[DXLog.net - Support] Problem /w DXlog and handling of OmniRig
9A5K
9a5k at 9a5k.com
Fri Jun 12 20:39:11 CEST 2015
Ok Michael.
Thanks for info.
I will check this during the weekend with my Icoms here and will post
feedback
as soon as test will be finished.
On Jun 12, 2015 8:34 PM, "Michael Grehl,DH6JL" <dh6jl at rrdxa.eu> wrote:
> Hi to ALL and Chris,
>
> i found today a spare of time to locate the problem .
>
> At first i deinstalled the old installed OmniRig and replaced it with a
> new one .
> I replaced also the Rig.ini settings on c:\Program files
> (x86)\Afreet\OmniRig\Rig
> I downloaded also the zip-packed Client from the DX-Atlas site and started
> it .
>
> After installation of Omni Rig i was able to run 3 times the client and
> change different things at the trx.
>
> Now i closed all and opened a Window of the windows taskmanager .and no
> OmniRig task was visible.
>
> After this i started DXlog (which was configured to OmniRig) and the
> taskmanager shows the DXlog task and
> that OmniRig were running . ..BUT it was NOT the similar qrg shown on
> DXlog (Bandmap) and the TRX.
>
> With some hope i started CW Skimmer and what a surprise the right QRG was
> shown on the display of the skimmer.
> By clicking in the waterfall or the window right of it the qrg could be
> changed that the wanted signal was into the "decode" area.
>
> The Skimmer has the same settings like DXlog.
> My settings are as follows:
> when i look at DXlog > Options > configure interfaces
>
> Additonal /
> Radio 1 polling rate (ms) 500
> Serial ports /
> Interface > Com11 enabled > Device / Radio 1
>
> --> after clicking SETUP for this interface
>
> Radio Configuration
> Radio = OmniRig // Speed 9600 // Bits 8 // Parity N // Stop 1
>
> Below this there is only tagged : use CAT PTT command on Phone
>
> DTR = CW RTS = PTT Footswitch = None Active with = Both
> Radio
>
> I tried also the "Active with Radio 1" option but it could not arrange
> the handshake between Dxlog and trx also.
>
> So my adoption is that there must be some misunderstandings between my
> Icom TRX and DXlog by using OmiRig.
>
> Thats the first quick decription for my problem ...
>
> 73 de Mike
>
> (can answer again at sunday evening june 14 due family qrl)
>
>
>
>
>
> Am 11.06.2015 um 22:23 schrieb 9A5K:
>
>> Ok, tnx..
>>
>> I will also try to test it here during the weekend.
>> On Jun 11, 2015 10:22 PM, "Michael Grehl,DH6JL" <dh6jl at rrdxa.eu> wrote:
>>
>> i tried it with 2 programs seperate before i tried to combine both
>>> and it does not work ..
>>>
>>> BUT i will try it again after the weekend because i have a lot family
>>> business
>>> i will send you detailed info next week ..
>>>
>>>
>>>
>>> Am 11.06.2015 um 19:08 schrieb 9A5K:
>>>
>>> Hi Michael..
>>>>
>>>> This should work normally. Can you try to use DXLog with your ICOM and
>>>> OmniRig first, without CWSkimmer?
>>>> If it works, then this could be a problem with sharing Omnirig
>>>> instances.
>>>> If not, can you forward complete setup of radio in DXLog?
>>>>
>>>> 73,
>>>> Chris - 9A5K
>>>>
>>>>
>>>> On Thu, Jun 11, 2015 at 7:03 PM, Michael Grehl,DH6JL <dh6jl at rrdxa.eu>
>>>> wrote:
>>>>
>>>> Hi to all,
>>>>
>>>>> i do not know if this is really a program problem but let me discribe
>>>>> it.
>>>>>
>>>>> I liked to have access to my icom trx with DXlog and CW Skimmer via
>>>>> OmniRig.
>>>>>
>>>>> CWSkimmer notices the trx via Omni Rig and can control it (QSYing and
>>>>> displaying the qrg)
>>>>> When i choose in radio setup (@DXlog) OmniRig instead of the "special"
>>>>> radio CI-V settings nothing happens.
>>>>> I can not see any handshake activity between OmniRig and DXlog
>>>>>
>>>>> CI-V transceive is OFF @trx and the CI-V don't poll in radio setup
>>>>> @DXlog is also disabled.
>>>>>
>>>>> Is there any "quick" solution or is it perhaps a new point at the
>>>>> future
>>>>> todo list ?
>>>>>
>>>>> 73 de Mike
>>>>>
>>>>> --
>>>>>
>>>>> http://www.dh6jl.de<< for more information abt me
>>>>> _________________________________________________________
>>>>> Member of DFØMU-Contest-Crew / RRDXA / UKSMG #2506
>>>>>
>>>>> (it's NOT how many watts you run, it's how BIG they are! )
>>>>>
>>>>>
>>>>>
>>>>> ---
>>>>> Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
>>>>> https://www.avast.com/antivirus
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Support mailing list
>>>>> Support at dxlog.net
>>>>> http://www.dxlog.net/mailman/listinfo/support
>>>>>
>>>>>
>>>>> --
>>>
>>> http://www.dh6jl.de<< for more information abt me
>>> _________________________________________________________
>>> Member of DFØMU-Contest-Crew / RRDXA / UKSMG #2506
>>>
>>> (it's NOT how many watts you run, it's how BIG they are! )
>>>
>>>
>>>
>>> ---
>>> Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
>>> https://www.avast.com/antivirus
>>>
>>>
>>>
>
>
> ---
> Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
> https://www.avast.com/antivirus
>
>
More information about the Support
mailing list