SM7IUN, TNX WA7BNM)
 Update AGCW database. (SM7IUN, TNX SQ9S)
 Allow different color for worked stations and stations not in contest in bandmap. (K1XM, TNX W9PA)
 Add option to show stations not in contest in DX cluster announcements. (K1XM, TNX W9PA)
 Add option to get exchange from DX cluster comments in some contests. (K1XM)
 Add option to put exchange information in spots by default. (K1XM)
 Set first exchange field from bandmap or announcement windows. (K1XM)
 Fix bug involving wrong exchange guessing from grabbed spot. (K1XM)
 Add IAC VHF contest. (SM7IUN, TNX IK2JUB)
 Add ability to set PTT when running MorseRunner simulations. (K1XM, TNX N6KI)
 Update NRAU Baltic contest. (SM7IUN, TNX LB3RE)
 Update 7QP, INQP, NEQP. (K1XM)
 Update RCC CUP. (SM7IUN, TNX M0CKE)
 Update IOTA. (SM7IUN, TNX SM5AJV)
 Update IRTS Counties. (SM7IUN, TNX  EI3JE)
 Add IRTS Counties V/UHF. (SM7IUN, TNX  EI3JE)
 Disable ESM in post contest mode. (SM7IUN, TNX SM5AJV)

Ver 2.4.21


 Fix crash with lookupinfo and empty callsign. (K1XM, TNX IK2NCJ)
 Don't ignore cluster spot lines with "DX DE" in capital letters in DXLog.net.DXC. (SM7IUN)
 AGCW Happy New Year contest updated. (SM7IUN, TNX G4BWP)
 Add Samovar contest. (SM7IUN, TNX R9IR!)
 Update DIG QSO Party database. (SM7IUN, TNX 9A1AA)
 Update CWOps CWT database. (SM7IUN, TNX VE2FK)
 Don't crash if callsign begins or ends with "/". (K1XM)
 Update RSGB Hope QSO Party warning file. (SM7IUN, TNX G0FCT)
 Add database for JIDX. (SM7IUN, TNX 5B4WN)
 Remove SSB and Mixed categories from OK OM DX CW contest. (SM7IUN, TNX YU1EA)
 Show digital mode menus when Mixed contest category allows digital mode. (SM7IUN, TNX Z33RW)
 Update SSA MT database. (SM7IUN, TNX SM6BGA)
 Make RSGB HQP RTTY a separate contest. (SM7IUN, TNX G4PIQ)
 Send multiplier pass to radio with focus (K1XM, TNX YT6W)
 Add key Shift-Ctrl-F1 that switch focus to Radio 1 and sends CQ. (SM7IUN, TNX OK2ZI)
 Update SSA MT. (SM7IUN, TNX SM5AJV)
 Make guiding text for key redefinition more clear. (SM7IUN)
 Fix problems with key remapping, especially in keyboard mode. (K1XM)
 Fix crash editing UTC time in post contest mode. (K1XM)
 Add database for CQMM. (SM7IUN, TNX SQ9S)
 Update Cabrillo contest name for UKEICC 80m Summer Series. (SM7IUN, TNX VA2WA)
 Add option for key remap in QTC receive (K1XM, TNX DJ5MW)
 Fix issue with exchange type GRID not working with QRB_EXCHANGE+CALCF key. (SM7IUN)
 Add contest definition key QRB+CALCF. (SM7IUN)
 Add SSA Portabeltest. (SM7IUN, TNX SM5AJV!)
 Update ARI Sezione. (SM7IUN, TNX IK2JUB, IZ1IBG)
 Update Wednesday mini-contest. (SM7IUN, TNX HA1YA)
 Update YU DX contest. (SM7IUN, TNX HA1YA)
 Update CQMM contest. (SM7IUN, TNX SQ9S)
 Update and add database to Helvetia contest. (SM7IUN, TNX HB9DUR)
 Update ARI DX contest. (SM7IUN, TNX IK2JUB, IZ1IBG)
 Correctly tag X-QSO as ERROR in EDI export. (SM7IUN, TNX ES7GM)
 Update ES ULL KV. (SM7IUN, TNX ES7GM)
 Don't crash Worked Grid window if log contains invalid locators. (SM7IUN, TNX ES7GM)
 Update NRAU Baltic contest. (SM7IUN)
 Fix a few Contest Super Simulator problems. (K1XM, TNX SV1DPI)

Ver 2.4.20


 Update CAT drivers for Kenwood TS-590S, TS-890S and TS-990S. Old drivers available as "... old". (SM7IUN)
 Add PTT via CAT for Elecraft K3, K3S, KX3, and KX2. (SM7IUN)
 Don't poll or force VFO focus on FTDX101D. (SM7IUN, TNX G4IRN)
 Fix issue with sub receiver control in SO2V. (SM7IUN)
 CWOps CWT database updated. (SM7IUN, TNX VE2FK)
 SP DX contest updated with new data base. (SM7IUN, TNX SP5KP)
 ARI Sezione contest updated. (SM7IUN)
 RSGB Hope QSO Party added. (SM7IUN, TNX G0FCT)
 BERU contest updated. (M0CKE)
 NRAU NAC 10m contest updated. (SM7IUN, TNX SA6BET, SM5AJV)
 Don't crash when trying EDI export of empty log. (SM7IUN)
 Ignore X-QSO when determining band category in Cabrillo export. (SM7IUN, TNX SV1DPI)
 Fix problems with UTC handling. (K1XM)
 Don't allow VFO switching during transmit. (SM7IUN)
 Don't allow SPLIT status change during transmit. (SM7IUN)
 Implement QTC Editor window. (K1XM, TNX IK2PFL)
 Add DVK support for OTRSP devices. (SM7IUN, TNX I4UFH)
 Don't take focus from QTC window when a QSO is received from the network (K1XM, TNX LZ5VK)
 Clear entry line when adding call to partner stack. (K1XM, TNX G4IRN)
 Clean up of OTRSP configuration panel. (SM7IUN, TNX K1XM)
 Updated warning file for UKEICC 80m contest. (SM7IUN)
 UKEICC 80m Summer Series contest added. (SM7IUN)
 Add lookupinfo broadcast to show callsign which has been entered but not logged. (K1XM, TNX N0VD)
 Add stationqso to contactinfo broadcast. (K1XM, TNX N0VD)

Ver 2.4.19


 Rework clock window and QSO entry timers so they change on the second. (K1XM)
 Rework ten minute rule timer so it does not skip counts or show zero seconds left. (K1XM)
 Fix ten minute rule time computation errors. (K1XM)
 Improve ten minute rule calculation speed. (K1XM)
 Implement band change rule countdown in Status window. (K1XM)
 Implement Show different active QSO line color for band change rule. (K1XM)
 Fix errors calculating band changes in rate window. (K1XM)
 Make status countdown and color change work when networking is turned off. (K1XM)
 Reset rate window band changes at the beginning of each hour. (K1XM)
 Use fast rate calculation method more often. (K1XM)
 Don't crash if network parameters are changed when no log is open (K1XM)
 Updated the regex Oblast guessing file used by many contests. (SM7IUN, TNX R9IR)
 Add single-click option to DX cluster announce window. (K1XM, TNX IK4ZGO)
 RDXC contest updated. (SM7IUN)
 CWOps data base updated. (SM7IUN)
 Show station type in entry line (K1XM, TNX SM7IUN)
 BARTG HF corrected. (SM7IUN, TNX OK2PMU)
 Don't overwrite DX cluster list if it has been edited. (K1XM, TNX HA1YA)
 Fix Ctrl-F3 to only switch to valid station types. (K1XM, TNX SM7IUN)
 Don't crash if some QTCs are sent and the default is selected to send more. (K1XM, TNX R9IR)
 Save the window positions of the QTC send and receive windows. (K1XM)
 Escape cancels transmit when sending QTCs. (K1XM)
 Up and Down arrows move between QSOs when receiving QTCs. (K1XM)
 Clearer wording in Bandmap's context menu. (SM7IUN, TNX N2NT)
 Added many text commands as tool-tips in menus. (SM7IUN)
 Vidovdan contest updated. (SM7IUN)
 OK1WC Memorial HF contest updated. (SM7IUN)
 Validate callsign characters in received QTCs. (K1XM)
 Recognize and use CT1BOH skimmer spot validation information when present in cluster feed. (SM7IUN)
 Add Alt-V (CW speed), Alt-S (Save), Ctrl-L or Alt-L (cancel), Shift-+ (same as +) to QTC forms. (K1XM)
 Don't ignore cluster spot lines with "DX DE" in capital letters. (SM7IUN)
 Improve performance and fix a bug in SCP and N+1 callsign handling. (K1XM)
 WAE contest updated with frequency warnings. (SM7IUN)
 Fix issue with DXCC/location for slashed single letter prefix calls like R9JA/4 and K2MM/6. (SM7IUN)
 FOC database updated. (SM7IUN, TNX RM2D)
 Fix issue with DXLog assuming /AM and /MM stations to be their base DXCC. (SM7IUN, TNX I2WIJ)
 Fix to correctly ignore /AE, /AG, and /KT suffixes. (SM7IUN)
 FOC BW updated. (SM7IUN)
 Introduce VFO focus and sub recevier control in SO2V with SPLIT for dual receiver ICOM, Yaesu FTDX101D, and Elecraft. More information in wiki. (SM7IUN)
 Increase radio switching delay in SO2R from 10 to 25ms to support slower SO2R controllers. (SM7IUN)
 Change radio code so it updates the bandmap frequency more reliably. (K1XM, TNX W9PA)
 Correct data base file type in a number of local ES contests. (SM7IUN)
 Fix DTB_SCP_FROM_RECINFO contest definition key. (SM7IUN)
 Add contest definition key DB_SCP_FROM_EXCHANGE for reverse look-up in pre-fill database. More information in wiki. (SM7IUN)

Ver 2.4.18


 UKEIDX contest and data base updated. (M0CKE, SM7IUN)
 Fixed issue with frequency range warnings not working with spot grabbing. (SM7IUN)
 Fixed issue with multiplier alert for other bands not appearing directly. (SM7IUN)
 Fixed issue that cleared multiplier alert when using F-keys. (SM7IUN)
 RSGB UKAC V/U/SHF contest updated. (SM7IUN, TNX G4CLA)
 REF contest corrected. (M0CKE, TNX CT1ILT)
 YO PSK31 contest corrected. For non-YO stations, do not log received DXCC prefix. (SM7IUN)
 Removed key FIELD_RECINFO_EXC_CHECK_DXCC from a number of contests since it does not exist. (SM7IUN)
 HSC Contest updated. (M0CKE, TNX DL5JQ)
 Disable network if the callsign doesn't match that of other stations. (K1XM, TNX G4IRN)
 Added localhost to default list of DX cluster nodes. (SM7IUN, TNX I2WIJ)
 RSGB Commonwealth contest (aka BERU) added. (M0CKE, TNX G4IRN)
 Fixed issue with internal DVK in FTDX101D. (SM7IUN, TNX OH6MJM & G4IRN)
 Swiss V/U/SHF Activity contest added. (M0CKE)
 UBA contest corrected. (SM7IUN, TNX HA1YA)
 NRAU NAC Monthly V/U/SHF contest added. (SM7IUN, TNX SM7EQL)
 Corrected EDI band names for 2m and 70cm for a number of V/U/SHF contests. (SM7IUN)
 CWOps CWT updated with categories and overlay from 3830. (SM7IUN)
 CWOps data base updated. (SM7IUN)
 National SM contest SL-Testen added. (SM7IUN, TNX SM5AJV)
 Date changed to ISO format in header of exported ADIF. (SM7IUN)
 IRTS HF Counties contest updated. (SM7IUN)
 RSGB CC 80m contest updated to 2020 rules. (SM7IUN)
 Grey out CI-V address entry box text in radio setup panel if radio is not ICOM. (SM7IUN)
 RSGB IOTA contest updated. (SM7IUN)
 Web addresses updated on two dozen contests. (SM7IUN)
 Tesla Memorial HF contest updated with 2020 rules. (SM7IUN, TNX YT3W)
 Updated Cabrillo and Live Score reporting names for a number of contests. (SM7IUN)

Ver 2.4.17


 Default country files and super check partial database updated. (SM7IUN)
 Add per-band transverter offsets. (K1XM, TNX HA1YA)
 Corrected information element headings in data base configuration panel. (SM7IUN)
 UI improvements to microHAM and OTRSP configuration panels. (SM7IUN)
 Added 60m band to default set up of OTRSP configuration panel. Requires clicking RESET. (SM7IUN)
 Download country files using secure https connection. (K1XM, TNX AD1C)
 Set callsign and contest in Contest Super Simulator if V1.15 or later (K1XM, TNX W5XD)
 CWOps data base updated. (SM7IUN)
 Add missing VLF, VHF, UHF, and SHF known bands through 24 GHz. (K1XM)
 Disable country file downloads if TLS 1.2 is not available. (K1XM, TNX I2WIJ)
 Keypad * will swap VFOs in SO1R. (K1XM, TNX SM7IUN)
 Change default microwave frequencies. (K1XM, TNX HA1YA)
 Interlock with microHAM keyers now supports paddle transmission with breakin. Requires microHAM device router version 9.3.0 or later. (SM7IUN, TNX OM7ZZ)
 Added option to include X-QSO or not in ADIF export. (SM7IUN)
 Added ADIF key APP_DXLOG_XQSO to preserve X-QSO status with import/export. (SM7IUN)
 Removed old transverter offsets [INCOMPATIBLE CHANGE].  (K1XM)
 Add ability to stop EA4TX ARCVCOM rotator. (K1XM)
 Updated ARRL DX to include state in ADIF export for VE/K stations. (SM7IUN)
 Added shortcut key Ctrl-R to toggle CQ auto-repeat. (SM7IUN)
 Added option to select sample rate and coding rate for Contest Recorder. (SM7IUN)
 Add Always on top option for Ham CAP. (K1XM, TNX VU2PTT)
 Don't crash if network is enabled but computer has no network. (K1XM, TNX N2NT)
 Fixed issue with title bar color on e.g. Contest Recorder sometimes being reset. (SM7IUN)
 Some improper and dead cluster nodes removed from DXC Connection list. (SM7IUN)
 Overlapping and partial prefill data bases are now supported. If more than one match is found, the prefill from the database with the lowest number is used. (SM7IUN)
 The exchange guessing time-out is reduced to a more practical 0.5s. (SM7IUN)
 EURASIA HF Championship added. (SM7IUN, TNX R9IR)
 Cabrillo export for FOC Marathon corrected. (SM7IUN)
 The formatting of displayed prefill data in Check Partials window is improved. (SM7IUN)
 Remove queue which was not properly locked. (K1XM, TNX CT1ILT)
 Added RHOB and URH local HA contests. (SM7IUN, TNX HA1YA)
 Don't crash if live score is turned off. (K1XM, TNX CT1ILT)
 SSM MT database updated. (SM7IUN)
 Don't require an antenna switch device for EA4TX rotator. (K1XM)
 CQ160 database updated. (SM7IUN)
 NAQP database updated. (SM7IUN)
 Don't activate repeat loop if the set up dialog box is canceled. (SM7IUN)

Ver 2.4.16


 Fix problem which causes DXLog to not quit if no file is open. (K1XM, SM7IUN)

Ver 2.4.15


 FOC Marathon updated. (M0CKE)
 CWOps CWT updated to accept participant names up to 10 characters long. (SM7IUN, TNX K1XM)
 HB Field Day and RSGB 21/28MHz contest added. (SM7IUN)
 Default band map settings updated. (SM7IUN)
 Don't update country file if download failed. (K1XM, TNX OE1CIW)
 Improve error handling for SCP download. (K1XM)
 Fixed issue where CQ prevention for MULT station interfered with ESM. (SM7IUN)
 Fixed issues preventing live score reporting in multiple contests, including BARTG SPRINT. (SM7IUN)
 Fixed errors in generated Cabrillo in multiple contests, including BARTG SPRINT. (SM7IUN)
 Made the Cabrillo mode for PSK QSO according to standard (i.e. "DG") in multiple contests. (SM7IUN)
 RSGB AFS Data contest added. (SM7IUN)
 Minimum off times corrected for WAE, CQ 160, CQ WW RTTY, and CQ WPX. (SM7IUN)
 Add IF Frequency to radio information broadcast, K3 only for now. (K1XM, TNX N2NT)
 Default minimum off time is now 30 minutes which is the de-facto standard. (SM7IUN)
 Clean up radio information broadcast. (K1XM, TNX SM7IUN)
 Added keyboard shortcut Ctrl-O for operator log in. (SM7IUN)
 CWops data base updated. (SM7IUN)
 Allow multiple ports for Radio information, rotator direction, QSO, and spot broadcasts. (K1XM)
 Fixed multiple issues with Statistics Window for 48h contests not starting at midnight. (SM7IUN)
 ES Open updated. (M0CKE, TNX ES7GM)
 Multiple contests updated to address issue updating their data base from log. (SM7IUN)
 All ES local contests updated. (SM7IUN, TNX ES7GM)
 VHF/UHF grid data base updated. (SM7IUN, TNX ES7GM)
 NRAU Baltic data base updated. (SM7IUN, TNX ES7GM)
 CQ WW 160 data base added. (SM7IUN, TNX VE2FK)
 Don't crash if custom multiplier does not exist. (K1XM, TNX ES7GM)
 Fixed issue with Microham transmit lock not being properly disabled at configuration changes or
 program close. (SM7IUN)
 Fixed issue with on-screen startup status message for microHAM MKII, MKIII, and DKII. (SM7IUN)
 DXLog now supports software PTT and transmit lock with microHAM MKII, MKIII, DKII, MK2R, MK2R+,
 and u2R. (SM7IUN)
 Fixed issue which made update of data base from log fail if data base had unused columns. (SM7IUN)
 Added independent IP address and port selection and Gab message for UDP listener. (K1XM)
 Added 60m to default ACC matrix for microHAM SO2R controllers. (SM7IUN)
 Fixed MP3 Configuration Recorder dropdown using wrong audio record device (M7DUG)
 Preliminary support for Contest Super Simulator. (K1XM)

Ver 2.4.14


 Fixed issue with warning files causing blank entries in contest list. (SM7IUN)
 scoredistributor.net is now the default URL for live score reporting. (SM7IUN)
 Bandmap scale is now persistent. (SM7IUN)
 DX Cluster multiplier warnings below entry fields are now off by default. (SM7IUN)
 The actual keyboard shortcuts are now shown in Other CW/Digi messages panel. (SM7IUN)
 Band changes no longer trigger bandmap's "when leaving S&P frequency" actions. (SM7IUN, TNX SM5AJV)
 Added preliminary FOC Marathon contest definition file. (M0CKE, TNX G4IRN)
 Don't crash if HamCap cannot be started. (K1XM, TNX VU2PTT)
 Implement set_radiofrequency UDP message on port 13064. (K1XM, TNX N2NT)
 Add command to stop antenna rotator for broadcast and PSTRotator. (K1XM)

Ver 2.4.13


 Make locking of network structure more consistent in the code. (K1XM)
 FOC data base updated. (SM7IUN, TNX RM2D)
 Further robustness improvements to CAT driver for newer ICOM radios. (SM7IUN)
 Show a cursor in the entry window which does not have focus. (K1XM, TNX SM5AJV)
 Fix problems with rotator control and possible crash on startup. (K1XM, TNX M0CKE)
 Fix RAC Canada Winter Contest exchange for non-Canada stations. (M0CKE, TNX OE1CIW)
 Fix problems with many operators in a Cabrillo file. (Z33RW)
 Added new option under Options -> Data files -> Prefill database settings to open
 DXLog.net database files directory. (Z33RW, TNX SM7IUN)
 Add radio information and antenna direction broadcasts. (K1XM)
 Rework network server close to fix crash. (K1XM, TNX SV1DPI)
 Add 160 to WW PMC Contest. (M0CKE, TNX OE1CIW)
 Updates to SSA MT and SSA JT, including frequency warning file. (SM7IUN, TNX SM5AJV)
 Local Swedish AM contest added. (SM7IUN, TNX SM5AJV)
 Option "Sync radio 1/2 freq & mode" now also works correctly in SO1R. (SM7IUN)
 Corrections to multiplier list for WW PMC contest. (SM7IUN, TNX OE1CIW)
 Updates to Hungarian DX Contest. (SM7IUN, TNX HA6OI)
 Don't crash if logging duplicate QSO with short exchange. (K1XM, TNX K6ND)
 Updates to NRAU Baltic Contest. (SM7IUN, TNX SM5AJV)
 CWOps data base updated. (SM7IUN)
 Add RSGB AFS Data contest definition file. (M0CKE, TNX G4IRN)
 Fix possible crash updating a closed window. (K1XM, TNX N3KS)
 Fix crash if country file is missing or corrupt. (K1XM, TNX W9PA)
 Added EXTFSK.dll to enable MMVARI to use FSK keying in RTTY mode. (M0CKE, TNX G4IRN)
 Add logged QSO information broadcasts. (K1XM, TNX IK2NCJ)
 Fix automatic period switch when the last QSO was on radio 2. (K1XM, TNX HA6OI)
 Improve translations for German, Italian, Croatian. (Z33W, TNX DH2WQ, IK2NCJ, NX7M)
 Don't send space after $CR if Log immediately is set. (K1XM, TNX CT1ILT)
 Fixed a locale issue with UDP broadcast of spots for Flex. (SM7IUN)

Ver 2.4.12


 Updated DXlog.net.DXC icon. (SM7IUN)
 Added SSA Jultest. (SM7IUN, TNX SM5AJV)
 Improved support for ICOM IC-7300, 7700, and 7800. (SM7IUN)
 RUN/S&P switching is now allowed by default. (SM7IUN)
 The name of the current contest is now displayed in the main window's banner. (SM7IUN)
 Reworked K3/K3s CAT driver. Old driver available as "Elecraft K3/K3S old". (K1XM)
 New Elecraft KX2 and KX3 drivers based on reworked K3/K3S driver. (SM7IUN)
 Fixed issue in Check Multiplier Window making all QSO considered DIGI. (SM7IUN, TNX SM5IMO)
 Removed obsolete version of FTDX101D driver. (SM7IUN)
 Fixed issue with Ctrl-- only toggling diversity on radio 1 in SO2R. (SM7IUN, TNX K6MR)
 Fixed issue with mode not being correctly recognized with ICOM in CI-V mode. (SM7IUN)
 Reworked FT-1000mp and FT1000MKV driver.  Old drivers are also available. (K1XM)
 Internal work for internationalization. (Z33RW)
 DXCC window should appear for US in ARRL 160, France in REF. (K1XM, TNX K3JO)

Ver 2.4.11


 Fixed issue detecting active VFO while transmitting split with TS-590S. (SM7IUN)
 Fixed issue with Cabrillo export for WAE RTTY. (SM7IUN)
 Fixed issue with SPLIT not always being correctly disabled on Yaesu FTDX101D. (SM7IUN)
 Support for diversity/tracking/sync on Elecraft K3, ICOM 7610/7851 and Yaesu FTDX101D. (SM7IUN)
 Updated data base for LZ DX Contest. (SM7IUN)
 CWOps CWT updated. (SM7IUN)
 Improved support for Kenwood TS-890S and TS-990S. (SM7IUN)
 Fixed problem with using custom forms DLL. (SM7IUN)
 Improved wording in on screen MULT alert. (SM7IUN)
 Added color setting menu entry for header text in Worked DXCC panel. (SM7IUN)
 Updated Russian WW Multimode contest. (SM7IUN)
 Icon for DXLog.net.DXC now differs from that of DXLog.net. (SM7IUN)
 Add facility for logging serial port communications. (K1XM, TNX N9RV)
 Updates to ES Open contest. (SM7IUN, TNX ES7GM, SM5AJV)
 A range of local ES contests added. (SM7IUN, TNX ES7GM, M0CKE)
 "*" will set the transmit radio in two keyboard mode. (K1XM, TNX S57AL)
 Fix focus issues with SO2R and $SPACE, $SPACEBAR, $CHECKCALL, $GUESSEXCH, $FOCUSRCVD,
 $FOCUSCALL, $FOCUSREC1, $FOCUSREC2, $FOCUSREC3.  (K1XM, TNX SM2WMV)
 Fix bug in cluster spot parser. (K1XM)
 Fix SO2V problems with logging VFO B QSO. (K1XM, TNX R4WW)
 Enabled experimental support for German. (SM7IUN)
 Make serial port logging thread-safe. (K1XM)
 Fix to address random crashes with certain calls in DXPed mode. (SM7IUN)
 Fixed issues with SO2V on IC-7300, IC-7600 and IC-7700. (SM7IUN)
 Fixed issues with SO2V on FT-450D. (SM7IUN)
 Added shortcut Ctrl--/Ctrl-Subtract for toggling diversity on supported radios. (SM7IUN)

Ver 2.4.10


 Improved mechanics for Alt-Y "grab top guess in Check Partials window". (SM7IUN)
 Updated data base for URDXC. (SM7IUN, TNX UR7QM)
 Live score reporting contest names added/corrected for some 35 contests. (SM7IUN)
 Default live score URL is now scoredistributor.net which uploads to both CQContest and COSB. (SM7IUN)
 FOC data base updated. (SM7IUN, TNX RM2D)
 Fixed issue with grabbing spots on VFO B in SO1R with FT-450D. (SM7IUN, TNX 9A5HZ)
 Fixed issue with using VFO B in SO1R with ICOM and Elecraft. (SM7IUN)
 DX Cluster inactivity time-out increased to 60 seconds. (SM7IUN, TNX KU5B)
 Added macros $PBINS and $PBPLUS for voice keyer use. More information in wiki. (SM7IUN, TNX K6MR)
 Built in DVK has priority over radio's if both are accidentially selected. (SM7IUN)
 Obey "Stay in field when moving up and down in the log" between entry windows with one keyboard. (K1XM, TNX R9IR)
 Always go to last field and position when using two keyboards. (K1XM, TNX LZ5DB, K6MR)
 User interface no longer hangs when switching to SO1R with radio 2 focused. (SM7IUN)
 Redesigned FTDX101D CAT driver. Old driver available as "Yaesu FTDX101D old". (SM7IUN)
 Configuration guidance text updated for ARRL Sweepstakes. See also wiki. (SM7IUN)
 Updated HA DX configuration and data base. (SM7IUN, TNX HA6OI & M0CKE)
 DXLog DVK can now use any audio input device for recording. (M7DUG)
 Fixed issue with grabbing spots on VFO B in SO1R with Kenwood TS-590S. (SM7IUN)
 Fix crash with $TR1 or $TR2 in SSB. (K1XM, TNX IK2LFF)
 Fixed issue with USB-D and LSB-D interpreted as SSB on ICOM. (SM7IUN)

Ver 2.4.9


 SSA MT data base updated. (SM7IUN)
 CWOps data base updated. (SM7IUN)
 The shortcut key for "Change station type" is now *only* Ctrl-F3. (SM7IUN)
 Alt-Y has a new meaning: Grab top guess from Check Partials window, if enabled. (SM7IUN)
 FT-450D CAT driver redesigned. Now supports per-VFO mode, RIT, SO2V, and internal voice keyer. (SM7IUN)
 Contest name for DARC WAG changed to only "WAG". (SM7IUN)
 PTT now correctly drops when interrupting DVK with ESC key and CAT PTT is used. (SM7IUN)
 Added option for CAT PTT for CW to support e.g. Microham DXP with radios lacking hardware PTT for CW. (SM7IUN)
 Mode control now works correctly with Yaesu FT-817ND, FT-847, FT-857D, and FT-818. (SM7IUN)
 Several enhancements to CAT drivers for ICOM IC-7300, IC-76x0, IC-7700, and IC-78xx. (SM7IUN)
 Separate and enhanced CAT drivers for Kenwood TS-480SAT and TS-590S. (SM7IUN)
 Preliminary support for TS-890S and TS-990S. (SM7IUN)
 RIT handling enhancements for Yaesu FTDX101D, Elecraft K3/K3S, KX3, and KX2. (SM7IUN)
 Weight control added for Winkeyer. (SM7IUN)
 New macro $SERIALNOAB for transmission of unabbreviated serial number. (SM7IUN)
 Using voice keyer on VFO B in SO2V no longer incorrectly switches entry focus. (SM7IUN)
 Improved layout and more clear wording in SETUP panel. (SM7IUN)
 Fixed rare crash when exporting Cabrillo from a dxpedition log. (SM7IUN)
 Incorrect enforcement of 10-minute QSY rule for MULT station in Multi-Single class removed from SAC, WAG, and WAE. (SM7IUN)
 Grabbing a call sign by double clicking in Check Partials or N+1 windows no longer incorrectly shift focus to exchange field. (SM7IUN)
 Alt-Space now grabs topmost call in Partner window stack if real time fields are empty. (SM7IUN)
 Added "Tools->Data entry->Disable Shift+ message edit function for CW" allowing use of ? on EU keyboards. (SM7IUN)
 Keyboard comma or Keypad decimal now both allow manual addition of one or several calls to partner window stack. (SM7IUN)
 Double clicking on a valid frequency in the Status window will set VFO A of Radio 1 to this frequency. (SM7IUN)
 Accidental F1/CQ on MULT station in Multi-Single class is blocked. (SM7IUN)

Ver 2.4.8


 Audio control is now absolute. The relative "primary/secondary" model for audio control is removed. (SM7IUN)
 Fixed issue with RIT on Yaesu FT-991, FT-991A, and FTDX101D. (SM7IUN)
 RDA contest and data base updated. (SM7IUN, TNX UR7QM)
 Rate window no longer shows (irrelevant) audio status in SO1R. (SM7IUN)
 SSA MT contest and data base updated. (SM7IUN, TNX SM5AJV)
 YO DX contest and data base updated. (SM7IUN, TNX SP5KP)
 EU HF Championship data base updated. (SM7IUN, TNX S57AW)
 SCC RTTY contest and data base updated. (SM7IUN, TNX S57AW, UN7ZAF)
 log4net exception and error logging added. (M7DUG)
 Spot grabbing and bandmap navigation now works without a radio. (SM7IUN)
 Fixed rare crash in Check N+1 window. (SM7IUN)
 CWOps CWT contest and data base updated. (SM7IUN)
 MMVARI FSK port for radio 2 is now correctly remembered in SO2R. (SM7IUN)
 Added context menu in Check Call window to chose modes displayed in MIXED contests. 
 Defaults to CW, SSB & RTTY for contests with >4 modes. (SM7IUN)
 Modes on VFO A and VFO B are now independently controlled on Elecraft KX2, KX3, and K3/K3S. (SM7IUN)
 SRR Digital Cup data base updated and now has correct format. (SM7IUN, TNX UR7QM)
 Mode changes through text commands (SSB, CW, etc.) now works correctly on radio 2 in SO2V. (SM7IUN)

Ver 2.4.7


 Fixed issue with cursor jumping to wrong entry line when grabbing spot. (SM7IUN)
 Fixed issue with "Wipe call when tuning in S&P" option not working for spots grabbed from band map. (SM7IUN)
 Spot bandwidths in bandmap properties panel are limited to reasonable values. (SM7IUN)
 Don't crash with F11 in two-keyboard mode. (K1XM, TNX PY2SEX)
 Option "Tools->Data entry->"ESM mode change focus on $LOGGEDCALL macro" now works as intended. (SM7IUN)
 Added Ctrl-M keyboard shortcut and associated status bar message for ESM enabled/disable. (SM7IUN)
 Default S&P INSERT message changed to "$F2 $CR" to log immediately after sending exchange. (SM7IUN)
 Default QQSL messages updated. (SM7IUN)
 Speed changes and $QSOB4 removed from default messages in all contest definition files. (SM7IUN)

Ver 2.4.6


 Grabbing a spot with Ctrl-Space no longer shift focus to RCVD field. (SM7IUN)
 In SO2V don't skip processing if VFO B goes out of the band. (K1XM)
 Implement SO2V for KX2 and KX3 when "Use SPLIT" is not set. (SM7IUN)
 Fixed issues with different modes on VFOs with SO2V and "Use SPLIT" not set on ICOM. (SM7IUN)
 Updates to IOTA contest data base. (SM7IUN, TNX DK8ZZ)
 Fixed issue with RIT on Kenwood and ELAD. (SM7IUN, TNX SM0MPV)
 SO2V now aborts CW message when switching from B to A VFO. (K1XM)
 Split is no longer disabled when grabbing spots on VFO B in SO2V with "Use SPLIT" enabled. (SM7IUN)
 Fix timing problem with Winkey following message abort. (K1XM, TNX SM7IUN)
 Split audio (AltGr-S) no longer disables at focus change in SO2R and a toggle always return to focused radio. (SM7IUN)
 Audio control (AltGr-S/A/T) now works correctly also in SO2V but with no automatic shifting. (SM7IUN)
 Sent CW QTC has space between time, callsign, and number. (K1XM, TNX R9IR)
 "Don't set ptt when using voice keyer" should not affect CW PTT. (K1XM)
 Fix "*" keyboard command. (K1XM, TNX N4YDU)
 Don't assert PTT on escape if not transmitting or on empty message. (K1XM, TNX SM7IUN)

Ver 2.4.5


 DXLog no longer returns to Run when tuning radio back to CQ frequency and automatic Run/S&P switching is enabled. (SM7IUN)
 Alt-F4 now does nothing if a CQ frequency is not set. (SM7IUN)
 Text command AUTOCW added for compatibility reasons. Equivalent to CWAUTO. (SM7IUN)
 Fixed issue with RIT for ELAD, Expert MB1, SunSDR and Kenwood. (SM7IUN)
 S&P ESM now always sends F1 with cursor in callsign field. (SM7IUN)
 Bandmap's spot highlighting and grabbing ranges increased to 3 and 8 times the spot bandwidth for improved usability. (SM7IUN)
 Subwindow title bar color is no longer incorrectly reset when font is changed. (SM7IUN)
 Select the correct callsign for $LOGGEDCALL when using SO2R with two keyboards. (K1XM)
 Use the mode of the actual transmitting radio when setting up macros. (K1XM)
 Clear exchange after executing a text command. (K1XM)
 Fix some SO2R and SO2V problems. (K1XM)
 Improvement to sub-receiver handling on FT-1000MP and FT-1000MKV. (K1XM)
 Updates to RSGB Low Power Contest. (M0CKE)
 Fixed problem with RIT Up, added RIT Clear and RIT status line indicator for Morse Runner simulation. (SM7IUN)
 Fixed a rare CAT initialization problem for ICOM. (SM7IUN)
 Removed prompt for creation of summary file when exporting Cabrillo. (SM7IUN)
 Implement SO2V for K3 when "Use SPLIT" is not set. (K1XM)
 Show frequency in QSO entry lines if "Show frequency in QSO lines" is selected. (K1XM)
 Implement SO2V for ICOM when "Use SPLIT" is not set. (Primarily for single Rx radios.) (SM7IUN)
 Switch bandmap active background when focus changes in Advanced SO2R. (K1XM)
 Put more messages under correct entry line with side-by-side view. (K1XM)
 Added option to hide cluster multiplier warnings below entry fields. (SM7IUN)

Ver 2.4.4


 More compact content in Gab window with less wasted space. (SM7IUN)
 Update callsigns for Worked Callsigns windows when a new station is worked. (K1XM, TNX K1LZ)
 Updated HQ station prefill data base for IARU HF Championship. (SM7IUN, TNX OZ0J, N6TV)
 Alt-F4 "Return to CQ frequency" also clears entry fields. (SM7IUN, TNX R9IR)
 Updated CWOps prefill data base. (SM7IUN)
 Try harder to find the CQ radio in QSODIFF custom mult window. (K1XM, TNX K1LZ)
 Fixes for second keyboard QSO editing and entry. (K1XM)
 Removed several visual artefacts from the bandmap's animation including jumping CQ and "tuning twitch". (SM7IUN)
 Fixes for changing VFO on a radio, especially when editing an existing QSO. (K1XM)
 Updates to DX Cluster node list. (SM7IUN)
 Updates to RSGB Low Power Contest. (M0CKE, TNX G4BWP)
 Removed RSGB 21/28MHz contest as it no longer exist. (SM7IUN, TNX G4BWP)
 The frequency change threshold in the bandmap properties panel now applies also to automatic RUN/S&P switching. (SM7IUN)
 Updates to Marconi Memorial HF contest. (SM7IUN, TNX DL5JQ)
 Fixed problem where first F1 after focus change sometimes sets CQ frequency on opposite radio/VFO. (SM7IUN)
 Display split in the active radio bandmap for SO2V. (K1XM)
 Subwindow title bar color is no longer incorrectly reset when window colors are changed. (SM7IUN)
 Updates to DL DX RTTY Contest. (SM7IUN, TNX R9IR)
 Always control radio 1 for SO2V.  Do not switch SO2R devices or antenna relays to radio 2. (K1XM)
 Preliminary support for ICOM IC-9700. (SM7IUN)
 Fixed problem with red "TX border" sometimes displaying on the wrong line with DVK. (SM7IUN)
 "Reset Defaults" in the Color settings panel no longer sometimes requires a restart to work. (SM7IUN)

Ver 2.4.3


 Manual DX cluster spots are now indicated in the bandmap by a leading plus. (SM7IUN)
 DX Cluster settings "Default comment" and "Send spots to SmartSDR" moved from Commands to Options menu. (SM7IUN)
 DX Cluster setting "Bandmap type" moved from Commands to Options menu and renamed "Spot handling policy". 
 Processing of incoming spots improved and renamed "Standard", "Complete", and "None". Details in wiki. (SM7IUN)
 Fix Winkey timing issues. (K1XM)
 DX Cluster telnet parser no longer fails when spotter callsign is very long. (SM7IUN)
 Set correct colors for status messages for radio 2 when side-by-side. (K1XM, TNX M0CKE)
 Do not change color of existing line in log when editing using enter key. (K1XM, TNX SM7IUN)
 Contest definitions for IARU 6m and 2m contests corrected. (SM7IUN, TNX I2NCJ, K1XM)
 Do not do default action for key if the key is assigned to an enabled script unless the script
 sets mainForm.ScriptContinue=true. (K1XM)
 Because of high risk for error in a multi-op environment, the automatic OPON based on the most recent 
 QSO ís removed and replaced by a prompt when "Don't allow QSO logging if operator isn't logged" is enabled. (SM7IUN)
 Fix bug if QSO is edited early in contest with networking on. (K1XM)
 Added menu options for adjusting bandmap scale for use with laptops or mouse without scrollwheel. (SM7IUN)
 Fixed problem with false error message when uploading live score to contestonlinescore.com. (SM7IUN)
 Show correct setup dialog after changing between COM and pipe for OTRSP and Winkey deivces. (K1XM)

Ver 2.4.2


 Make CW speed change immediate during transmit for serial and parallel port keying. (K1XM)
 Improved support for Yaesu FTDX101D, Elecraft K2, Kenwood, Expert MB1, and SunSDR2. (SM7IUN)
 Built-in DVK on ICOM 7xxx is now interruptable with ESC. Requires "Don't set ptt when using voice keyer". (SM7IUN) 
 Added missing macro command $GRABSPOT. (SM7IUN)
 Leading asterisk indicating a spot with QSX information is no longer included in call when grabbing. (SM7IUN)
 Skimmer spots are indicated in bandmap by a small leading bullet. (SM7IUN)
 Fix problems with up and down arrows and page up and down with SO2R and two keyboards. (K1XM)
 Reverted change where no local spots are created in Run due to negative side effects. (SM7IUN)
 Updates to ARI Sezione contest. (SM7IUN, TNX IK2JUB)
 Support for playback with built-in voice recorder with FTDX101D. Requires "Don't set ptt 
 when using voice keyer". (SM7IUN)
 Fixed problem with scripted contest names in ADIF export. (SM7IUN)
 Improved spot grabbing accuracy. Closest spot is now always grabbed. (Ctrl-Space and $GRAPSPOT) (SM7IUN)
 Frequency windows (i.e. bandwidth) for incoming spot consolidation, bandmap spot highlighting 
 and spot grabbing are now the identical and those set in bandmap properties panel. (SM7IUN)
 Use PTT delay for Tune (Ctrl-T). (K1XM, TNX LZ5VK)
 Fix a thread deadlock that can cause DXLog to hang on RELOAD and in other cases. (K1XM & KQ1F, TNX K3JO)
 Set the checkbox for hide log header when appropriate. (K1XM, TNX E71DX)
 60m cluster spots are no longer ignored. (SM7IUN)
 Scripts: Field ContestData.OPTechnique is now an enum of type ContestData.Technique. (K1XM)

Ver 2.4.1


 Cleaned up and corrected list of supported radio models. Irrelevant radio models deleted. (SM7IUN & K1XM)
 Support for Expert MB1 and SunSDR2. (SM7IUN)
 Preliminary support for Yaesu FTDX101D. (SM7IUN)
 Remove rotators from config file when they are deleted from the dialog. (K1XM)
 Do not enter callsigns with ? in the log. (K1XM)
 Introduced macro commands $RCVD and $RECINFO. Transmits first and second part of received exchange. (SM7IUN)
 Fixed problem with skipped spaces when certain macro commands are used. (K1XM)
 Removed context menu option to change font site for Antena Rotor and Contest Recorder windows. (E71DX, TNX M0CKE)
 If "Don't allow QSO logging if operator isn't logged" is enabled and no operator is currently logged on, a prompt
 will be automatically shown to log on. (E71DX, TNX E77DX)
 Added unassign option to script definition window. (K1XM)
 Cosmetic changes to Contest recorder window. (E71DX, TNX M0CKE)
 Cosmetic changes to SSB bargraph window. (E71DX, TNX M0CKE)
 Added SM Monthly Contest CW & SSB. (SM7IUN, TNX SM5AJV)
 Fixed problem with spots and networked stations sometimes being 100Hz off in the bandmap. (SM7IUN)
 Handle an F key press shortly after another F key press correctly. (K1XM, TNX IK4VET)
 Updated database for CWOps CWT. (SM7IUN)
 Fixed problem where MorseRunner.exe would not be installed if 2.3.17 or earlier was installed. (K1XM and M0CKE)
 Logging a station in RUN no longer produces a spot (in bandmap & FlexRadio spectrum display). (SM7IUN)
 Added contest name and file creation time to ADIF files. (K1XM)
 Fixed a problem where Enter key and some F-keys caused switch to RUN in S&P with ESM and "F1 key 
 always return to RUN" enabled. (SM7IUN)
 Updated a number of contests' Cabrillo/ADIF names in line with ADIF 3.0.9 standard. (SM7IUN)
 Enter key now correctly sends F1 (not F6) message in S&P with ESM enabled and callsign field empty. (SM7IUN)
 Mode and VFO Focus changes on panel of ICOM v2 radios are now correctly handled with CI-V (no polling). (SM7IUN)
 VFO B/Sub VFO is now correctly read at start up on ICOM v2 radios with CI-V (no polling). (SM7IUN)
 Default S&P F-key macros updated to de facto standard. (SM7IUN)
 Added support for Yaesu FTDX1200 and FT-991A. (SM7IUN)
 Updated config file for IARU Region 1 Fieldday (DARC). (M0CKE)
 Add 60 meters for DXpeditions. (K1XM, TNX 5B4ADA)
 Preliminary support for Elecraft K2. (SM7IUN)

Ver 2.4.0


 Statistics window: new display option added, % difference from target store. (TNX CT1BOH)
 Statistics window: now save selected options in config, and restore when window is reopen.
 QTC receive window: when CTRL is pressed, AGN (F8) message changes and sends row number with 
 AGN message. (TNX DF1QR)
 Digi decoder window, new menu option added: Parse full line on click.
 When checked, it will parse full line and sends to other windows for processing.
 For example, in QTC receive window, it will parse full qtc line and populate all fields (utc, call, serial).
 Winkey - fixed issue with additional echo chars received after cw stop and changing radio focus. (TNX N2NT)
 Morse runner emulator - CTRL+Shift+Left/Right - changes pitch level down/up
 QTC Send form - Send all button added. In RTTY, it will send QTC group/number and all QTC's from that
 group/number. (TNX DF1QR)
 Decoder window buttons - right click on button starts button editor. It's possible to change label text, font size,
 background and text colors for each button.
 Decoder window buttons - tooltip text shown when mouse cursor is positioned over button. Tooltip shows button shortcut and
 label text as well as button message macro content.
 Antenna controller window title text fixed. (TNX CT1ILT)
 New cw abbreviation option - custom mode. User can set own translation table for serial number. (TNX YT6W)
 TRC DIGI contest supported.
 Fixed custom ICOM commands (TNX SM7IUN)
 YU DX Contest - new rules for multipliers (K1XM, TNX YT7M)
 Fix non-Winkey stop and quickly start CW sending (K1XM, TNX N2NT)
 Eliminiate incorrect "INVALID MULTIPLIER" messages in contests with two exchange possibilities such as RDXC. (K1XM)
 Add pipes for OTRSP and WinKey devices which support them such as the YCCC SO2R Box. (K1XM)
 Add Reset Interfaces tool menu item, Ctrl+Alt+R, text RESET.  Closes and re-opens serial port and pipe connections to
 radios, keyers, SO2R devices etc.  Same as entering Configure Interfaces and clicking OK. (K1XM)
 WinKey improvements.  New dialog to set keyer type, autospace, reverse etc.  Handle paddle interrupt, speed pot.
 More robust handling of speed changes during messages.  Don't hang if half-space seen. Don't drop PTT on spaces. (K1XM)
 Cosmetic improvements to Clock form - removed border and context menu setting to set top bar color. (E71DX)
 Removed distractions from Extra information form - full file path replaced with filename and removed number of lines. (E71DX)
 Removed borders on left and right side of the main screen. (E71DX)
 Cosmetic improvements to main toolbar - removed unusable grip and rounded corners. (E71DX)
 Removed margins from top menu bar - reverting to system default behavior using less screen spac. (E71DX)
 Morse Runner integration improvement - transmit will not be interrupted if pressing an F-key (and only F-keys) while the 
 radio is in TX mode. (E71DX, TNX IK4ZGO & Z33RW)
 Changed appearance of the Load contest at startup function - removed subitems from menu. (E71DX)
 Provide immediate Auto log backup status in toolbar with checkbox. (E71DX)
 Under the hood cleanup - removing unused libraries and components. (E71DX)
 Don't crash if a wrong-mode QSO is in the log and the call is entered. (K1XM)
 Added new option under File -> Open configuration directory to open DXLog.net configuration files directory.
 (E71DX, TNX SM7IUN)
 If in SO2R and S&P window does not have focus do not try to change focus when the callsign is deleted by changing the
 VFO frequency (K1XM, TNX K6MR)
 Don't lose the first letter of the callsign or the exchange for local spots in the bandmap after restart. (K1XM, TNX K6MR)
 Keep the setting Bandmap->Add with SPACEBAR across stop/start and RELOAD. (K1XM, TNX K6MR)
 Many fixes to Cabrillo import.  Cabrillo V2 is handled better.  Error handling is improved.  Contest files for several
 contests have been fixed. (K1XM, TNX SM7IUN)
 Resizable windows can be locked, so their size can't be changed by right clicking on them. This minimizes the border around 
 the window and enables to use more space on screen and also to make windows look more uniform. (E71DX)
 Cosmetic improvements to bandmap. Removed borders inside the window to use more of the available screen space. (E71DX)
 Shipping new, updated (reduced) list of DX Cluster nodes for new installs. (E71DX, TNX M0CKE)
 Fixed error when trying to delete the last remaining rotator. (E71DX, TNX OE3REC)
 RIT control added for ICOM v2 radios (i.e. 7600, 7700, 78xx, 7610 & 7300) including $CLEARRIT macro command. (SM7IUN)
 Keyboard RIT and frequency adjustment step size increased to 20Hz from 10Hz. (SM7IUN)
 Improved Shift-Up/Down key VFO control. RIT in Run, frequency adjustment in S&P. Works for all operating techniques. (SM7IUN)
 Don't show antenna selection or rotator window menu items if they are not configured. (K1XM, TNX M0CKE)
 Support for ICOM IC-7610 including voice keyer (7 memories) and transceive CAT auto messages. 
 (Known issue: Internal DVK can only be interrupted by DXLog for the first few seconds due to limitations in 
 ICOM CAT protocol. Recording is also not supported.) (SM7IUN)
 Improved user experience, particularly in SO2V, with ICOM IC-7300/7600/7610/7700/7800/7850/7851 with 
 transceive CAT auto messages enabled. (SM7IUN)
 Support for built-in voice keyer with ICOM IC-7300/7850/7851. (First 7 memories) (SM7IUN)
 Support for Yaesu FT-817ND and FT-818, including RIT. (SM7IUN)
 RIT support added for Yaesu FT-847D and FT-857. (SM7IUN)
 Support for Elecraft KX2 and KX3, including internal voice keyer record and playback. (SM7IUN)
 Fixes for antenna selection and rotator control when an antenna server is not used. (K1XM, TNX M0CKE)
 Add WKSETUP or WKEY commands, other minor fixes. (K1XM, TNX M0CKE)

Ver 2.3.17


 SloVhf.net posting live score implementation fixed. (TNX E77DX/OE1EMS@OE1W)
 ADIF export - STATION_CALLSIGN added as export field. Also, OPERATOR field is populated
 with same information if operator wasn't logged on during logging time in DXLog. (TNX YT9TP)
 Yaesu FT-991 support added.

Ver 2.3.16


 Winkey init bytes changed to work correctly with Flexradio.
 ARRL DX contest config Cabrillo output fixed for Multi op stations. (TNX OM3BH)
 Flexradio API included - used for sending spots.
 New menu option added: Commands->DX Cluster->Send spot to SmartSDR.
 When checked, it will send all spots and bandmap additions to SmartSDR bandmap.
 Replaced SortedList object with Dictionary because of regional settings and threading issues.
 Russian WW RTTY Contest - received oblast field was read only. Fixed. (TNX 9A9A)
 EA RTTY Contest - in M/M category, serial numbers added per band now. (TNX 9A9A)


Ver 2.3.15


 Cabrillo/EDI export encoding changed to allow ASCII 8bit charset. (TNX SM5SIC)
 Wednesday mini contest config changed according to the rules. (TNX RM2D, R9IR)
 If autosending is turned on and esc key is pressed before autosending is activated, it will be disabled
 until callsign field is cleared. (TNX RM2D)
 DXCAnn window - holding ALT when clicking on spot will send spot to inactive radio in SO2R mode. (TNX IK2NCJ)

Ver 2.3.14


 New entry screen layout added.
 Entry lines can show listening status
 CW text can be visible during TX time.
 TX border added. When station TX, TX border is visible around entry line.
 QSO entry line always starts from radio 1 or 2, not from log anymore.
 CQ Vojvodina contest rules implemented. (TNX YT3W)
 Scottish DX Contest rules implemented. (TNX YT3W)
 DMC RTTY contest rules changed. (TNX OH3P)
 Bandmap line color added in bandmap color properties. (TNX G3BJ)
 Club tag added in live score posting xml. (TNX K6MR)

Ver 2.3.13


 RSGB FD contest rules changed. (TNX M0CKE, G4IRN)
 RSGB UKAC contest rules changed. (TNX M0CKE, G4PIQ)
 More fixes added in DXL antenna server functionalities. Now Arduino based equipment supported. (TNX K1LZ, K3JO and JT5DX team)
 Elecraft K3 - cw rev and data rev modes are now recognized from CAT. (TNX G4BWP)

Ver 2.3.12


 Helevetia contest - new rules added. (TNX HB9CAT, HB9DUR, IK2NCJ)
 DXCluster line parser - fixed when longer callsign is spotter which causing non fixed data structure. (TNX RM2D, DJ1YFK)

Ver 2.3.11


 SO2V mode - when tx on 2nd vfo, entry focus was always switching back to first entry line. Fixed. (TNX N7TR)
 YU DX Contest - new rules added. (TNX YT3W, YU1DW, YU1EW)

Ver 2.3.10


 When visible in log lines, operator name and frequency wasn't refreshed until scrolling wasn't activated. Fixed. (TNX G4IRN, 9A3OS)
 Some fixes added when ESM mode is used in combination with SHIFT binding to opposite radio and RST hidden. (TNX LZ5VK)
 New language available: Norwegian. (TNX LB3RE)
 IARU 2m contest added as new contest. (TNX M0CKE)
 EUHFC and SCC RTTY Contest - Cabrillo output adjusted according to the current rules. (TNX S57AW)
 New contest supported: RSGB International DX contest. (TNX M0CKE, EI3JE)
 Alt + space - grabs last known callsign from digi decoder window if exists. Otherwise, works as before, grabs call from partner window. (TNX K3JO)
 $OTRSP=x macro implemented. Send custom commands to OTRSP device. (TNX K3JO)
 ARI DX contest config changed to new rules. (TNX IK2NCJ)
 When contest with periods was active, radio 2 entry line period wasn't updated correctly. Fixed.
 QSO editing, problem with qso editing, when dupe qso existing in the log after edit qso. Multiplier wasn't updated correctly. Fixed. (TNX IU3AZC)
 UBA PSK63 config adjusted to new rules.
 NAQP/NASprint config changed for new rules. (TNX W9PA)


Ver 2.3.9


 CWAUTO text command now opens CW autosending dialog. (TNX R9IR)
 New option available: Options->Interface specific options->Automatically open/close digi window on mode change.
 Usable in multi mode contest. When checked, it will automatically open digi mode window when mode is changed to some digital modes.
 Also, when mode is changed to some non digital mode (for example cw/ssb), it will close digi mode window immediately. (TNX IU4AZC)
 DXC spot mode is now also checked in the spot comment. If correct mode is parsed from the comment, it will be associated with the spot.
 Otherwise, DXLog will check for the mode from bandplan.
 When MMVARI is used as decoder, carrier frequency and NET/AFC state is stored in the config and restored when digital window is reopened. (TNX IU4AZC)
 Some fixes included in SA SPRINT config file according to the rules. (TNX K6MR)
 New config option available: DXC_COMMENT_EXTRACT.
 It can be configured to extract some exchange / multiplier information from this field. 
 Used for IOTA contest to extract IOTA reference from DXCluster comments. (TNX EI3JE)

Ver 2.3.8


 Multiple keyboards can be used for SO2R(V) mode. Check Options->Keyboard selector to assign separate keyboard for each
 entry line. (TNX CT1BOH)
 Live score - qso/mult breakdown posting can be turned off. In that case only totals are posted.
 Live score - https / authenticated posting is implemented.
 SQLite dll's changed to statically linked version and upgraded to latest version (1.0.102).
 Live score - auto posting period was always 5 minutes. Fixed to accept change to different value. (TNX IK2NCJ)

Ver 2.3.7


 Mode edit commands in logged qsos was broken for digi mode qsos. Fixed. (TNX IU3AZC)
 Live score post http address can be adjusted to different value if needed. (TNX K6MR)
 FT1000 and FT920 new code is finally fixed and tested with real radio. (TNX OE1EMS, DL8BH)
 New contest supported: SA-SPRINT. (TNX LU5DX)
 New features implemented for LZ HF Field contest. (TNX K1LZ)
 TCP/IP connection client ip/name expanded from 16 to 100 chars to allow entering fully qualified domain names. (TNX IK2JUB)
 CTRL+ALT+G (or AltGr + G) introduced as shortcut for sending message to ON4KST.
 Rit moving with Shift UP/DOWN keys wasn't working correctly for Kenwood radios. Fixed. (TNX M0CKE)
 New option added: Edit->X-QSO flag (CTRL+X shortcut). Used to change the status of XQSO flag.
 It can be used to mark QSO in the log as X-QSO. Such QSO, when marked, wouldn't be counted in the log and will be exported
 in Cabrillo as "X-QSO:" line. QSY timers and double QSO checks wouldn't calculate this QSO. Flag is propagated as network
 change, so all networked PC's will see the same picture.
 IARU HF Championship - worked HQ's window implemented.
 IARU HF Championship - HQ mult calculation is based on DXCC. This means if same HQ reference is used for different HQ stations,
 it will be counted properly. Exceptions of this rule are R1, R2, R3 and AC multipliers, which counts only once per band.
 DXCC for HQ mult is visible in worked HQ's window.
 Worked grid square map is added.
 IARU HF Championship HQ prefill database updated (TNX M0CKE, YT3W)
 ADIF import changes: multiple files can be selected for import, added options for ignoring duplicate qsos during import and sorting
 log by qso date/time after new qsos are imported. (TNX DK8ZZ)
 New option available: File->Merge logs. Different DXN log files for same contest and callsign can be merged into single log file.
 New option available: Options->Log->Show date in qso lines. When checked, it will display qso date in log qso lines just as
 read only information. (TNX DK8ZZ)
 Database save time is fully optimized. Data saving is much faster now.
 Network synchronization protocol optimized. Allows couple of time faster synchronization of big logs through the network with
 reduced CPU on receiving side due different thread usage.
 SCWC database updated. (TNX YT7M)
 Custom country file (for example R150S.dat) can be used if defined in config file. DXCC_DB_TYPE should be defined as CUSTOM_CTY.
 In that case, selection in Options->Data files->Country files will be ignored, and country file defined in config file will be used.
 CQ-M contest: changed country file to R150s.dat.
 RRTC contest: changed country file to R150s.dat.
 RRTC contest: added support for field team operating side. (TNX UA4FER, R9IR)

Ver 2.3.6


 EUFF Green party contest renamed to WWFF Green party. Config adjusted for new rules. (TNX 9A1AA)
 New contest supported: ARI sezzione contest. (TNX IU3AZC)
 IOTA contest config file updated to current rules. (TNX M0CKE)
 Yaesu cat protocol for FT-920, FT-1000MP, FT-1000MKV radios fixed. (TNX DL8BH, IU3AZC)
 ADIF Export/Import - APP specific fields are automatically included in export and/or import when specific entry
 field isn't clearly connected to some other value (for example CQ Zone). In that case DXLog.net will export field values as
 APP_DXLOG_RCVD, APP_DXLOG_RECINFO, APP_DXLOG_RECINFO2 and APP_DXLOG_RECINFO3. Also, in import procedure, if such fields exists
 in ADIF file, they will be imported in corresponding field in the log.

Ver 2.3.5


 When "shift binds to opposite radio" is checked, SHIFT+Fx keys doesn't activate message editor. Instead, it is starting
 message sending on opposite radio. (TNX SM5AJV)
 Multiplier list can be refreshed when focused radio is changed. Check Tools->Data entry menu to enable it. (TNX E77DX, CT1ILT)
 Support for Yaesu FT-920 implemented.
 Optimized cat protocol for some Yaesu radios.
 Support for ICOM IC-7300 implemented.
 Bandmap drawing optimized when displaying frequencies close to lower band edge.
 New Microham locking commands implemented. (TNX OM7ZZ)
 In SO2R mode, repeat was stopped when bandmap entry was selected at opposite radio. Fixed. (TNX RT9I)

Ver 2.3.4


 New contest supported: Volta RTTY. (TNX YT3W)
 DXCC searcher function updated to supported callsign combinations with multiple additions (for example xxx/QRP/P).
 ARI DX Contest - cabrillo output fixed for Italian and non-Italian stations. (TNX IK2NCJ)
 New option added: Operating->Bandmap->QSY opposite radio instead of 2nd VFO. Default not checked.
 When checked, it will move through bandmap at opposite radio when pressing CTRL+ALT+UP/DOWN instead of using same radio
 2nd VFO. For example, when focus is at Radio1 line, it will QSY Radio2. And opposite, when focus is at Radio2 line,
 it will QSY Radio1 line. (TNX RT9I)

Ver 2.3.3


 New option added: Options->Interface specific options->Round freq to nearest kHz when sending from macro.
 If checked, it will round frequency to nearest kHz when macro command is used to send a frequency (for example in $FREQOR macro).
 Default is not checked.
 ARRL DX Contest: band change rules fixed. (TNX EI3JE)
 Code for changing buffered CW speed for Winkeyer is optimized now. (TNX CT1ILT)
 $TRx macro behavior fixed when mixed mode contest is used. (TNX OH6KZP)
 Network protocol is changed. Msg number ID added to enable duplicate message identification if network loop happens because
 of some configuration settings. Now, duplicate messages are detected and ignored. (TNX HB9BUN)
 Initialize method in not enabled scripts was called during script instance creation. Fixed. (TNX IK2NCJ)
 When MMVARI is used for RTTY with FSK keying on COM port, if MMVARI window is closed, COM port wasn't properly released which
 caused error when MMVARI window is opened again. Fixed. (TNX IU3AZC)
 New options available: Options->Interface specific options->Radio 1/2 Transverter Offset setup.
 Can be used to set offset for transverter usage in V/U/SHF contest usage. (TNX HB9CAT)

Ver 2.3.2


 ELAM FDM-DUO CAT support added. (TNX M0CKE)
 Rate last 10 and Rate last 100 formula adjusted to correct values. (TNX CT1BOH)
 More fixes added under some scenarios during Morse Runner simulation. (TNX CT1BOH)
 Log qso immediately when $CR macro is found was always executed. Fixed. (TNX CT1BOH)
 Smart correction option implemented. (TNX CT1BOH)
 RSGB UKAC contest - 70 MHz band added in configuration.
 Serial number sequence wasn't correct when switching between vfo a/b. Fixed. (TNX IW1QN, IK2NCJ)
 When MMTTY is used in SO2R environment, some parameters (TX port / Radio name) wasn't restored properly
 from shared memory, as same memory segment is shared within multiple instances of MMTTY. Fixed. (TNX IK2NCJ)
 PACC Contest config adjusted according to new rules.
 New contest supported: RSGB International Sprint Contest. (TNX EI3JE)
 New contest supported: RSGB RoLo Contest. (TNX EI3JE)
 ADIF import was broken in previous versions. (TNX 9A1AA, E77DX, DK8ZZ)
 New macro commands available: 
   $FREQOR - returns frequency of opposite radio in SO2R
   $BANDOR - returns band of opposite radio in SO2R

Ver 2.3.1


 Pass mult message text boxes max char limit was set to 16 by mistake. Fixed to allow more characters. (TNX IK2JUB) 
 Clear stack message propagated in the network created loop. Fixed. (TNX EI3JE)
 Interlock optimistic method added. When software interlock is used, if blocking allowed response isn't received from all stations requested for
 blocking before timeout, we assume that other stations are blocked and TX is allowed.
 Morse Runner full SO2R simulation available. Special version of Morse Runner is need for this to work.
 Fixed and optimized some timing issues during alternatecq scenario. (TNX CT1BOH) 
 Special version of MorseRunner.exe adjusted for DXLog.net usage is now shipped with DXLog.net installation. MorseRunner.exe is started automatically when
 simulation is enabled. If you use SO2R mode, there will be two instances of MorseRunner.exe started. When simulation is disabled, or active log is closed,
 DXLog.net will automatically close MorseRunner.exe processes.
 MorseRunner.exe screens aren't visible by default when simulation is started. CQ WW or CQ WW simulation is started automatically is any of this contest
 files is used when enabling morse runner simulation. If any other contest is used, default simulation is started.
 F1 and F2 CW messages are now sent to Morse Runner, so Morse Runner is sending same message content as DXLog.net.
 RAEM contest, database file added. (TNX R9IR)
 Mult worth and mult counts formula in rate window wasn't calculated correctly. Fixed. (TNX CT1BOH)
 SETUP text command during Morse Runner simulation opens parameters screen instead of configure interfaces screen. (TNX IK2NCJ)
 CTRL+ALT (or AltGr) + PageUP/PageDOWN now changes monitor volume up/down in Morse Runner simulation.
 CTRL+ALT (or AltGr) + LEFT/RIGHT now changes receiving bandwidth in Morse Runner simulation.
 RIT change (SHIFT+UP/DOWN) shortcuts now change RIT in Morse Runner simulation.

Ver 2.3.0


 ALT+F4 changed RUN/S&P mode to RUN, but didn't refresh screen information correctly. Fixed. (TNX 9A3XV)
 New option added: Tools->Data entry->F1 key returns to RUN mode always.
 If checked, it will switch from S&P to RUN mode always when F1 key is pressed. (TNX 9A3XV)
 Network timeout period can be adjusted. Default is 120 seconds. (TNX IK2NCJ)
 Worked DXCC window - new information available - DXCC expected, spotted and worked. (TNX HB9BUN)
 QSY Wizard smart info available. Each band line is shown in different color if multiplier is needed on the band.
 Also, if mult station is available on the band, line will be marked with different color.
 Click on band line brings Pass a station window with filter on clicked band.
 This can be enabled/disabled in Options->Networking options menu.
 New information added in log lines. If station in qso line is multiplier on some band, it will be shown as warning
 in lines bellow log with information on which band multiplier is needed. Also, it will show possible qsy frequencies
 on the band based on network status information.
 DXLog.net.DXC.exe application is included in main package. This application is used for connection to multiple
 DX Clusters, Skimmers etc. Also, it can be used for tracking of networked radio and synchronizing with local cw skimmer.
 Interlock blocking can be forbidden with clicking on interlock status line in Operating info window.
 Also it can be forbidden with $PILOCK macro, and allowed again with $AILOCK macro commands.
 DXCluster inactivity timeout check process changed.
 If there isn't any traffic received from DXC for 120 seconds, DXLog.net will sent keep alive message (enter key) to DXC.
 If there isn't any traffic received from additional 30 seconds, DX Cluster will be disconnected and reconnecting process will be started.
 DXC client application, new option available: Connect all tabs. It will start connection on all defined tabs. Can be used to
 connect all connections with single click.

Ver 2.2.19


 UK/EI DX Contest Database and Warning file added. (TNX EI3JE)
 RSGB 6M AFS contest added. (TNX EI3JE)
 Multiple DB prefill files can be used in contest config file to combine data.
 Issue with "ALL" keyword as multiplier data fixed. (TNX K6MR, W9PA)
 CAT interface for Yaesu FT-1000D rewritten. (TNX EI3JE)
 Fixed issues with mode changes when decoder window is opened.
 CW abbreviations wasn't implemented correctly in some SO2R combinations during mixed mode contest. Fixed. (TNX OH6KZP)
 Bandmap mouse scrolling wasn't working when multiple monitors used or when floating mode is used. Fixed. (TNX K6MR)
 If MS VC++ 2010 RTM wasn't installed, some default databases didn't created properly when DXLog.net was first time
 started. This was creating error messages and had to be manually fixed. Now, DXLog.net will fix broken files if possible.
 New interlock type is available: interlock with same station type from status list.
 Multiple interlock options now can be combined. (TNX IK2NCJ)
 Custom prefill database selection is now available. Check menu Options->Data files->Prefill database settings.
 New prefill database type is available: CSV. This allows usage of any CSV type database, for example: N1MM call history databases.
 When bandmap list wasn't sorted by frequency, grab spot up/down wasn't working properly if there wasn't any spot
 selected. Fixed. (TNX LU5DX, M0CKE, S55M)
 CTRL+SHIFT+Up/Down arrow shortcut functionality is changed. Previously, this was used to grab first upper/lower spot, even if spot
 was invalid (worked qso, invalid qso for contest). Now, it is used to grab first upper/lower multiplier spot.
 New option available: Don't prefill exchange in ESM mode when bandmap spot is clicked. (TNX LU5DX)
 DXC Announcements window: multiplier and qso count info is added.
 New option available: Show frequency in QSO lines. If checked, it will show exact frequency for each qso in log lines.
 When ALT+F4 shortcut is used to return to CQ frequency, station is automatically switched in RUN mode. (TNX LU5DX)
 Automatic radio RUN/SP mode switching wasn't working properly in Advanced SO2R technique. Fixed. (TNX K6MR)
 When working S&P, automatic adding of callsign in bandmap in some scenarios also changed focused entry line. Fixed. (TNX K6MR)
 New radio config option added. DATA mode usage can be forced instead SSB for any digi mode even when AFSK is used. (TNX K6MR, N6TV)
 Method for closing MMTTY process changed to allow MMTTY to correctly save paramaters. (TNX K6MR, N6TV)
 When smart interlock is used and unblocking is possible status in Radio/Ant window is shown in different color (TNX EI3JE)

Ver 2.2.18


 New contest supported: UKEICC 80 meters. (TNX M0CKE)
 New contest supported: Irish Radio Transmitters Society Counties Contest. (TNX EI3JE)
 RSGB 80m contest definition fixed and warning info about band segments added. (TNX EI3JE)
 Russian WW Digi multipler count fixed according to the rules. (TNX R9IR)
 SHIFT+UP/DOWN RIT movement was broken in previous version. Fixed. (TNX K6MR, N6TV)
 UK/EI DX Contest now supported. (TNX EI3JE, M0CKE)

Ver 2.2.17


 Remote commands can be sent to stations in the network.
 Check multipliers window now shows only mode selected in contest config screen, if not operating mixed. (TNX YT3W)
 WAE - some corrections implemented in QTC editing. (TNX E70T)
 Mode change problem for digi modes with CTRL+F1/F2 fixed. (TNX HB9BUN)
 New option available for SO2V mode: Options->Interface specific options->Use SPLIT in SO2V technique.
 When checked, DXLog.net will activate SPLIT mode instead of VFO change when changing entry lines in SO2V technique.
 New radio support added: Flexradio.
 New option available: Options->Interface specific options->Use different bandmap background for active radio.
 When checked, it will use different bandmap background color for active (selected) radio or VFO in SO2R and SO2V mode. (TNX 4O3A)
 COM port switch problem fixed when footswitch was activated quickly couple of times. (TNX R9IR)
 CW speed can be changed with ALT+F9/F10 from QTC received window. (TNX R9IR)
 When QTC receive window is closed by clicking on conrol box, it remembers last state of fields in temporary buffer. (TNX R9IR)
 If window is reopened with same callsign it will restore it state. 
 Temporary buffer is cleared when new callsign is used and QTC receive window is opened.
 New buttons available at QTC receive window: F4 - sends "DE MYCALL" and F9 - sends "QSL Group/Num" (TNX R9IR)
 Spacebar in QTC receive window now cycles in actual line only, not moving to new line anymore. Use enter to skip in next line. (TNX R9IR)
 Escape doesn't close QTC send/receive window anymore, it just stops actual transmission. (TNX R9IR, IZ8JAI)
 Logged operator property wasn't filled correctly when status info message was created. Fixed. (TNX IK2JUB)
 New option in radio port setup: Don't poll during TX and Reinitialize port after switching from TX to RX. 
 First option is used to disable radio polling during TX time.
 Second option is used to reinitialize port after you switch from TX to RX. It is useful in case of problems with RF feedback
 during TX time and if your CAT interface has stopped working because of that.
 New radios supported: IC-7850 and IC-7851. (TNX VA3MJR)
 New radio supported: IC-7100.
 QTC receive window msg F4 wasn't sending callsign. Fixed. (TNX R9IR)
 QTC send window - ALT+F9/F10 wasn't changing cw speed. Fixed. (TNX R9IR)

Ver 2.2.16


 New option available: in SO2R or SO2V mode, focused entry line can have different color. (TNX CT1ILT)
 Tentec OMNI VII is now supported.
 New contest supported: CQ WW VHF.
 SO2V technique - lot of fixes implemented. (TNX CT1ILT, M0CKE, G4IRN)
 New option available: Operating->Shift binds to opposite radio.
 When checked, if operating technique isn't SO1R, when LEFT SHIFT key is pressed focus will be move to opposite
 radio entry line. This allows quickly edit of opposite radio data without moving radio entry line focus with 
 up/down arrows or other keys. 
 New option available: Tools->Data entry->Cancel serial number reservation only if callsign field is empty.
 When serial number reservation is used and this option is checked, it will cancel serial number reservation
 during wipe qso function only if callsign field is empty. (TNX CT1ILT)
 When single click selection was enabled in bandmap, right mouse click was selecting the spot. Fixed. (TNX CT1ILT)
 ALT+F3 - send spot. Added space at the end of default spot message for easier adding of comment. (TNX CT1ILT)
 Bandmap view now can be shown in opposite direction (bandmap context menu - Show from higher to lower frequency).
 By default it is shown from lower frequency on top of the screen to higher frequency on bottom of the screen.
 If new option is checked, bandmap view is shown from higher frequency on the top of the screen to lower frequency
 on the bottom. CTRL+UP/DOWN shortcuts are adjusted to works always in same direction in bandmap.
 In bandmap view, when active frequency is close to the band edge, active frequency line is scrolled from middle position
 to the band edge.
 EUHFC prefill database updated. (TNX YT3W)
 NAQP prefill database added. (TNX W9PA)
 Some problems with Update database options should be fixed now. (TNX W9PA)
 Shift and caps lock binding is deactivated when DXLog.net isn't active (focused) application. (TNX CT1ILT)
 In SO2V mode, RX focus was following focus line. Now changed to R1 only. (TNX CT1ILT)

Ver 2.2.15


 Quick fix because of problem with wrong events raised in SSB mode when CAT is connected.

Ver 2.2.14


 If own DXCC wasn't recognized, log file loading was broken. Fixed. (TNX I4UFH)
 $QQSLRESET now resets Intelligent Quick QSL counters. (TNX M0CKE)
 Intelligent Quick QSL now works with separate counters for R1 and R2.
 IARU R1 6M contest is now supported.
 Bandmap delete callsign option was broken when additional data was shown (for example heading). Fixed. (TNX IK2JUB)
 $13 macro doesn't require space char after it anymore. (TNX M0CKE)
 CTRL + UP / DOWN arrows now selects first or last available spot if current frequency is above or bellow first or last 
 available spot in bandmap (or bandmap list view). (TNX G4IRN, M0CKE)
 Logged operator list is now built from operator list entered in config screen and log when log is opened.
 Logged operator information is now visible in status window for each station if operator is logged.
 Logged operator information is visible also in Clock window. (TNX G4IRN, M0CKE)
 Double click on station in status window now automatically opens GAB message window with destination set to
 station id which is clicked in status window.
 Work dupes option changed default to yes now.
 Problem with resending CQ while REPEAT mode is on solved. (TNX S51TA)
 RAC contest - default message for report outside VE was power instead of serial number. Fixed. (TNX 9A1AA)
 HMKOS - 160m band wasn't available in contest config. Fixed. (TNX 9A1AA)
 If tab was used as delimiter in XDT file, searcher didn't found and show correct value. Fixed. (TNX K6MR, N6TV)


Ver 2.2.13


 Bandmap minimum size is now set according to the size of frequency panels. (TNX I4UFH)
 Custom C# script class name can be set to anything needed. 
 DXLog.net during initialization of scripts will search for first class in the script which implements ScriptClass interface
 and will use that class.
 Added enabled/disabled check box in script definition.
 Scripts can be enabled disable from macro with commands: "$!ENABLE!script_name" and "$!DISABLE!script_name" where script name
 is name defined in scripts manager definition.
 When found in the code, enable option calls Initialize method in script and disable option calls Deinitialize method.
 Check partials and N+1 windows now show multiple data from prefill database if they exists.
 Prefill database query for check partials and N+1 windows is now optimized for larger databases.
 Frequency data for PSTRotator is now send to all lines where frequency from radio belongs to band for line from PSTRotator config
 and frequency checkbox is checked. It doesn't depend on currently selected antenna anymore.
 Mode change wasn't sent always when needed to radio. Fixed. (TNX DH6JL)
 Live score band settings wasn't restored from active file when restarted. Fixed. (TNX R9IR)
 Log header visibility status wasn't saved in config file. Fixed. (TNX M0CKE)
 New contest supported: UKSMG 6m contest.
 PSTRotator support is fully finished now. Sending azimuth and/or frequency data. (TNX YO3DMU, M0CKE)
 EA4TX rotator support added. Using UDP messages to ARSVCOM software by EA4TX. (TNX EA4TX)
 .NET DLL's with custom forms can be added now. 
 Code is moved to VS 2013.
 WIX Project installer is upgraded to latest version.
 Update database command was broken due optimization for prefill database query. Fixed. (TNX I4UFH)
 VGE Sprint multiplier calculation wasn't correct. Fixed. (TNX EA4TX)
 Auto sending INSERT message after 3 or 4 characters options added. (TNX S51TA)
 Intelligent Quick QSL option added. 

Ver 2.2.12


 New networking option: Don't allow qso logging if number isn't reserved.
 When using serial number server, QSO logging will be prevented if serial number isn't reserved from number server.
 Also, when number server is used, when reservation process is started DXLog.net will show active QSO NR as 000 until
 reserved number is sucessfully received or reservation is cancelled.
 GRITTY decoder is now supported for RTTY contest.
 OmniRIG TX/RX status now can be used when CAT TX option is choosen.
 New options added to check partials windows: Show data from prefill database.
 When checked, data from prefill database will be shown in Check partials and/or Check N+1 windows.
 Integration with PSTRotator is now available. 
 Florida QSO party Cabrillo file wasn't generated correctly. Fixed. (TNX NF4A)
 Bug fix: callsign click on callsign in DATA or GRITTY window in ESM mode moved focus to RCVD field, it should stay in 
          callsign field. Fixed. (TNX M0CKE)
 TX/RX switching with OmniRig wasn't implemented correctly. Fixed. (TNX EI2JE)
 Bandmap - data list view - when selected item was gone outside of visible area, list wasn't scrolled at correct position
 and item wasn't visible. Fixed. (TNX M0CKE)
 Tooltip display delay added for Bandmap data list view. (TNX E70T)
 Winkey initialization delay increased to 400ms, according to documentation to allow WK2 to initialize after powep up
 when COM DTR/RTS pins are used for it. (TNX M0CKE)
 MMVARI - audio channel selection was broken. Always set to left. Fixed.
 Number server - serial number reservation now can be used separately for R1 and R2. This allows number server usage 
 also in SO2R mode with single PC.
 New macro added: $RESERVENR - sends reservation request for serial number to number server.
 New option available: Spacebar reserver number. When checked, spacebar press in callsign fields sends reservation
 request for serial number to number server. By default, it is checked.
 Reserved number color - now, when serial number is reserved, sent number color will be shown in different color.

Ver 2.2.11


 RDXC rules and database updated. (TNX YT3W)

Ver 2.2.10


 Mouse middle button click wasn't implemented in secondary decoder window. Fixed. (TNX K6MR, W9PA)
 CW/Digi messages are now saved in appdata folder for each contest type.
 Messages are restored from this file when new contest file with same type is created.
 Translation to Italian language is added. (TNX IK2NCJ)
 UBA contest multiplier display corrected by band (not by band/mode). (TNX IK2JUB)
 New contest supported: LA local contest - NRRL Winter Contest. (TNX LB3RE)

Ver 2.2.9


 Mouse middle button click in digi mode decoder now also adds call to partner stack. (TNX N6TV)
 New option added: Tools->Scripts manager.
 DXLog.net now supports custom made C# scripts, to enable additional functionalities.
 Custom scripts are written in C# language and they are compiled during runtime. 
 Script can be assigned to some shortcut and will be executed when shortcut key is pressed.
 Also, script can be called by name from CW/Digi message as macro command prefixed with "$!".
 For example, if CW/Digi message contains $!SCRIPT1, it will execute script with name SCRIPT1.
 New contest supported: XE RTTY International Contest.
 Added band changes count for Multi/Single category in CQ WPX RTTY Contest.
 CTRL+SHIFT+F4 on the fly scenario/message editor wasn't working properly. Fixed. (TNX IK2NCJ)

Ver 2.2.8


 Band maximum time and minimum pause time implemented for some Italian contests. Config key = BAND_MIN_LIMITS (TNX IU3AZC)
 New contest supported: Old New Year Contest. (TNX YT3W)
 New contest supported: Popov Memorial Contest. (TNX YT3W)
 SARTG HNY RTTY Contest scoring fixed. DXCC multipliers wasn't counted. (TNX IU3AZC)
 WW PMC Contest. Changed list of multipliers according to new rules. (TNX S54X)
 New option added: Tools->Data entry->Enable grab call from decoder window.
 When checked, it will automatically grab last known (highlighted) call from digi mode decoder window.
 User can disable this functionality by unchecking it.
 In previous version it was always on.
 ALT+CLICK in digi decoder windows now adds call to partner stack.
 New contest supported: UBA PSK63 Prefix Contest.
 $TR macros wasn't implemented correctly when using digi modes. Fixed. (TNX IK2NCJ)
 CONTEST_FIRST_HOUR parameter in contest config file now accepts also minutes value, if specified. (TNX OK5MM)
 PTT sequence implemented. Choose PTT1, PTT2, PTT3 in port configuration to enable this functionality.
 PTT pins are executed in following sequence:
 1. PTT + delay for PTT delay ms
 2. PTT1 + delay for PTT seq delay ms
 3. PTT2 + delay for PTT seq delay ms
 4. PTT3 + delay for PTT seq delay ms
 Contest recorder buttons wasn't working properly in floating mode. Fixed. (TNX K6MR, IU3AZC)
 Footswitch (DSR) pin can be used to switch between Radio1/Radio2 input lines now. (TNX SJ2W)
 New contest supported: Cup of Russia CW. (TNX RU3DNN, RK3BX)
 HA DX Contest: contest rules was changed. Fixed. (TNX 9A1AA, 9A7R)
 NA Sprint SSB contest rule changes applied to new config. KH6 mult is added in it. (TNX K6MR)

Ver 2.2.7


 Code for opening windows in application is optimized. Now it should work much faster.
 CW/Digi keyboard - alternate messages shortcuts wasn't available. Fixed. (TNX HB9BUN)
 Worked DXCC window - in floating mode layout, it wasn't possible to change the continent. Fixed. (TNX IK2NCJ)
 World map window - title bar color selection option was missing in pop-up menu. Fixed. (TNX E77DX)
 Statistics window - controls wasn't resized properly when floating mode was used. Fixed. (TNX IK2NCJ)
 Bandmap list is now scrollable with mouse wheel. (TNX YU7RL)
 Toolbar functionality is finished now.
 Beam heading calculation bugfix. When worked qso with own country, own lat/long was reset to lat/long from qso. Fixed. (TNX W9PA)
 Partner window option "No band/mode filtering" wasn't restored correctly on opening. Fixed. (TNX IK2JUB)
 When using contest with separate periods and SO2R mode, if period was changed from R2 qso line, R1 qso line period wasn't changed. Fixed. (TNX ES7GM)
 DXCC exception database created to add some exceptions for DXCC determination when they aren't covered in CTY file.
 For example, it is used to distinguish between KG4 and K for KG4x, KG4xx and KG4xxx callsigns. (TNX IK2JUB)
 New log option available: Always show mode in QSO lines. If checked, it will make column with mode always visible, regardless of FIELD_MODE_VISIBLE 
 parameter in contest config file. (TNX XE2K)
 9A CW Contest wasn't scored correctly for outside 9A stations. Fixed. (TNX HB9BUN)
 OK DX RTTY Cabrillo QSO line wasn't align correctly. Fixed. (TNX 9A6SJZ, 9A7R)
 New contest supported: World Wide Iron HAM Contest. (TNX 9A7R)
 DARC XMAS contest - DOK multiplier wasn't calculated correctly. Fixed. (TNX DL2MDU)
 New radio supported: Yaesu FT-3000.

Ver 2.2.6


 When previous QSO was edited and saved, 10 min rule checking method was called.
 In this method, part of code to check if 10 min rule is needed for category was missing. Fixed. (TNX IU3AZC, IK2NCJ)
 If different CW speed for Radio1 and Radio2 was used, only last changed speed was saved and restored to both radios.
 Now changed to save each cw speed separately and restoring it correctly. (TNX IK2NCJ)
 Bandmap options "Enable single click selection" and "Display multipliers only" wasn't saved and restored properly. Fixed. (TNX IK2JUB)
 Commands->DX Cluster->Default comment option added. If set, this comment text will be added to each spot sent to DXC. (TNX 9A1AA)
 DXN files are now associated to DXLog.net.exe during installation. You can open log file directly with clicking on it. (TNX IK2NCJ)
 Migrated SQLite dll to version 1.0.94.
 ARRL 10m contest database added. (TNX W9PA)
 Configuration file caching added. Loading/closing application is now much faster.
 New contest supported: HB XMAS Contest. (TNX HB9BUN)

Ver 2.2.5


 $FREQID macro added. It will send frequency of Radio1 take from defined station in the network
 For example: $FREQIDRUN1 will take frequency from station with ID RUN1.
              $FREQIDMULT will take frequency from station with ID MULT. (TNX R9IR)
 Target file is now loaded automatically when log is opened if it was previously loaded. (TNX IK2NCJ)
 Radio RUN/S&P mode is now saved to and restored from current log. (TNX IK2NCJ)
 New bandmap option available: enable single click selection. When checked, single click at bandmap will 
 make spot selection and frequency change.
 New window available: Extra information. Shows extra information from XDT files.
 Check multiplier window - color wasn't set properly when changed from default value. Fixed. (TNX K6MR)
 Popup menu in floating windows mode wasn't shown on all windows correctly because focus was changed to main window automatically. (TNX K6MR)
 New bandmap display options available: Sun, Heading, Long path and Exchange. (TNX IU3AZC, K6ND, N1RR)
 Bandmap windows now shows also number of available spots, new spots, multipliers and points per band.
 Title bar color for each window can be changed now according to user preference.
 Extra information - new plugin is available: www.hamqth.com online lookup.
 New contest supported: RCWC Mini-test.
 TARA RTTY and 10M RTTY contest. RCVD field was set to numeric only. Fixed to accept alpha characters too. (TNX K6MR)
 New contest supported: ARRL 160m contest.
 New contest supported: INORC Contest. (TNX IK2JUB)
 DXC Announcements window: Multipliers only selection wasn't saved to and restored from config file. Fixed. (TNX IK2JUB)

Ver 2.2.4


 Status window now shows 10 minutes rule timers in different colors.
 Rearrange code to display 10 minute rule errors for multi/single stations.
 New option available: Options->Networking->Don't allow QSO logging if band change rule is broken.
 Checked by default. If 10 minute rule is broken, DXLog wouldn't allow to log such QSO.
 Error message will be displayed bellow QSO line. (TNX I4UFH)
 Added $NEXTSERIAL / $PREVSERIAL macro commands.
 New contest supported: Estonian local contest called ES-LL-KV. (TNX ES7GM)
 Radio/Ant status window is now resized correctly when using larger fonts and have over 4 antennas on one band. (TNX K6MR)
 Radio/Ant status window antenna selection can be done directly by mouse click on desired selection.
 New option available: Options->Networking->Show different active QSO line color during wait status.
 If checked, DXLog.net will change the color of new QSO line during wait period in status window.
 There are two different color, one for wait period until last minute, and another one for last minute.
 When wait status isn't active, qso line will have normal background color.
 Sked/Pass station. Numeric pad usage was disabled. Fixed. (TNX IK2NCJ)
 $FREQP, $FREQS, $FREQxx macros implemented. "xx" is band for search in the network.
 QTC data for sent QTC's wasn't correctly formatted in Cabrillo export (sent by/rcvd by callsigns where changed). Fixed. (TNX DF1QR)
 QTC frequency was reset to default if QTC was sent/received before QSO is logged. Fixed.
 Cabrillo export is now resorted to include QTC lines between QSO lines according to the time.
 $MK2R=x macro implemented. Send custom commands to microHAM device.
 New contest supported: Russian WW multi mode contest. (TNX YT3W)
 New contest supported: S5 local contest - KV PRVENSTVO ZRS. (TNX 9A4ZM)
 If DXLog.net can't find any device for Playing and/or Recording, MP3 configuration window was broken. Fixed. (TNX IK2NCJ)
 Rate window - new options available.
 Set global target qso rate. It will take this number as average qso rate for each hour of the contest and will
 compare current qso number with number calculated based on this number. And difference will be shown in rate window.
 Show projected score. This will calculate projected score at the end of the contest based on currently loaded target file 
 and current score. Calculation is done at minute level.
- QSY Wizard window added. When using HamCAP to check propagation data, if chart tab is used, QSY Wizard window will
  show possible QSY bands at current time, if HamCAP prediction for qso in that hour is greater of 5 percent.
  If not, it will show band labeled as SKED with UTC hour when maximum prediction is found.
 LZ DX Contest - added database for LZ stations exchange. (TNX R9IR)
 DXC Announcements window - optimized code for faster display refresh when lot of data is received from DXC.
 When floating windows mode was used, focus wasn't returned to main window if some of child windows was clicked. Fixed. (TNX K6MR, IK2NCJ)

Ver 2.2.3


 Some listview objects (status window, bandmap list window) flickered during refresh on WinXP. Fixed.
 Multi/Single QSY counter calculation code optimized.
 Added code to check if location of main screen is visible on some of screens/monitors attached to the system 
 when restoring location from config file during startup. If it isn't visible, main screen will be shown on
 it's default position assigned by OS.
 EU VHF/UHF/SHF contest. During QSO edit, band points was multiplied because one of the object properties wasn't
 copied correctly during qso edit. Fixed. (TNX 9A6C)
 FT-990 is now supported.
 When using AlternateCQ macro commands, sometimes first CW character was sent twice. Fixed. 
 Added 200ms delay When using $TR1 / $TR2 commands to switch TX radio to wait for interface to switch active radio.
 Macro processing in SSB mode using two radios wasn't implemented correctly. This was creating some blank line logging
 errors. Fixed now. (TNX K6MR, N6TV)
 WAE RTTY. QTC receive window isn't modal anymore, so received data can be clicked and transfered to QTC receive window.
 This also enable sending standard and additional messages by clicking buttons in decoder window. 
 Please note that if you want to use shortcuts defined in QTC receive window, it must be focused.
 Also, QTC group and number of qsos in QTC should be entered manually to activate fields in QTC receive window.
 ALT+K (Keyboard) RTTY sending was stucked when using 2Tone and buffer was empty. Fixed. (TNX K6MR)

Ver 2.2.2


 RAEM contest - Lat/Lon field max length had default value of 6 chars. Changed to 7. (TNX R9IR)
 New option available: Commands/Pass frequency. Set passing frequency for station passing.
 New option available: Windows/Skeds (ALT+B). Shows scheduled qso skeds.
 New option available: Commands/Take a sked (ALT+E). Adding qso sked in sked table.
 New option available: Commands/Pass a station (ALT+D). Passing qso to another frequency / station. QSO is added to sked table too.
 Status window now shows QSY frequencies for each station in network. 
 All sked changes (add new, modify, delete) are propagated through the network.
 Sked window is displayed automatically if it's not already opened when there are "near time" skeds in the table.
 Passing a station command will automatically popup sked window on all network stations if sked time is within 10 minutes boundaries from actual time. 
 World map window - when double clicked at task bar it was maximized. Fixed. (TNX DL8OBQ)
 Networking - code optimized, especially when UDP network type is used.
 Networking - propagating dx spots with QSX comment through network was causing adding additional "*" at the begging of callsign. Fixed. (TNX DL8OBQ)
 Worldmap day/night shadow problem fixed. 

Ver 2.2.1


 New option available: Options->Data files->Update database. This will update your local prefill database from currently opened log. (TNX W9PA)
 DARC 10m contest - adjusted Cabrillo QSO line output according to the rules. (TNX DK9TN)
 Rates window - new options available: Rates Units. (TNX I4UFH)
 INQP - stations working at/from county borders now can be logged in single QSO lines. Up to four county borders on both sides are supported now. (TNX W9PA)
 New contest supported: RAEM International HF Contest.
 Bugfix: click in radio 2 decoder windows on received data was sending data to first radio qso line. Fixed. (TNX K6MR)
 Bugfix: additional CW message shortcuts in CW mode were available only if technique was Advanced SO2R. Fixed. (TNX K6MR, N6TV)
 DOK database refreshed, for usage in WAG contest. (TNX DK9TN, DK8ZZ)
 Winkey - use of speed pot on device is now enabled. 
 Callsign background in bandmap view is now changed when radio is at same frequency (+/- bw defined in bandmap properties). (TNX K6ND)
 Time ON/OFF calculation wasn't quite correct because of milliseconds rounding. Fixed. (TNX N6TV)
 Sprint insert key logic wasn't implemented for digi modes. Fixed. (TNX K6MR)

Ver 2.2.0


 Key remapping - when CTRL/ALT/SHIFT was used in key combination to remap to some other key, status of key was resetted to non pressed. Fixed. (TNX N6TV)
 Key remapping - when two keys function was switched between them, loop was created. Fixed. (TNX N6TV)
 Using additional CW/Digi messages in digi modes was setting tx in manual TX mode (as it is in Keyboard - ALT+K mode). Fixed. (TNX R9IR)
 Yaesu FT-857 CAT protocol should be fixed now to work on same way as FT-897.

Ver 2.1.8


 New shortcuts/menu options available:
 CTRL+ALT+UP   - grabs first valid upper spot and sends a frequency to inactive VFO.
 CTRL+ALT+DOWN - grabs first valid lower spot and sends a frequency to inactive VFO.
 Menu options are: 
 Operating->Bandmap->Grab first valid upper spot to 2nd VFO
 Operating->Bandmap->Grab first valid lower spot to 2nd VFO
 Starting point for frequency is inactive VFO frequency. In case that inactive VFO is on different band then active one,
 start point will be the frequency from active VFO, so band of inactive VFO will be changed to same as active one. (TNX I4UFH)
 RDA Contest - ADIF export changed to CNTY/STATE. (TNX E73Y)
 RDA Contest - added calculation for Russian "/P" stations. (TNX UA6AA)
 LZ HF Field - new window available - worked callsigns. Shows which callsigns are worked during the contest with information
 about when new qso with same station will be available. (TNX 4O3A)
 Band changes counters added for multi/single and multi/two categories in CQ WW RTTY. (TNX EI3JE)
 New option added: Tools->Data entry->Prefill values
 Callsign value - when new qso row is initialized, it is automatically prefilled with desired value. (TNX 4O3A)
 OTRSP device - AUX pins wasn't switched correctly. Fixed. (TNX K6ND, N1RR)
 NA Sprint - own multiplier wasn't counted. Fixed. (TNX W9PA)
 All Asian - multiplier window was broken when some special prefix was worked (for example HS50). Fixed. (TNX 9A2NO)
 WAE DX Contest - added some optimization in QTC receive window. QTC's also can be edited after save.
 Azimuth info shown in Check multiplier window was wrong when gridsquare was filled at config screen.
 Bugfix: cat command for SSB mode change was based on current band, not new one, when band was changing with frequency typing in callsign field.
 Because of this, when band was changed for example from 40 to 20m  mode was set to LSB (current band = 40m) instead of USB (new band = 20m). Fixed. (TNX W9PA)
 Bugfix: worked DXCC window font size wasn't correctly restored when log is opened. Fixed. (TNX W9PA)
 New option available in Radio config screen: Use CI-V (don't poll). 
 This option will enable usage of CI-V transceive mode for ICOM radios, instead of standard radio cat polling. 
 In previous versions enabled CI-V transceive mode on some radios caused CAT communication error which disconnects the radio until port is opened again.
 New multipliers added for contest KT KUP Srbije. (TNX YT3W)
 Bugfix: config file for KT KUP Srbije missed Cabrillo operator category for NON-YU category. Fixed.
 SAC Contest: added serial number definition for all categories.
 Single OP 2 VFO mode (SO2V) is now enabled.
 Rate window - qso and multiplier worth informations added.
 DXCluster data manipulation code is completely rewritten to optimize performance.
 Bandmap list sorting options added.
 New option available: Options->Interface specific options->Prevent TX if another radio on same band.
 If checked, it will prevent TX if we found another radio (Radio1 vs Radio2 in SO2R mode, or any networked radio if network is enabled) is on same band. 
 Currently, in network mode, we are comparing our TX radio band with BAND field in network list. 
 Please note that in case of network failure, we can't determine another radio band, so this should be just temporary solution and some hardware solution
 will be much safer for such scenarios. (TNX K6ND, N1RR)
 New shortcut added: comma (',') - brings popup window which allows to enter a list of callsigns which should be added to call stack (partner window).
 If callsign field is empty, first call from call stack will be automatically added to callsign field. (TNX DF1QR)
 New shortcuts available: CTRL+ALT+F1..F12 (or AltGr + F1..F12). This will send additional CW/Digi messages (1..12 - check additional message window - ALT+C). (TNX DF1QR)
 Added buttons to access additional messages also at Digi mode decoder windows.
 Starting repeat loop by pressing F1 key is now disabled when station is in S&P mode.
 In digi mode contest when audio frequency correction was used, ALT+F4 QSY'ed to wrong frequency. Fixed.
 ALT+K button in digi mode decoder windows didn't start keyboard mode. Fixed.
 Keyboard (ALT+K) message sending in digi mode was delayed between characters. Fixed.
 Own callsign isn't highlighted anymore in decoder windows. This will prevent to grab it as last known callsign.
 Clock window - added new background color type (S&P background). Each time when focused radio will change mode to S&P,
 background color of clock window will be changed to this color.
 Worldmap color had wrong colors for day/night under some circumstances. Fixed. (TNX IZ4AFW)
 Added 100 ms initialization delay, to allow Winkey device to initialize when powered from COM port. (TNX OK4BX)
 Redefine keys wasn't working properly when multiple key combination was remapped. Fixed. (TNX OK4BX)
 New contest supported: Russian WW Digital Contest.

Ver 2.1.7


 Bandmap data display was broken when callsign with unrecognized DXCC was received from cluster.
 New contest supported: SCC RTTY Contest.
 Fixed some problems with bandmap scrolling for WAE contest. Available QTC number was copied to callsign field. (TNX DK8ZZ, 9A1AA)
 ADIF export - it's possible to add QSO comment for all qsos during ADIF export procedure - for example contest name. (TNX DK8ZZ)
 ADIF export - ADIF_KEYS config key - 3rd parameter available now. If specified, it contains Regex expression to evaluate if field
 will be exported for particular QSO. 
 See RDAC contest definition for first usage example (RDA field is exported only for UA, UA2, UA9, R1FJ and R1MV stations).
 RDAC contest - received RDA value is exported in ADIF now. (TNX 9A2NO)
 New contest supported: SCC RTTY Contest.
 Added prefill database for US/VE stations in CQ WW RTTY contest config. (TNX EI3JE)
 Fixed some issues when bad data was received from CAT interface, mostly due RF problems. 
 Network status info window is cleared immediately when network is disabled. (TNX I4UFH)
 Bug fix: dx cluster traffic from clusters connected in network wasn't visible in DXCluster window. Fixed. (TNX I4UFH)
 Show network stream option is added in drop-down of DXCluster window. 
 If checked, it will show traffic from network connected clusters. By default it is checked. (TNX I4UFH)
 DXCluster window now shows traffic from network in different color.

Ver 2.1.6


 New contest supported: NRAU NAC Open V/U/SHF Contest.
 New contest supported: NRAU NAC 10M Contest.
 New contest supported: IARU Region 1 Fieldday (RUS). (TNX UA6AA)
 Fixed perfomance issues when huge amount of spots are received from DXCluster (or Skimmer).
 New option available: Tools->Data entry->Use INSERT mode in RCVD fields.
 Switch to INSERT mode instead of OVERWRITE mode in all RCVD fields. Default is not checked.
 DXCluster reconnect functions are implemented now. 
 If DXCluster can't be connected, DXLog.net will try to establish connection again each 30 seconds.
 In case of inactivity, if there isn't any data received from DXCluster in period of 120 seconds, DXCluster
 is disconnected and reconnection procedure is started.
 EDI export is expanded to include bonus for WWL's worked (CWWLB tag). (TNX RO2F)
 EDI info tags are now prefilled with info from Contest config screen. (TNX RO2F)
 Bandmap is now automatically expanded to enable visibility of higher frequencies. (TNX RO2F)
 Final score calculation custom formula regional setting wasn't set to "en-US". Fixed. (TNX KB9S)
 Goto QSO window (CTRL+G) was accidentaly replaced by Target QSO per hour window. Fixed. (TNX IK2JUB)
 IARU R1 DARC contest config file. Cabrillo line definition fixed according to the rules. (TNX IK2JUB)
 HQ database lookup added for IARU HF Championship and WRTC 2014 Contest. (TNX SA6AQP)
 VHF/UHF/SHF contest definition can used bonus points per band. Added in EU V/U/SHF definition.
 New networking options available. UDP type broadcasting can be used now for local network. Also this
 can be used in combination with client/server infrastracture which enable usage of multiple subnets, routing etc.
 OTRSP compatible devices are supported now. Currently tested with YCCC SO2R+ box. (TNX OE1EMS/E77DX, S58A).
 Available QTC number is now visible in Bandmaps. (TNX IZ3EYZ).
 Hide dupes and invalids are now separated as two choices in bandmap popup menu. (TNX IZ3EYZ)
 Morse Runner integration implemented. You can now simulate contest if Morse Runner is active.
 Simulation is started with menu choice: Tools->Data entry->Enable Morse Runner simulation.
 PageUp/PageDown can be used as rit control (Up/Down arrows in Morse Runner).
 COM object called DXLog.net.COM.COMInfo is now available. It provide some information need for integration with 
 external applications. First implementation will be used for adding new plugin for ACOM Tools application, to send
 frequency data to ACOM 2000A amplifier. COM object can easily be accesed from simple vb or java script, or another 
 application.
 New contest config key available: ADIF_KEYS.
 It can be specified multiple times. It's used to specify ADIF export definition. Contains key+value pair, separated by ";".
 Key = ADIF key. Value = C# expression for evaluation. $VALUE in expression contains reference to DXQSO object.
 Export to ADIF for IOTA contest now exports IOTA reference too. (TNX 9A2NO, DK8ZZ)

Ver 2.1.5


 Load contest at startup was broken because country file is loaded too late in previous version. Fixed.
 Problem with WPX determination for calls such as 7QNL fixed. (TNX UA6AA)

Ver 2.1.4


 CH canton removed in Helvetia contest. (TNX HB9ELV)
 Volga contest config file serial number alignment was left, instead of right. Fixed. (TNX RW4NW)
 SCP database lookup from external database is now disabled for WRTC contest type. Only "In log search" is allowed.
 New contest config parameter - DXCC_DB_USE_ARRL_LIST. Allows to use ARRL country list instead of CQ country list.
 This means that all countries from CTY.dat file with main prefix starting with '*' sign will be ignored.
 UA2 QSO party - 40m band filter was wrong in points calculation in config file. Fixed. (TNX 9A1AA)
 VC 2010 RTM check removed from setup because of problems with Win8.1. (TNX UA6AA, E73Y)
 Information on targets tab in statistics window wasn't refreshed properly when new qso was logged. Fixed. (TNX 9A1AA)
 Target file export fixed to include hours with zero qsos. This is needed to properly display hourly comparisions. 

Ver 2.1.3


 Gray line map now shows grayline twilight zone (civil or nautical). Also, it can show graylight zone based on D and F layer calculations. (TNX N6TV)
 New contest supported: New England QSO party (NEQP).
 New contest supported: 7th Call Area QSO party (7QP).
 INQP config adjusted to accept entries from 7QP and NEQP. (TNX W9PA)
 New contest supported: Russian Championship. (TNX YT3W)

Ver 2.1.2


 During QSO saving in ESM mode, CW keyer was sending first letter of previously logged callsign before "TU" message. Fixed. (TNX YU7RL)
 Option "Tools->Data entry->ESM mode change focus on $LOGGEDCALL macro" state wasn't properly restored after restart. Fixed.
 DXCluster window opening (ALT+O) was broken if stream history logging was active under some circumstances. (TNX YU7RL)
 New contest supported: Indiana QSO party - INQP. 
 Grayline world map is now available.
 Sunset/Sunrise time calculation algorithm changed.
 Added sunset/sunrise colors to clock window.
 New contest supported: UA1DZ Memorial Cup.
 When Shift+Fx key was pressed while recording was already in progress, error exception was shown. Fixed. (TNX DF1QR)
 Due to moving log to SQLite format, QSO times were converted to local time zone when log was loaded, instead of UTC. Fixed.

Ver 2.1.1


 DXN file format is now changed to SQLite database format.
 QTC file is now included in DXN file, separate file isn't needed anymore.
 ADIF export: OPERATOR field is visible in operator logged during qso logging. (TNX DF1QR)
 Repeat timer wasn't refreshed when changed with RPT text command. (TNX JG1VGX)
 Fixed some problems with dx cluster stream / spot logging. Code works much faster now.
 ALT+Y and CTRL+F3 shortcuts now changing station type for active qso line.
 If active line is new qso line, station type is changed for all new qsos. (TNX OK1RI)
 New text commands added: RUN, MULT, RUN1, RUN2 - change station type according to text command.
 Cabrillo file is now sorted during export according by time of qso, sent serial number (if contest uses one) and qso id.
 Band changes are now calculated together with rates when scrolling through the log. (TNX OK1RI)
 URAL Cup contest - sent nr field was hidden. Fixed. (TNX R9IR)
 New contest supported: DIG QSO Party.
 Load/Export target files options added.
 New statistics options available. Targets are now visible in Statistics window and can be compared with actual log.
 Statistics by continent available.
 Copy as image option added to statistics and summary windows.
 Copy as text option added to statistics window. 
 CQ MM DX contest config live score contest name parameter added to allow posting of score to cqcontest.net. (TNX PY3KN)
 Helvetia contest config line to calculcate HB->DX qso correctly. (TNX HB9DUR)
 Frequency warning file added for Helvetia contest. (TNX HB9DUR)
 File->Export->Summary file option added.
 During Cabrillo export, user is prompted for Summary file creation.
 When ALT-F4 (return to CQ freq) command was issued in case of Yaesu FT2000/5000 radio, sub vfo (VFO-B) tx was always activated. Fixed. (TNX RZ3AZ)

Ver 2.1.0


 Number server was broken because of changes regarding number reservation per station type. Fixed during WPX SSB.
 If number server is used, when callsign is double clicked in bandmap or dxcann window, number isn't reserved automatically anymore until spacebar isn't pressed.
 It doesn't depend on station type anymore. 
 Bugfix: QSO editor. When some space characters after received report were deleted, exception was raised after moving focus back to Rcvd field.
 LOCATION tag in Cabrillo added for CQ WPX Contest.
 CATEGORY-OVERLAY is removed if overlay value is empty.
 Gab window is now hidden automatically after 15 sec delay, if it was opened automatically when GAB message was sent/received.  (TNX NQ4I)
 EA PKS63 and EA RTTY contest. Received exchange was copied from previous qso always. Config changed so copy works only for qsos with EA/EA6/EA8/EA9 stations. (TNX 9A6SJZ)
 Yuri Gagarin cup - config changed according to the rules for 2014 - KEDR stations. (TNX IK2JUB)

Ver 2.0.25


 Contest recorder - drop down menu option MP3 Configuration wasn't implemented. Fixed. (TNX DK8ZZ)
 New interlock options added. Interlocking is now possible between multiple stations.
 It can be defined fixed (with multiple station IDs) or dynamically, based on status info received in network.
 Possible options are:
 1. Interlock with station(s) on same band
 2. Interlock with station(s) on same band+mode
 3. Interlock with all stations visible in status list
 Dynamic station list is built when TX is requested from info available in status list in that point of time.
 In multi op environment, when number server is used, number is automatically reserved when callsign bandmap or dx announcements window is 
 double clicked only if station type isn't Mult or Support.
 New contest supported: OK/OM DX SSB contest. (TNX OK1RI)
 Bugfix: when voice message was recording and play message was started before recording is stopped, DXLog.net was crashed. Fixed. (TNX W9PA)
 Bugfix: K3 SPLIT CAT command wasn't implemented properly. Fixed. (TNX W9PA)
 Bugfix: Radio internal DVK usage was broken. (TNX IK2NCJ, IK1HJS)
 Parsing DX spot comments for QSX frequency added. DXLog.net now looks for "QSX" text in comment and trying to parse valid frequency.
 If frequency is found, spot callsign will be marked with "*" before callsign and double click on such spot will change radio to split mode
 immediately. Valid QSX in comment can be full frequency or just KHz part. For example: QSX 3662 or QSX 662 will set split frequency
 to 3.662 in both cases. (TNX W9PA)
 Bandmap callsign color for multipliers was wrong for some contests when contest period was changed and received data wasn't copied
 by default from previous qsos. In that cases, DXLog.net needs to find data from guess database. Fixed. (TNX YT3W, 9A1AA, YU7RL).
 Warning message added when duplicate contest definition is found in AppData folder. Only first file with definition is loaded,
 any other file with definition for same contest name will be discarded and user will be notified about these files.
 New option available: Edit->Edit serial number. This allows to edit serial number for previous or current QSO entries. (TNX YU7RL).
 Sent serial number field for previous qso is now accessible by pressing TAB key, so user can easily edit sent serial number for previous qso. (TNX N6TV)
 Bugfix: cat command for SSB mode change was based on current band, not new one. Because of this, when band was changed from 40 to 20m
 mode was set to LSB (current band = 40m) instead of USB (new band = 20m). Fixed. (TNX W9PA)
 CQ WPX band changes rule for multi op stations (M/S & M/2) fixed according to the rules.
 JT65 mode added to DXpedition contest definition. (TNX E70T)
 Bugfix: DXCluster list editor exception happens when duplicate entries exists in cluster names. (TNX K3UK, N6TV)
 $ALTERNATECQ / $ACQ macro fixed, together with new definition for AlternateCQ scenario. (TNX IK2NCJ)
 CQ-MM contest definition fixed according to the rules. (TNX VE2EBL)
 SMR multiplier added to His Majesty The King of Spain contest. (TNX YT3W)
 New contest supported: BDM RTTY WW Contest. (TNX YT3W)
 New contest supported: QRP HF RTTY Contest. (TNX YT3W)
 New contest supported: FOC BW QSO PARTY. Added FOC members database. (TNX F5IN)
 Ctrl+Shift+Fx key now opens message editor (or on the fly scenario editor), beacuse Shift+Fx in SSB mode starts message recording. (TNX IK2NCJ)

Ver 2.0.24


 ADIF import was broken when dxcc of callsign wasn't recognized correctly or callsign contains "EOR" text. (TNX E73Y)
 NAQP RTTY - RCVD field length expanded to same length as NAQP. (TNX KB9S)
 Cabrillo export definition checking added to prevent exceptions from export routine if Cabrillo line definition is missing in config file. (TNX DL1MAJ)
 VHF guess database lookup was broken after SCP & database optimization. Fixed. (TNX DL1MAJ)
 Contest recording is added.
 MMVARI form closing was causing runtime error. Fixed.
 Upgraded ObjectListView objects to v2.7.0.
 Different color for double multiplier is now available in Bandmap and DXC Announcements windows. (TNX IK2JUB)
 Hide dupe / invalid qsos and Display multipliers only settings are now saved in config and restored when log is opened / created.
 CWT config changed (new bands added). (TNX SA6AQP)
 CWOps database updated. (TNX SA6AQP)

Ver 2.0.23


 Digital modes recognition from bandplan when spot is received from DXC fixed. (TNX W9PA)
 Worked prefixes window was broken under some circumstances. Fixed. (TNX W8AKS)
 New rules for EA RTTY and EA PSK63 contest implemented. (TNX EA4ZK)
 Bandmap editor implemented. Check Bandmap properties in radio 1 or radio 2. 
 There are 10 different bandmaps available, default one which comes with installation and 9 which can be
 saved by user.
 Check partials and Check N+1 display order is changed now. N+1 algorithm is fixed.
 This windows now shows data first in following order:
 1. already worked calls, but not dupe
 2. dupe calls
 3. all other calls
 In each of these three groups, callsigns are sorted alphabetically.
 SCP is now rewritten to optimize performance. Regex queries removed.
 Cabrillo "LOCATION" tag added for ARRL contests.
 Databases for YU and E7 local contests are refreshed now. (TNX YU7RL)
 Live score auto posting setting is now remembered in dxn file and restored when file is opened.

Ver 2.0.22


 Wednesday MinTest Cabrillo output fixed according to the rules. (TNX RZ3AZ/UA5C)
 QTC network synhronization didn't worked properly for WAE RTTY contest.
 New contest supported: WRTC 2014.
 New option available: Commands->Live score->Use UDP broadcast. If checked, score will be broadcasted to selected 
 IP address/port instead of making post via http, as requested by WRTC 2014 committee.
 OK/OM DX Cabrillo fixed according to format requested by contest robot.
 WWPMC contest config check was broken. Fixed. (TNX 9A4CD)
 Multiplier check routine from recinfo field was broken and call wasn't added to bandmap when received
 from dxcluster. Fixed.
 NAQP rcvd field expanded to support longer names. (TNX W9PA)
 NAQP config fixed by the rules. (TNX W9PA)
 Network time server was creating time info packets with local time info, instead of UTC. Fixed now.
 Regex processing routing had bug when processing RCVD field under some conditions. Fixed now. (TNX IK2NCJ)
 New contest supported: BALKAN HF CONTEST. 
 New contest supported: Tesla Memorial HF CW Contest.
 Marconi Memorial HF CW Contest config file changed according to the new contest rules. (TNX IK6BAK)
 Multiplier count for NA Sprint contest fixed according to the rules. (TNX W9PA)
 Added prefill database for NA Sprint. (TNX W9PA)

Ver 2.0.21


 FileStream buffer wasn't correctly flushed to disk, which caused corruption of DXN file. Fixed now.
 OK/OM DX Cabrillo export fixed error with received field.
 New contest supported: WAEDC RTTY.
 Fixed some bugs in QTC Send screen. (TNX R9IR)

Ver 2.0.20


 New contest supported: JARTS WW RTTY Contest. (TNX 9A7R)
 New contest supported: Kirov region cup. (TNX RM4N)
 VGE SPRINT contest fixed according to the rules. (TNX EA4ZK)
 Rate display refresh was broken when entering new qso. It was only refreshing during log scrolling. Fixed.
 Fixed WAG Cabrillo import problem. (TNX DF1LX)
 ARRL Sweepstakes: added prefill database. (TNX W9PA)
 New contest supported: OH local contest Viitosten Syysottelu. (TNX OH6XX)
 New contest supported: DARC 10m DIGITAL Contest (Corona). (TNX YT3W)
 New contest supported: ARRL RTTY Roundup. (TNX YT3W) 

Ver 2.0.19


 Send spot (ALT+F3) window wasn't shown if DXCluster was disconnected but network connection was active. Fixed. (TNX NQ4I)
 Partner window callsign double click and popup delete and delete all function wasn't implemented. Fixed. (TNX G4BYG)
 New macro commands supported: 

$SPACEBAR - same as $SPACE (press spacebar in currently active field) $CHECKCALL - move focus to callsign and press spacebar $GUESSEXCH - try to guess exchange, focus stays in currently active field $LOGQSO - silently save QSO (useful in ESM + S&P mode) $CTRLPLUS - same sa $LOGQSO $FOCUSCALL - move entry focus to Callsign field $FOCUSRCVD - move entry focus to Rcvd field $FOCUSREC1 - move entry focus to RecInfo field $FOCUSREC2 - move entry focus to RecInfo2 field $FOCUSREC3 - move entry focus to RecInfo3 field $FOCUS1 - change Focused radio to Radio 1 $FOCUS2 - change Focused radio to Radio 2 $SWAPFOCUS - change Focused radio to opposite Radio $GRABPARTNER - grab next call from partner window into callsign field in current entry line

 New bandmap properties available:

- Bandmap entries added by the operator - Clear log fields: Always, Never, When dupe. Defines if log entry will be cleared or not when entry is added to bandmap manually. - Search & Pounce options - Wipe QSO - Log entry will be cleared if radio frequency is changed - Populate bandmap - Current log entry will be added to bandmap if radio frequency is changed - Only if callsign looks valid - bandmap will be populated if callsign looks like valid callsign - Frequency change threshold - defines for how many Hz radio frequency needs to be changed to activate previous function - Send spot automatically when QSO is logged If checked, when radio is in S&P, DXC spot will be automatically send to DXC when QSO is logged.

 New contest supported: EA local contest - Concurso Nacional de Sufijos (CN de Sufijos)
 Bugfix: Bandmap spots (list data) wasn't refreshed always when band was changed, because radio band property was changed
 after event was raised. Fixed. (TNX IK2NCJ)
 WAG contest: added warning messages in warning file type (see wag_warning.txt in database directory). (TNX DL8MBS)
 New option available: Tools->Data entry->Enable CW Cut Numbers Translation.
 When checked and if RCVD field accepts only numeric characters, RCVD field will accept A, N, T, E & U characters also.
 These five characters will be translated druing QSO save procedure into: 1, 9, 0, 5 & 2. (TNX N6TV)
 New contest supported: EA local contest SPRINT VGE. (TNX EA4ZK)
 New window available: Operating info. Shows operating data information such as Radio1/2 mode, RUN/SP mode, TX/RX status, listening
 mode status, CW WPM speed etc.
 Radio1 & Radio2 WPM speed can be defined for each radio if Options->CW->Enable different R1/R2 speed is checked. Default is checked.
 New text commands available: 

- NOSYNCCW - enable different R1/R2 speed (no CW speed synchronization) - SYNCCW - disable different R1/R2 speed (CW speed for R1 and R2 are synchronized) - SYNCSPEED - set opposite radio CW speed to same value as focused radio CW speed

 DOK database new version included. (TNX DK5TX)

Ver 2.0.18


 Interlock - New option added: "Last one wins if msg is" 
 If checked, this will interrupt interlocked radio tx when msg on the air is one of selected messages in 
 "If is/not msg" drop down items.
 CQP_db.txt prefill database added in distribution. (TNX W9PA)
 Callsigns from database files are now shown in Check partials and N+1 windows even if they don't exists in SCP file.
 If time delimiter in regional settings was different than ":", exception was raised. Fixed to accept any delimiter. (TNX IK2NCJ)
 Network partner mode is now supported.
 TRC contest prefill database added. (TNX F5IN)
 New option available: ESM mode change focus when LOGGEDCALL macro sent.
 If checked, $SPACE macro will be activated each time when $LOGGEDCALL macro is sent and ESM mode is active.
 Default is unchecked.
 OmniRig com object wasn't release properly on application close. Fixed. (TNX N6TV, JG1VGX)
 Some Yaesu models didn't display split mode properly in bandmap indicators. Fixed. (TNX JG1VGX)
 Digi mode freq correction was wrong in case of PSK modes when LSB mode was used on radio. Fixed. (TNX DK8ZZ)
 Bandmap freq display was too big when using large fonts in Windows. Fixed. (TNX 9A3XV)
 Automatic RUN/SP mode switching is now available. You can enable/disable this with menu option
 Tools->Data entry->Enable automatic RUN/SP selection or by text commands (AUTORSP/AUTORSPON and NOAUTORSP/AUTORSPOFF). 
 When enabled, it will switch DXLog to SP mode when you change frequency for more then 200 Hz from CQ frequency.
 When you are back within 200 Hz of CQ frequency, you will be switched back to RUN mode.
 If you change RUN/SP mode manually, this function is disabled until first message (F1..F7, INS, PLUS) isn't sent.
 By default, this isn't enabled. (TNX 9A3XV)
 Exchange guessing logic fixed. Now it always set field flags to unchanged when they are prefilled from previous qso or
 callsign databse. (TNX N6TV)
 When callsign was double clicked in bandmap or announcements window and DXLog should change frequency and mode,
 order of CAT commands was wrong. Mode command should be sent before frequency command. Fixed. (TNX E77DX/OE1EMS).
 RIT functions are now available from DXLog.net. SHIFT+UP, SHIFT+DOWN and SHIFT+DEL shortcuts have such functions.
 SHIFT+DEL clears RIT. SHIFT+UP/DOWN moves ritoffset 10 Hz (ore one step) down and up. Please note that SHIFT+UP moves
 rit offset in minus direction to work in same way as CTRL+UP which grabs first upper spot from band map (lower frequency).
 $13 macro added. This will send carriage return (CR) character in digi modes.
 New options available in Radio setup screen:
 ICOM CI-V address: you can change default CIV address for ICOM radio here if needed.
 Use radio internal DVK:  if checked, DXLog.net will send command to radio to start playing prerecoder message in radio internal voice keyer.
 Use CAT PTT command on phone: if checked, when mode is phone, CAT tx command will be sent to radio to start TX.
 Stopping the message (escape key) when working in Advanced SO2R mode now works on the following way:
 1. If listen mode is stereo ($R1R2) when esc is pressed, listen mode will stay stereo.
 2. If listen mode is mono ($R1R1 or $R2R2) when esc is pressed, listen mode will be changed to the mode which was active at message start. (TNX N6TV)
 F11/ALT+W (wipe) function was stopping REPEAT mode. Fixed. (TNX N6TV)
 CTRL+G function didn't set properly active qso line when moving in the log. Fixed. (TNX N6TV)
 New options available: Tools->Message editors.
 - Enabled SO2R scenario on the fly editor - if checked and operating mode is advanced SO2R, editor for standard message (SHIFT+F key)
   will show also active SO2R macro lines for radio1 and radio2, so you can edit it quickly without opening full scenario editor.
 - On the fly editor focus on scenario line - if checked, when on the fly editor window is shown, line with focus will be radio 1 or
   radio 2 scenario (depends if user pressed SHIFT+F key in when radio 1 or radio 2 has focus). If not checked, standard cw message

line will be focus. Of course, user can change focus in the editor screen by pressing on TAB - SHIFT/TAB key. (TNX IK2NCJ, N6TV)

 New shortcuts available: 

ALT + UP/DOWN - changes radio frequency for 10 Hz SHIFT + ALT + UP/DOWN - changes radio frequency for 100 Hz

 Bandmap "jumping" when spot is clicked is now fixed. This was happening because frequency was set to radio object and sent to CAT.
 Now, if radio object exists (cat mode is active), frequency is just send to CAT, and when received from radio, it is changed on
 the screen. If CAT is not used, frequency will be just changed in bandmap.
 New option available: Operating->Carrier (CTRL+T). Allows you to tune the radio.
 Bug fix: COPYLOG and COPYLOGCLEAR functions were reversed. Fixed. (TNX N6TV)
 Bug fix: no word space is sent between logged call and serial no, for early QSOs (1-9). (TNX N6TV)
 Bug fix: CTRL+TAB/CTRL+SHIFT+TAB implementation was wrong when focus was on radio 2. (TNX N6TV)
 Bug fix: ESM mode. Now sends correctly exchange when in S&P mode. (TNX N6TV)
 Bug fix: old spots loaded from history file. Fixed, now loads only spots not older then 30 minutes. (TNX N6TV)
 Bug fix: Check Callsign window doesn't update until you hit spacebar. Now updates immediately when match is found if auto exchange guessing is on. (TNX N6TV)
 Bug fix: After logging a QSO with PLUS, that callsign didn't immediately show up in the Check Mult window on the just-logged band. Fixed. (TNX N6TV)
 Bug fix: Hitting [Plus] when a QSO line is completely empty displayed red error message "Callsign needs at least one number". Fixed. (TNX N6TV)
 Bug fix: F7 (sending a question mark) didn't *immediately* halt a repeating CQ. Fixed. (TNX N6TV)
 Bug fix: For CQP, *Pts* column wasn't properly centered under the heading.  *Stn* column also off by 1. Fixed. (TNX N6TV)
 Bug fix: DB file loader didn't ignore comments. Fixed. (TNX N6TV)
 Bug fix: Repeating CQ delay timer settings wasn't saved in config. Fixed. (TNX N6TV)
 Time ON/OFF calculation fixed to match ARRL Sweepstakes / NAQP rules. (TNX N6TV)
 Bug fix: Cursor width wasn't recalculated when log font was changed. Fixed. (TNX N6TV)
 New contest supported: Ten-Meter RTTY Contest. (TNX YT3W)
 New contest supported: TARA RTTY Melee Contest. (TNX YT3W)
 New contest supported: NRRL Field Day. (TNX YT3W)
 New contest supported: Arktika Cup. (TNX YT3W)
 New option available: Options->Automatic backup. If automatic backup is enabled, it will create copy of log file at chosen location
 every XX minutes. Period is chosen by user. Also, LGS formatted file can be created on same location during backup process.
 Automatic backup is run in background thread, so it doesn't stop main thread from usual work. LGS file created during automatic backup
 process is also created in same background thread.
 New option available: File->Export->Log search format. Export currently opened log in LGS formatted file.
 WAG Contest outside DL: Worked German districts window wasn't enabled. Fixed. (TNX EA5FQ)
 New contest supported: Makrothen Contest. (TNX YT3W)
 OK/OM Contest prefill database added. (TNX EA5FQ)
 HamCAP integration implemented: CTRL+P now launch HamCAP application for callsign typed in callsign field. (TNX N6TV)

Ver 2.0.17


 If you hold down Control key during application start, it will be possible to override some settings remembered in
 application config file when application was started previous time (size, opening last log automatically etc).
 "~" sign can be used in messages to concatenate multiple macro (or macro and text) in one word (without spacing between 
 commands or commands and some text)
 New option added: Options->CW->Add spacing when stacking messages.
 If checked, when you stack couple of messages during CW keying, DXLog.net will insert space character between each message
 automatically. Default is unchecked.
 Other standard and additional messages now can be called as macro in additional messages when keying from ALT+C screen.
 If WinKeyer was enabled on port, but serial port didn't exists, exception was raised. Fixed. (TNX YT3W)
 New option available: File->Clean log.
 You can clean log file from qsos with yourself, Dupe qsos or remove /QRP extensions from qso.
 Fixed MMVARI, MMTTY and 2Tone modes now. It should work OK for FSK and AFSK modes. (TNX W4TV).
 MMTTY and/or 2Tone external process was started without setting working directory which caused a problem with
 .ini file config saving in SO2R operating mode. Fixed. (TNX N6TV)
 New option added: File->Export->Text file.
 Log file can be exported in simple txt tab delimited file which can be used for further analysis.
 FT-1000D supported added. (TNX EI3JE)
 RTTY FSK mode is now supported in MMVARI decoder.
 New contest supported: RSGB UKAC 6/4/2m & 70/23cms. (TNX 2E0SQL).
 New options added in status window. You can show/hide some columns, as well as change sorting method. (TNX NQ4I)
 New transceiver supported: TenTec Orion. (TNX NQ4I)
 All bands/periods state is now remembered in each of the Worked multipliers windows. (TNX N6TV)
 Radio Ant/Status window now shows also more interlock information. You can see which station is blocking you and
 what message is sent on that station. In case it is manual tx request (for example footswitch requested), msg is
 shown as MAN (manual). Also, if tx and interlock blocking is requested by CW/RTTY keyboard, msg will be shown as
 KEYB. 
 Bugfix: TX/RX switching was broken when using DSR COM port switch for PTT (footswitch). Fixed now.
 Number server / local number synchronization is fixed now. Successfull number reservation is now also shown in status
 bar in main form.
 If log is opened and File->New was clicked, active log was closed after config screen was filled. On slower computers
 closing procedure wasn't handled properly and opening of new log was broken. This was changed on the way that user is
 warned that log is prompted to close active log before continuing with new log creation procedure. (TNX 9A7R)
 New bandmap option added: Show network stations.
 If checked, network stations position will be visible in bandmap. Station ID is also shown.
 ICOM CI-V protocol changed to support radio polling.

Ver 2.0.16


 Additional space character between letters was added when using CW/RTTY keyboard (ALT+K). Fixed now. (TNX G4BYG, XE2K)
 Regex checking for valid callsign/rcvd entry was added when callsign/rcvd was selected by clicking in digi mode 
 decoder RX window.
 Improved callsign regex validation in digi mode decoder rx windows.
 If worked callsign is same as callsign entered in contest config screen, QSO is automatically marked as invalid.
 It will be possible to delete such qsos later with clean log option from menu.
 SCP search can be started after 2nd character in callsign. Default is after 3rd character. See Check partials form,
 drop down menu. (TNX N6TV)
 New CW/RTTY macro commands added: 
 $QSOB4WIPE - if qso is dupe, sends QSOB4 message and clear current qso row
 $CLEARRIT  - clear RIT on currently active radio (works on radio which supports this command). (TNX N6TV, DF9DD)
 New option added: Options->CW->Speed limits. You can set minimum or maximum CW speed. Default min = 20, max = 60 wpm. (TNX RZ3AZ)
 CQ WW RTTY default message fixed for US stations (added $EXCHANGE macro). (TNX W9PA)


Ver 2.0.15


 Network time synchronization was running when Number server was enabled. Fixed to run only
 when Time synch server is running. (TNX R9IR)
 Network GAB messages were shown on all network PC's, without checking destination.
 Now fixed and GAB messages is shown on all PC's only if message destination is "ALL" or when client
 responding to DXCluster talk message. In other cases, GAB message will be shown only on PC which
 station ID is same as message destination address. (TNX 9A3ZA)
 Network GAB messages are now saved by default to history file and loaded when log is opened.
 User can switch this off by unchecking "Save to history file" pop-up menu option in GAB window (ALT+I)
 DXC Cluster stream and DXC Spots are now saved to history files. This can be switched off in 
 DXC Announcements window (ALT+A) and DXC Cluster window (ALT+O).
 CW Keyer stop message was delayed until next CW element was sent. Fixed. (TNX RZ3AZ, N6TV, OE1EMS, YU7RL)
 When using DIGI modes, if macro message contains $LOGGEDCALL macro command and current logged qso callsign is
 empty, DXLog.net automatically grabs last known (highlighted) callsign from TX/RX window. (TNX 2E0SQL)
 MMVARI window was opened in BPSK mode by default, even if contest was RTTY only. Now changed so that during window
 initialization new mode is set to currently active mode for radio. (TNX 2E0SQL)
 When using keyboard and longer text (for example from macro) was sent, if user closed keyboard window by clicking on
 X in right upper corner, TX was iddling after message was sent. Now changed on the way that TX is stopped immediately
 if keyboard window is closed (by clicking X, or button). (TNX 2E0SQL)
 New shortcut introduced: CTRL+PLUS now silently save QSO when ESM mode is enabled.
 MMTTY RTTY decoder is now supported.
 2Tone RTTY decoder is now supported.
 New options available: Secondary decoder for Radio 1 and Radio 2.
 Options->RTTY configuration menu is now available.
 User can choose primary/secondary decoder type for each radio. Default is MMVARI.
 MMTTY / 2Tone decoders should be installed before usage.
 Fixed OmniRig frequency "rounding" problem.
 CW word spacing is now corrected to right values.
 Options->Log menu is now shown also as context popup-menu after mouse right click in the log. (TNX N6TV)
 When Alt key only was pressed, top menu was accessed. Now fixed. (TNX N6TV)
 Additional CW/RTTY messages can be transmitted from editor window (ALT+C). (TNX N6TV)
 Installer now remembers installation directory from previous versiona and in case of upgrade,
 it will propose same installation directory. (TNX N6TV)
 New contest supported: CNCW (EA local contest).
 Live score mode fixed for CQ WW RTTY contest. 

Ver 2.0.14


 Live score post now option was active only when Enabled auto posting was checked. Fixed.
 Fixed problem with Thread polling in WinXP systems when CW keying is running.

Ver 2.0.13


 Fixed MMVARI baud rate was reset to default whan changing sound card selection.
 Fixed "File in use" error when downloading CTY_WT_MOD.dat update. (TNX W9PA)
 CQP: changed dupe calculation from band/mode to band/mode/county. (TNX N6TV)
 New option added: Tools->Data entry->Exchange guessing.
 User can select between 3 options:
 - Pressing the space bar
 - Automatically
 - After timeout
 CQ WW scoring for NA<->NA stations was wrong. Fixed. (TNX NQ4I)
 DX Spots in network didn't propagate to clients monitoring window (ALT+O). (TNX NQ4I)
 Spot station (ALT+F3) and Talk to DXC (ALT+T) are now enabled when network is enabled.
 CTRL+TAB was switching RUN/SP mode always on radio 1, and CTRL+SHIFT+TAB on radio 2.
 It's changed to: 
 CTRL+TAB switch RUN/SP mode on primary (active radio)
 CTRL+SHIFT+TAB switch RUN/SP mode on secondary (inactive radio) (TNX N6TV)
 Dupe info wasn't refreshed in SCP windows when double qso check mode was based on received info field. (TNX N6TV)
 DXCluster talk messages are now shown in GAB window.
 Talk messages can be responded in GAB window by selecting destination callsign for GAB message.
 New contest supported: Polar radioman contest. (TNX 9A1AA)
 New contest supported: Georgia QSO party.
 New contest supported: Florida QSO party.


Ver 2.0.12


 microHam internal DVK keyer is supported now.
 SSB bargraph added. Active during recording / playing DVK messages on sound board.
 Tooltips with additional informations are added on Bandmap windows. (TNX OE1EMS/E77DX)
 Fixed DXCAnnouncements window double click problem. (TNX DH2WQ)
 DUPE text is now shown in mult column if worked QSO is DUPE. (TNX N6TV, R9IR)
 Double click on callsign at Check partials and N+1 window now grab callsign into actual QSO entry window.
 New contest supported: DRCG World Wide RTTY. (TNX DM5TI)
 ICOM 746 radio was ICOM 746 PRO. Renamed. (TNX SV1DOO)
 New radio support added: ICOM 746.
 CW timing issues. Added internal compensation factor. Should be more precise now.
 Network ping message introduced. If response is not received in 30 seconds, network is restarted on client.
 Sending spots (ALT+F3) was disabled when connected to other dx cluster. Fixed now. (TNX R9IR)
 Adding QSO notes (ALT+N) command is now available.
 BARTG SPRINT and BARTG SPRINT75 splitted in two config files.
 BARTG SPRINT and BARTG SPRINT75 config corrected according to the rules.
 New contest supported: TRC-DX Contest. (TNX F5IN)
 New option added: Options->Interface specific configuration->Use MMVARI center frequency correction
 Default is checked.
 If checked DXLog.net will calculate actual frequency as frequency from radio +/- MMVARI carrier center frequency.
 This corrected frequency will be used as actual bandmap frequency, dxspotting frequency and stored as frequency 
 where qso was made.
 MMVARI new options added: Sound card RX, Sound card TX.
 Allows user to choose which sound card will be used for RX and TX in each of the MMVARI Radio windows.
 Default value is windows default sound card setting.
 New contest supported: Wednesday mini contest. (TNX RZ3AZ)


Ver 2.0.11


 Double click on Check callsign or Check multipliers data now immediately scrolls log to clicked qso.
 Tools->Repeat loop option was broken (txt command was OK). Fixed now. (TNX DK5TX)
 Redefine keys wasn't working properly when destination key included Shift modifier. Fixed now. (TNX DK5TX)
 OmniRig is now supported.
 ADIF import is redesigned and optimized for faster import.
 The hyphen or minus key (-) quickly activates/deactivates Split mode.
 Command line arguments "-n" or "--noautoload" can be specifed to override Load contest at startup option.
 WAEDC contest - DX side QTC sending is now enabled.
 WAEDC contest - added info messages for number of QTCs available/received/sent/in stock etc.
 Floating windows option was broken. Now fixed. (TNX DF1LX)
 Check multipliers window data was display only for MULT1 field. Now it uses first field in sequence MULT1, MULT2, MULT3
 which isn't empty. (TNX DK5TX)
 QTC network messages added. QTC synchronization is on and data is synchronized between stations in network.
 Options->Log->Fonts->Large wasn't properly restored after log opening. Fixed. (TNX G4BYG)

Ver 2.0.10


 Version numbering is changed as of version 2.0
 Footswitch PTT function on serial port (DSR pin) is now available.
 Software interlock is available now.
 Number server is implemented.
 Multi op band / mode change counters are available and can be defined by category in config files.
 SO2R is now supported.
 Fixed CW keying problem with COM port 10 and above.
 UBA Contest rules changed for year 2014.
 SCWC config fixed because of problems with special letters in category names when using Win8 OS. (TNX YT3W)
 Tesla memorijal local YU V/U/SHF contest is now supported. (TNX YT3W)
 New option added: Redefine keyboard keys (Text command: DEFINEKEYS).
 New text commands added: SETUP (configure interfaces) and WRITELOG (Export cabrillo file)
 GTC CW Cup Config changed: new rules for 2013.
 Serial port communication is now fully moved to low level API access.
 New contest supported: OK1WC Memorial HF Contest. (TNX YT3W)
 New SO2R boxes supported: Microham MK2R/MK2R+/u2r. (TNX Jozef OM7ZZ from Microham).
 Standard cw messages editor available.
 Search and Pounce mode implemented.
 User can select between Run/S&P mode with Ctrl+Tab (Radio1) or Ctrl+Shift+Tab (Radio2).
 Additional cw messages available (editor + msg 1..12 with macros $MSG1..$MSG12).
 Added search and pounce messages set (available in editor and SHIFT + key editor)
 Sprint exchange logic implemented. (TNX N6TV).
 CW Shortened spaces implemented. Can be enabled or disabled.
 Country files can be selected between CTY.DAT, CTY_WT.DAT and CTY_WT_MOD.dat. 
 SO2R Scenarios editor implemented.
 SO2R Scenarios can be used in Advanced SO2R mode. 
 Active scenario can be selected on menu or shortcuts (Ctrl+Alt+1..8)
 Active radio, Headphones and Stereo RX mode control is now possible on serial ports.
 Zoom level on bandmap is saved in and restored from configuration file.
 If $CR macro exists in CW message when esc is pressed, $CR macro is executed anyway.
 New option available: Options->DX Cluster->Reconnect default DXCluster at start.
 BUG fix: Keyboard mode was sending spaces between each character.
 The "<" and ">" keys now works as field navigation.
 OK button is now default one on SETUP screen.
 New text commands: REOPEN/RELOAD and REOPENNOW/RELOADNOW - reopens current log
 CTRL+K, CTRL+A and CTRL+E key combinations now works on entry fields.
 CW speed is saved in and restored from configuration file.
 CW leading zero and abbreviation settings are saved in and restored from configuration file.
 Hide QSO numbers setting is now saved in and restored from configuration file.
 All fields except callsign field are in overwrite mode now.
 New text commands: VER/VERSION - shows about screen.
 Ctrl+Up, Ctrl+Shift+Up, Ctrl+Down, Ctrl+Shift+Down now navigate through bandmap.
 When in repeating mode, pressing F1 while CQ is running, stops current CQ, and restarts new one
 from the start.
 Changed max length RecInfo field for CW Open contest to 12 characters (contest txt config file changed).
 Cursor position in field is now remembered and restored while scrolling through log with up/down arrows.
 Message keys F1..F7, INS and PLUS are accesible in keyboard window.
 Esc key now closing keyboard window if TX isn't active.
 BUG fix: there was a bug in procedure for processing cat data from Kenwood, Elecraft and some Yaesu type of radio.
 The exception was not properly handled and serial port communication was immediately closed.
 DXCluster Announcements window display options are now saved in and restored from configuration file.
 Recent opened files list is available in File menu. Last 4 opened logs are remembered.
 New option added: Options->Load contest at startup->Enabled/Disabled.
 If enabled, most recent log file is automatically opened after application start. Default is disabled.
 Microphone muting functions while using Sound card as DVK implemented.
 Works on older Windows (XP, 2000) and newer versions (Vista, Win7 etc).
 New option added: GOTO Qso (Shortcut CTRL + G). Jumps to desired QSO number in the log.
 New option added: Options->CW->Remap keys in keyboard mode. 
 If checked, KEY remapping works when CW keyboard is active. Default is unchecked.
 New option added: Options->CW->Work dupes (Text commands: WORKDUPE/WORKDUPEON, NOWORKDUPE/WORKDUPEOFF).
 If work dupes is checked/activated, $QSOB4 macro doesn't send QSOB4 message if QSO is dupe.
 NumLock key is now ignored as key for redefinition.
 New option added: Commands->Operator login (Text commands: OPON/LOGIN, OPOFF/LOGOFF).
 If operator is logged on, callsign is associated with any new qso logged.
 Also, operator callsign is used for different voice memories (subdirectory is equal to logged on callsign).
 New option added: Options->Interface specific options->Allow different TX/RX antenna.
 If checked, TX and RX antenna can be different (selected with ALT + F11 / F12 keys).
 TX/RX antenna is automatically switched before PTT ON and after PTT OFF.
 Default is unchecked.
 New option available in config interfaces screen: PTT Tail Delay (ms).
 Network protocol is changed. DXLog.net V2.0 will run on new network protocol.
 New option added: Tools->Data entry->Enable ESM mode (Text commands: ESM/ESMON, NOESM/ESMOFF).
 If checked, ESM (enter sends message) is enabled. Default is unchecked.
 New contest supported: RCC Fieldday.
 Bug fix: when CAT interface was active on two radios, polling function was sharing same address space. Now it is
 changed to run in different address spaces. (TNX N6TV)
 New option added: Options->Log->Stay in field while moving up and down in the log. Default is checked.
 Bandmap function: Alt->Doubleclick - put frequency in opposite vfo.
 Bandmap function: Ctrl->Doubleclick - quickly delete desired callsign from bandmap.
 New text field editing shortcuts implemented: Ctrl+B, Ctrl+D, Ctrl+F, Ctrl+W, Ctrl+K.
 DXCluster monitor window (ALT+O) now shows connection name and status in titlebar.
 Multi-threading functions are recorded for better internal synchronization and more stability.
 New contests supported: NA Sprint, NCCC Sprint.
 New text commands available: AUTORELOAD / NOAUTORELOAD (same function as Options->Load contest at startup->Enabled/Disabled)
 New text commands available: CLEARLOG / CLEARLOGNOW (delete all qsos from active log file)
 New text commands available: COPYLOG / COPYLOGCLEAR (copy active log file to new log file with timestamp added to name)
 In case of COPYLOGCLEAR command, log is copied as empty, without any qso in it.
 New option added: Edit->Delete all qso (same as CLEARLOG text command).
 Export Cabrillo file now has default name same as active log file, with different extension (.log). 
 User can change it in dialog available before saving.
 New text command available: BYE (same as EXIT / QUIT)
 New text command available: NEW (same as File->New)
 New text command available: OPEN (same as File->Open)
 New text commands available: NET/NONET & NETON/NETOFF (enable/disable DXLog.net network communications).
 New text commands available: NETCONFIG (same as Options->Configure network).
 New text commands available: ILOCK/NOILOCK & ILOCKON/ILOCKOFF (enable/disable DXLog.net sw interlock).
 New text commands available: CTYFILES/COUNTRYFILES (same as Options->Data files->Country files).
 ICOM 746 added to the list of supported radios.
 New callsign database for Serbian HF Cup (YU Local contest) is included in new release. (TNX 9A1AA)
 Cabrillo import is now fixed when fields are optional or different and depending on DEST parameters.
 For example. (NA Sprint, NCCC Sprint etc). 

Ver 1.1.17 (20-Jun-2013)


 Live score posting to cqcontest.net is implemented now. (TNX RW4WM)
 Time ON/OFF counters implemented in rate window.
 Time ON/OFF information is added to summary text info (copy as text).
 Status info window is available now (shortcut ALT+J).
 Network messages for status info window are implemented.
 Multi/Single ten minute rule counters are available now (visible in status info window).
 Station type can be selected at Commands->Station type menu.
 LPT port keying was broken in previous version. Fixed now. (TNX 9A1AA)
 New menu actions are available to switch antenna from software, if multiple antennas are available
 for same band (Commands->Antenna selection ->Change TX / Change RX). Shortcuts ALT+F11 / ALT+F12.
 Currently selected RX/TX antenna is visible in status bar. This will be moved to new window in software.
 When using LPT port band data for antenna switching, currently there isn't possible to set different antena for TX/RX.
 This feature will be implemented too, but need more testing because of possible relay hot switching problems.
 Some contest config files are changed where live score contest name is not same as contest name for Cabrillo file.
 WAG contest: default CW messages for DL stations now points to $EXCHANGE variable, and for non-DL stations to $SERIAL.


Ver 1.1.16 (12-Jun-2013)


 Cabrillo format for Portugal day contest is now fixed. (TNX 9A1AA)
 Fixed Cabrillo entry for TB-WIRES category in CQ WPX Contest. (TNX 9A6C)
 New contest supported: Ukrainian DX DIGI Contest.
 New contest supported: Ukrainian DX Classic RTTY Contest.
 CAT protocol was broken on FT-897D. Now it is OK. (TNX 9A6SJZ)
 VFO A/B selection now should work on Kenwood radio too.
 Bandmap list vertical scroll doesn't reset on top position anymore when new spot is received.
 New bandmap display options added (hide dupes and invalids + show multipliers only).
 Clear bandmap command working now.
 UR oblasts database is now included in distribution. (TNX YT3W)
 EZMaster antenna matrix support is implemented.
 LPT port configuration screen changed to provide band data info on LPT port pins, DVK control etc.
 LPT bcd band data is implemented now. Defaults to Top-Ten Devices now, but there will be new config screen to configure pins if needed.

Ver 1.1.15 (08-Jun-2013)


 QSO frequency can be edited now in ALT+F screen. (TNX E70T)
 New contest supported: RCC Cup. (TNX YT3W)
 New contest supported: Aegean RTTY Contest. (TNX YT3W)
 New contest supported: DL-DX RTTY. (TNX YT3W)
 New contest supported: DMC RTTY Contest. (TNX YT3W)
 New contest supported: Russian «RADIO» RTTY WW Contest. (TNX YT3W)
 New contest supported: Sainio CW Contest. (TNX YT3W)
 New contest supported: Sainio RTTY Contest. (TNX YT3W)
 New contest supported: Sainio SSB Contest. (TNX YT3W)
 New contest supported: UA2 QSO Party. (TNX YT3W)
 Bug fix: Helvetia contest definition double qso was calculated per band/mode, fixed to per band only. (TNX 9A1AA)
 Bug fix: Cabrillo/ADIF export was broken when RST field was shorter than expected. (TNX 9A9A)
 New radio supported: Yaesu FT-450.
 Bandmap active VFO now tracks active vfo on radio.
 Switching bandmap active vfo now sends cat command to radio to switch vfo.
 New contest supported: Ukrainian Radio Sport Team Championship. (TNX YT3W)

Ver 1.1.14 (23-Apr-2013)


 Bug fix: worked prefix display window was broken when callsign with multiple number was logged.
 New macro command available: $SPACE 
 Worked multipliers list window was broken when QSO with unrecognized DXCC was logged. (TNX OK1RI)
 Fixed some threading problems in check partials methods.
 Added 24 GHz band for EU V/U/SHF contests. (TNX 9A4QV)
 Fixed 50 MHz QSOs ADIF import problem when using DXPedition mode. (TNX J28AA/E70A)
 WWL locator database is now included for EU V/U/SHF contests.
 SCP search by recinfo value from database is now available.

Ver 1.1.13 (05-Apr-2013)


 SPDX database included. (TNX SP5KP)
 Bug fix: postcontest mode qso scrolling was broken when trying to scroll from UTC time field.

Ver 1.1.12 (29-Mar-2013)


 Fixed Veteran (YUOTC) contest.

Ver 1.1.11 (18-Mar-2013)


 New contest supported: Bucharesti HF International Contest.
 Bug fix: Cabrillo export for CQ WPX Contest.
 New contest supported: SARTG WW RTTY Contest. (TNX YT3W)
 New contest supported: SARTG New Year RTTY Contest. (TNX YT3W)

Ver 1.1.10 (15-Mar-2013)


 New contest supported: Russian Radio Team Championship. (TNX YT3W)
 New contest supported: Volga Federal District Radio Team Championatship. (TNX YT3W)
 New contest supported: RAC Canada Day Contest. (TNX YT3W)
 New contest supported: RAC Canada Winter Contest. (TNX YT3W)
 Bugfix: SCWC Contest. (TNX YT3W)

Ver 1.1.9 (14-Mar-2013)


 New contest supported: RSGB CW National Field Day. (TNX YT3W)
 New contest supported: RSGB RoPoCo Contest. (TNX YT3W)
 New contest supported: RSGB First 1.8MHz Contest. (TNX YT3W)
 New contest supported: RSGB Second 1.8MHz Contest. (TNX YT3W)
 New contest supported: PODXS Ø7Ø Club PSKFest. (TNX YT3W)
 New contest supported: PGA Test. (TNX YT3W)
 New contest supported: PGA-DIGI. (TNX YT3W)
 New contest supported: Polska WW BPSK63 Contest. (TNX YT3W)
 New contest supported: Yuri Gagarin International DX Contest. (TNX YT3W)
 New contest supported: PODXS 31 Flavors Contest. (TNX YT3W)
 New contest supported: PODXS 40 Meter Firecracker Sprint. (TNX YT3W)
 New contest supported: PODXS 80 Meter Jay Hudak Memorial Sprint. (TNX YT3W)
 New contest supported: PODXS 160 Meter Great Pumpkin Sprint. (TNX YT3W)
 New contest supported: PODXS Valentine Sprint. (TNX YT3W)
 New contest supported: Goes hunting for wolves. (TNX YT3W)
 New contest supported: RSGB Affiliated Societies Contests. (TNX YT3W)
 New contest supported: RSGB Low Power Contest. (TNX YT3W)
 New contest supported: RSGB SSB Field Day. (TNX YT3W)
 New contest supported: RSGB 80m Sprint Contest. (TNX YT3W)
 New contest supported: RSGB Club Calls Contest (1.8MHz AFS). (TNX YT3W)
 New contest supported: Open Ukraine RTTY Championship. (TNX YT3W)
 New contest supported: Ural Cup. (TNX YT3W)
 YAESU FT-897 CAT communication supported.

Ver 1.1.8 (19-Feb-2013)


 New contest supported: EPC Ukraine DX Contest. (TNX YT3W)
 New contest supported: UK DX BPSK63 Contest. (TNX YT3W)
 New contest supported: CIS DX PSK Contest. (TNX YT3W)
 New contest supported: IOTA Contest. (TNX YT3W)
 ICOM IC-7410 CAT communication supported.

Ver 1.1.7 (15-Feb-2013)


 New contest supported: British Columbia QSO Party (BCQP). (TNX YT3W)
 New contest supported: AGCW YL-CW Party. (TNX YT3W)
 New contest supported: KCJ TOPBAND Contest. (TNX YT3W)
 New contest supported: KCJ Contest. (TNX YT3W)
 New contest supported: Asia Pacific Sprint Contest.
 New contest supported: RSGB 80m Club Championship. (TNX YT3W)
 New contest supported: Holyland Contest. (TNX YT3W)
 New contest supported: Russian WW PSK Contest. (TNX YT3W)
 New contest supported: EPC Russia DX Contest. (TNX YT3W)
 New contest supported: EU PSK DX Contest. (TNX YT3W)
 New contest supported: Sumadija PSK. (TNX YT3W)
 Fixed HQ stations calculation in BSCI contest. (TNX 9A1AA)

Ver 1.1.6 (01-Feb-2013)


 New contest supported: CQ-WE (Western Electric) Contest. (TNX YT3W)
 Multiple custom multiplier lists windows are available now.
 Fixed CW keyer problem when cw message is defined as single macro.

Ver 1.1.5 (30-Jan-2013)


 New contest supported: Triathlon DX contest. (TNX YT3W)
 New contest supported: International NAVAL Contest. (TNX YT3W)
 New contest supported: NAQP - North American QSO Party. (TNX YT3W)
 New contest supported: YO International PSK31 Contest. (TNX YT3W)
 New contest supported: ARRL Sweepstakes. (TNX YT3W).
 New contest supported: Black Sea Cup International (BSCI).
 DXCluster connection code is now redesigned for more stability.
 Serial port keying now working with access to serial port on WIN API level, 
 because of more accurate keying, problems with some USB->RS232 serial converters etc.

Ver 1.1.4 (17-Jan-2013)


 New contest supported: DTC - German Telegraphy Contest. (TNX YT3W)
 New contest supported: Marconi Memorial HF. (TNX YT3W)
 New contest supported: EUCW Fraternizing CW QSO Party. (TNX YT3W)
 New contest supported: BARTG RTTY SPRINT & SPRINT 75 Contest. (TNX YT3W)
 New contest supported: BARTG RTTY SPRINT 75 Contest. (TNX YT3W)
 New contest supported: BARTG HF RTTY Contest. (TNX YT3W)
 New contest supported: Baltic contest. (TNX YT3W)
 New contest supported: PACC. (TNX YT3W)
 New contest supported: EA PSK63 Contest. (TNX YT3W)
 New contest supported: EA RTTY Contest. (TNX YT3W)
 New contest supported: Russian DX contest. (TNX YT3W)
 DARC 10m fixed invalid multiplier error.
 DOK database is now in valid format.
 MMVARI RX window now recognizes callsigns, multipliers, dupes etc.
 Implemented TX/RX switching when using digital modes.
 More bug fixes regarding mode reading when using CAT and MMVARI.

Ver 1.1.3 (10-Jan-2013)


 New contest supported: CQMM DX (CQ Manchester Mineira DX) Contest. (TNX YT3W)
 New contest supported: AGCWDL-QRP. (TNX YT3W)
 BUG fix: parsing of some custom fx was broken due wrong culture info. 
 New config field available: Operator name (OPNAME).
 Digital modes with MMVARI (author JE3HHT - MM HAM SOFT) engine supported and included in distribution.
 New contest supported: EPC WW DX Contest. (TNX YT3W)
 YU KT Maraton new rules supported. (TNX YT3W)

Ver 1.1.2 (07-Jan-2013)


 New contest supported: ARRL 10m Contest. (TNX YT3W)
 New contest supported: Japan International DX Contest. (TNX YT3W)
 New contest supported: SP DX Contest. (TNX YT3W)
 New contest supported: 9KCC 15m Contest. (TNX YT3W)
 New contest supported: Helvetia Contest.
 New contest supported: ES Open Contest.
 New contest supported: WW PMC Contest. 
 New contest supported: OK DX RTTY Contest. (TNX YT3W)
 New contest supported: QRP-QRP Party (by AGCW-DL). (TNX YT3W)
 BUG fix: score summary display by mode was broken. 
 BUG fix: custom multiplier list width was wrong when mult group was visible.

Ver 1.1.1 (03-Jan-2013)


 New contest supported: DARC 10m Contest.
 New contest supported: LZ Open Contest.
 New contest supported: Hungarian DX Contest.
 New contest supported: CQ WW 160-Meter Contest.
 New contest supported: REF Contest.
 Changed extension for DXLog log files from .dxl to .dxn because of collision with DX4WIN software
 (file open still allows to open old extension, but in new log creation there is only .dxn extension allowed)
 BUG fix: letters on clock window was overlapped when using bigger fonts. (TNX 9A6SJZ)

Ver 1.1.0 (02-Jan-2013)


 Fixed some problems with ARRL DX contest definition.
 Added startup splash screen.
 New fonts are now embedded with application.
 Fixed problems with true type font errors during the exit from application.
 Networking: fixed some problems with socket exception errors.
 Networking: contest checking is now implemented when establishing connection.
 Networking: CW message synchronization can be initiated on network now.
 Networking: QSO logging can be disabled on some PC when in network. Instead of saving QSO, callsign is added to bandmap.
 New contest supported: EU CW 160m QSO party.

Ver 1.0.52 (22-Dec-2012)


 New contest supported: AGB Party. (TNX YT3W)
 New contest supported: ARI DX. (TNX YT3W)
 New contest supported: ARRL DX. (TNX YT3W)
 New contest supported: CQ WPX RTTY. (TNX YT3W)
 New contest supported: HSC. (TNX YT3W)
 New contest supported: NRAU. (TNX YT3W)
 New contest supported: VU DX. (TNX YT3W)
 New contest supported: CQ-M. (TNX YT3W)
 New contest supported: UBA. (TNX YT3W)
 New contest supported: Stew Perry Top Band Distance Challenge.
 BUG fix: DXCC_DB_TYPE / DXCC_DB_FILENAME - wasn't read from config file, it was hardcoded to CTY + CTY.dat. (TNX YT3W)
 BUG fix: Russian 160m contest - R1AN* station points calculation. (TNX YT3W)
 Custom multiplier grouping is available now in config file.


Ver 1.0.51 (14-Dec-2012)


 Russian 160m contest - fixed R1AN calculation.
 New config function added: RGX_GUESS_DB. Now regex can be used for guessing exchange for not worked stations.
 For example: database is now implemented for Russian oblasts.

Ver 1.0.50 (14-Dec-2012)


 Added CQ repeat loop function. This can be activated in Options->CW->Repeat loop menu or
 with text command RPT (deactivated with NORPT txt command or click in menu option).
 Repeat loop active status is visible at bottom of Rate window.
 New contest supported: Russian 160m contest.

Ver 1.0.49 (13-Dec-2012)


 WinKeyer initialization was broken in previous version. Now fixed. TNX 9A2HM.

Ver 1.0.48 (13-Dec-2012)


 Fixed prefix multiplier list window display.
 Fixed Cabrillo contest name for TAC contest. (TNX YT3W)
 Added grouping for different contest type in contest selection combo.
 New contest supported: AGCW HNY. (TNX YT3W)
 New contest supported: 21 Decembar. (TNX YT3W)
 WinKeyer supported.

Ver 1.0.47 (04-Dec-2012)


 Fixed some bug in CAT frequency reading when bandmap spot is clicked.
 CQ frequency is now marked on bandmap.
 ALT+F4 returns to CQ frequency.

Ver 1.0.46 (02-Dec-2012)


 Fixed mult calculation by band for TAC contest. (TNX 9A1AA)
 Bandmap list is now scrollable.
 Bandmap is clickable now.

Ver 1.0.45 (01-Dec-2012)


 New contest supported: TAC

Ver 1.0.44 (03-Nov-2012)


 New contest supported: Ukrainian DX Contest (URDXC).

Ver 1.0.43 (18-Oct-2012)


 New contest supported: Worked All Germany (WAG).
 New contest supported: OK/OM DX Contest.
 Cabrillo export fixed in case of wrong mode from CAT. TNX 9A6SJZ.
 Bandmap is now implemented (list + regular bandmap layout)
 Database file checking now working also for multiplier determination for
 spots received from DX cluster.

Ver 1.0.42 (02-Oct-2012)


 Default window/configuration settings are saved when log is closed. They are used for defaults
 when new log is created.
 GTC contest definition is now fixed. TNX SV5DKL.
 Added GTC members database. TNX 9A1AA.

Ver 1.0.41 (20-Aug-2012)


 Fixed DXC info display when points are based on distance (V/U/SHF contest).
 Fixed Cabrillo output for IARU HFC contest. TNX 9A2TE.
 Add support for VHF/UHF bands in new dxpedition mode. TNX 9A6NDD.

Ver 1.0.40 (18-Jun-2012)


 Fixed some bugs in Cabrillo import process.
 GTC CUP rules changed, according to new rules. TNX SV5DKL.
 New contest supported: His Majesty The King of Spain.
 Fixed CAT initialization problem with FT-847. TNX DL5SWB.

Ver 1.0.39 (08-Jun-2012)


 New contest supported: Portugal day contest.
 New contest supported: WWSA GACW.

Ver 1.0.38 (08-Jun-2012)


 New contest supported: UNDXC.
 New contest supported: EURO 2012 QSO Party.
 New contest supported: EU FF Green QSO party.


Ver 1.0.34 (17-Nov-2011)


 New contest supported: LZ DX.
 New contest supported: Sumadija. TNX YT3W.


Ver 1.0.33 (30-Sep-2011)


 Fixed CW generating problems (now complete running on performance counters)
 MMTTY integrated with DXLog.net for RTTY contests (this is still in testing phase)
 New contest supported: CQ WW RTTY
 Bug fix: page up scrolling was broken when scroll starts from previous qso line
 It's possible to import QSO's from ADIF log file (when current log is opened)

Ver 1.0.32 (21-Sep-2011)


 Fixed distance (QRB) calculation formula. TNX 9A2HM, 9A2MI & 9A6C.
 Fixed EDI export CW mode. TNX 9A6C, 9A2HI
 Network protocol v1.0 is included now.
 QSO rate statistics added.
 Moved to performance counters for CW timing calculations instead of multimedia timers
 because of higher accuracy.
 New contest support: First Greek Telegraphy Club CW Cup.
 Bug fix: final score calculation for KTKS contest now works OK. TNX YT3W.
 Bug fix: bandmap / dxcluster now doesn't change active qso period.
 Period up/down shortcuts are changed to CTRL+F10/F11, because statistics window shortcut is CTRL+F9.

Ver 1.0.31 (07-Sep-2011)


 INVALID QSO message fixed for VHF/UHF/SHF contest. TNX 9A9L.
 New contest support: California QSO party (CQP).
 New contest support: Oceania DX.
 New contest support: EU Sprint.
 New contest support: Scandinavian Activity Contest (SAC).
 Added N+1 check partials support.
 Added bandmap / dxc properties editing form.
 New config option to remove decimal points in avg point calculation.
 Added ODX data on rate window (for VHF/UHF/SHF contests). TNX 9A6C.
 Mode field can be visible in qso list form (enabled by default for VHF/UHF/SHF contests).

Ver 1.0.30 (26-Aug-2011)


 $CORRECT CW macro now sends corrected call sign.
 Text color changes now work OK in rate window.
 Alt+F3 now sends DX spot to cluster.
 Added Copy to text option on Summary window context menu.
 Added Copy to text option on Worked DXCC window context menu.
 Added YU DX contest support. TNX YT3W.
 DXLog.net windows can be independent of main window. TNX YT3W & YU1LM.
 New contest support: IARU Region 1 Fieldday (DARC rules).
 DXC Announcements and bandmap windows now resize OK with bigger fonts. TNX 9A1AA.
 DXC Announcements modify/delete functions now works OK.
 Fixed points column width on log screen (last digit wasn't visible when QRB was 1000 km or more). TNX 9A6C.
 Frequency marker added and activated on bandmap window.

ver 1.0.29 (15-Aug-2011)


 Fixed ADIF export bug. TNX 9A1AA.

ver 1.0.28 (15-Aug-2011)


 New contests supported: RDA Contest, YO DX HF Contest, CW Ops - CWT,  All Asian
 Improved CW sound monitor.
 New contest databases handling added into contest config files. 	
 Moved on WIX installation script instead of Install Shield LE.

ver 1.0.27 (14-Aug-2011)


 Fixed problems with decimal signs in frequency from CAT. TNX 9A1AA.
 New radios supported:	Yaesu FT-847, Yaesu FT-857D, Yaesu FT-2000. TNX YT3W.

ver 1.0.25 (13-Aug-2011)


 New contests supported: WAE DX, CW Ops - CW Open.
 Fixed some bugs with QTC entries.

Register

To register your copy of DXLog.net and to unlock full version functionality you have to
go at http://www.dxlog.net website. From main menu, click on "License Key" link.

After entering all details needed and confirming, you will receive a registration key.

It is a good idea to copy and paste this into a text file, should you want to reinstall
DXLog or install on other computers belonging to you.

In DXLog.net, click Help|Register and fill in the registration details:

  • username of registered user (usually first and last name),
  • callsign of registered user
  • license key (the long key received during registration process)

Be careful when entering this data because they have to be exactly same as the data
you used in registration process. Copy-and-paste is a safe method.

Your license key is valid for one year. During that period, you can upgrade existing installations.

After this one year period is expired, the installed version of DXLog will continue to work with
full functionality but you can not update to a newer version.

You can use same license key on all your computers. The registered callsign does not need to
be the same as the callsign you use in a contest.