# 
# DXLog.net contest definition file 
#
CONTESTGROUP=VHF/UHF/SHF
CONTESTNAME=Marconi Memorial VHF
CONTESTWEB=https://www.darc.de/?id=49390
CONTESTRULES=https://www.iaru-r1.org/wp-content/uploads/2021/03/Rules-2021.pdf

CATEGORY_MODES=CW
BANDS=144
EDI_BANDS=144 MHz
MODES=CW

# Contest configuration
CFG_GRID_MANDATORY=YES
LIVESCORE_CONTEST_NAME=MARCONI-MEMORIAL
CATEGORIES=Single operator;Multi-operator;6-hours
OVERLAY=
CLASS=
CABRILLO_OPERATOR=SINGLE-OP;MULTI-OP;MULTI-OP
CABRILLO_TRANSMITTER=ONE;ONE;ONE
CABRILLO_ASSISTED_DISABLED=YES
CABRILLO_TIME=24-HOURS;24-HOURS;6-HOURS
MULTISINGLE_RULE10_ENABLED=NO

# Minimum break time is two hours
MIN_OFF_TIME=120

# Scoring
DOUBLE_QSO=PER_BAND
POINTS_TYPE=QRB

# Score display
SCORE=BY_BAND
SCORE_DISPLAY=BAND;QSO;DUP;AVG0(AVG);POINTS(POINTS)

# Prefill configuration
DB_FILE=vhf_uhf_r1_db.txt
DB_FILE_TYPE=TXT
DB_FILE_COL_RCVD=-1
DB_FILE_COL_RECINFO=1
DB_SCP_FROM_EXCHANGE=YES

# Silent multiplier for displaying worked grids in custom multiplier field
MULT1_TYPE=FX
MULT1_FIELD=RECINFO
MULT1_COUNT=PER_BAND
MULT1_DISPLAY=G
MULT1_FX=$FIELDVALUE.Substring(0,4)
MULT1_NO_ALERT=YES
OWN_MULT_VALID=YES
WINDOWS_CML_ENABLED=YES
WINDOWS_CML_NAME=Maidenhead squares
WINDOWS_CML_DATA=MULT1
WINDOWS_CML_LABELS_IN_ROW=17
WINDOWS_CML_LIST_FX=GetList_GridArray(ownGrid,19,17)
FIELD_MULT_VISIBLE=NO
MULT_SUM=NO

# Second silent multiplier to make sure worked DXCC is updated when logging
DXCC_DB_USE_ARRL_LIST=YES
MULT2_TYPE=DXCC
MULT2_FIELD=FROM_DXCC
MULT2_NO_ALERT=YES

# Progress windows
WINDOWS_WKD_DXCC_ENABLED=YES
WINDOWS_WKD_GRID_ENABLED=YES
WINDOWS_ON4KST_ENABLED=YES

# Log fields
FIELD_NR_VISIBLE=YES

FIELD_RCVD_NUMERIC=YES
FIELD_RCVD_MANDATORY=YES
FIELD_RCVD_COPY=NO
FIELD_RCVD_TYPE=NR
FIELD_RCVD_MAX_LENGTH=8

FIELD_RECINFO_VISIBLE=YES
FIELD_RECINFO_NUMERIC=NO
FIELD_RECINFO_NAME=Loc
FIELD_RECINFO_MANDATORY=YES
FIELD_RECINFO_TYPE=GRID
FIELD_RECINFO_COPY=YES
FIELD_RECINFO_MAX_LENGTH=6

FIELD_MULT_VISIBLE=NO
FIELD_AZ_VISIBLE=YES
FIELD_RST_3RD_LETTER=A;S
FIELD_CALLSIGN_WWL_CHECK=YES

# CW Messages
CW_Message_1 = CQ $MYCALL $MYCALL TEST
CW_Message_2 = $RST $SERIAL $GRID
CW_Message_3 = $GRID
CW_Message_4 = $MYCALL
CW_Message_5 = $LOGGEDCALL
CW_Message_6 = NR?
CW_Message_7 = ?
CW_Message_INS = $LOGGEDCALL $F2
CW_Message_PLUS = $CORRECT TU $CR $MYCALL