Jump to content

Menu Tools: Difference between revisions

From DXLog.net
← Older editNewer edit →
M0cke (talk | contribs)
Administrators
1,006 edits
Line 1: Line 1:
<big><big>Menu:Tools</big></big>
==Repeat loop==
Text command: <b><code>RPT / NORPT</code></b><br>
Menu: '''"TOOLS"''' -> '''"REPEAT LOOP"''' <br>
Turns on or off CQ (F1) repeat function.<br>
After pressing F1 (CQ memory) and when message is transmitted, the DXlog repeat loop function will wait for n seconds (default is 3 seconds) before repeating the CQ memory contents.
If a character is entered into the log callsign entry field or the ESC key is pressed the repeat loop will be deactivated.<br>
Delay time setting:-
[[File:repeat.jpg]]
Repeat loop status is visible in the "Rate window", when active.<br>
Repeat loop timing is visible in "Operating info" window.<br>
[[File:repeat_time.jpg]]
If during transmitting the CQ message a character is entered into the log callsign entry field (or esc key is pressed), transmit stops immediately and the repeat loop is deactivated.<br>
==Redefine keyboard keys==
Menu '''"TOOLS"''' -> '''"REDEFINE KEYBOARD KEYS"'''<br>
[[image:redefine_keys.png]]
A DXL command can be assigned to any key (or combination of keys) using this feature. <br>
Once the redefine window is opened just press the new keyboard key (or combination of keys) you want and then type the original key (or combination of keys) that has the default DXL assigned command you want to map to another keyboard key (or combination of keys). <br>
Press OK and the change is saved, now the DXL works in the same way but using the user defined keyboard key (or combination of keys).
==Data entry==
==Data entry==


[[image:data_entry_menu.png]]
[[image:data_entry_menu.png]]


* '''Exchange guessing''' <br>
* '''Exchange guessing''' (not valid for serial #).<br>
If you have a specific database available for a specific contest, you can have different ways to pre-fill the report field (not valid for serial #).
If you have a specific exchange database available for a specific contest, the pre-fill to the report field action can be:
   *Pressing the space bar
   * Pressing the space bar - the report field is completed when you press the spacebar.<br>  
      If your choice is "PRESSING THE SPACE BAR" the report field is completed when you press the spacebar.<br>  
   * Automatically - the report field is completed while you are typing the call-sign.<br>
   *Automatically
   * After timeout - the report field is completed automatically after few seconds you have typed the call-sign.<br>
      If your choice is "AUTOMATICALLY" the report field is completed while you are typing the call-sign.<br>
 
   *After timeout
      If your choice is "AFTER TIMEOUT" the report field is completed automatically after few seconds you have typed the call-sign.<br>
* '''Enable ESM mode'''
* '''Enable ESM mode'''
       '''RUN mode'''
       '''RUN mode'''
       The "ENTER SENDS MESSAGES", better known as "ESM", is a choice to send CW/RTTY messages only using "enter" key.
       The "ENTER SENDS MESSAGES", better known as "ESM", enables the relevant CW/RTTY message to be sent by only using the "enter" key.
       Functioning of this logic is according to cursor position.
 
       If cursor is on empty call-field ESM will send "CQ".
       Message send logic is as follows:
       If cursor is on call-field with a callsign ESM will send CALL+RST. In this case you need to move cursor to RST field.
       If cursor is on empty log callsign entry field - ESM will send "CQ".
       Once in RST field is completed with data "ESM" will send "TU" message and log the qso
       If cursor is on the log callsign entry field with a callsign entered - ESM will send CALL+RST. In this case you need to move the cursor to the exchange field with the space bar.
       In case you don't have the correct information you must leave the RST field empty in order to send "NR?" message  
       When the exchange field is complete - ESM will send "TU" message and log the qso.
    (typically on F6 memory) with "ESM".<br>
 
       If the correct exchange information is not copied correctly then the exchange field must be left empty then - ESM will send "NR?" message (typically F6 memory).<br><br>
       '''S/P mode'''
       '''S/P mode'''
       While in S/P the functioning of "ESM" is related to "S/P CW MESSAGES"
       When in S/P mode ESM sends messages from the Search & Pounce section of CW messages.
       If cursor is on empty call-field ESM will send S/P "F1" message.
       If cursor is on empty log callsign entry field - ESM will send Search & Pounce "F1" message.
       If cursor is on call-field with a callsign ESM will send S/P "INS" message.
       If cursor is on the log callsign entry field with a callsign entered - ESM will send the "INS" message.
       To log the qso just hit '''"CTRL+PLUS"'''
       To log the qso just hit '''"CTRL+PLUS"'''


Line 66: Line 29:
* '''Enable Automatic Run/SP selection'''
* '''Enable Automatic Run/SP selection'''
* '''Enable CW Cut Numbers Translation'''
* '''Enable CW Cut Numbers Translation'''
 
* '''Use INSERT mode in RCVD fields'''
==Message editors==
* '''Enable Morse Runner simulation'''
* '''Enable SO2R scenarion on the fly editor'''
* '''Prefill field values - callsign'''
* '''On the fly editor focus on scenario line'''
* '''Enable grab call from decoder window in digi mode'''

Revision as of 22:26, 7 April 2015

Data entry

File:Data entry menu.png

  • Exchange guessing (not valid for serial #).

If you have a specific exchange database available for a specific contest, the pre-fill to the report field action can be: 

  * Pressing the space bar - the report field is completed when you press the spacebar.
 
  * Automatically - the report field is completed while you are typing the call-sign.

  * After timeout - the report field is completed automatically after few seconds you have typed the call-sign.
  • Enable ESM mode
     RUN mode
     The "ENTER SENDS MESSAGES", better known as "ESM", enables the relevant CW/RTTY message to be sent by only using the "enter" key.

     Message send logic is as follows:
     If cursor is on empty log callsign entry field - ESM will send "CQ".
     If cursor is on the log callsign entry field with a callsign entered - ESM will send CALL+RST. In this case you need to move the cursor to the exchange field with the space bar.
     When the exchange field is complete - ESM will send "TU" message and log the qso.

     If the correct exchange information is not copied correctly then the exchange field must be left empty then - ESM will send "NR?" message (typically F6 memory).


     S/P mode
     When in S/P mode ESM sends messages from the Search & Pounce section of CW messages.
     If cursor is on empty log callsign entry field - ESM will send Search & Pounce "F1" message.
     If cursor is on the log callsign entry field with a callsign entered - ESM will send the "INS" message.
     To log the qso just hit "CTRL+PLUS"
  • ESM mode change focus on LOGGEDCALL macro
  • Enable Run/SP switching
  • Enable Automatic Run/SP selection
  • Enable CW Cut Numbers Translation
  • Use INSERT mode in RCVD fields
  • Enable Morse Runner simulation
  • Prefill field values - callsign
  • Enable grab call from decoder window in digi mode
Retrieved from "https://dxlog.net/docs/index.php?title=Menu_Tools&oldid=608"