#
# DXLog.net contest definition file
# Updated 2026-07-31
#
CONTESTNAME=RSGB International Low Power Contest
CONTESTWEB=http://www.rsgbcc.org
CONTESTRULES=https://www.rsgbcc.org/cgi-bin/hfcontest_rules.pl?contest=LPFD

BANDS=80;40;20
MODES=CW
CATEGORIES=Single operator, assisted;Single operator, unassisted
CATEGORY_MODES=CW
CLASS=More than 10W RF output;Up to 10W RF output;Up to 5W RF output

CFG_MULT=ON
CFG_MULT_RGX_CHECK=^(QRO|10W|[1-9]W[0-9]?|0W[0-9]{1,3})$
CFG_MULT_ERRORTEXT=Enter your transmit power as one to four digits plus 'W'\nin place of the decimal point, (eg. 9W, 5W5, 0W01, etc.).\nParticipants using more than 10W enter 'QRO'.
CFG_MULT_DX_ALLOWED=NO

# Allow self spotting
SELF_SPOT_ALLOWED=YES;NO

# Dupe rule
DOUBLE_QSO=PER_BAND

# Scoring
POINTS_TYPE=CALC
POINTS_FIELD_BAND_MODE=ALL;DEST->CALL:/[MP]$;ALL;CW;15;!DEST->RECINFO:^QRO$
POINTS_FIELD_BAND_MODE=ALL;DEST->RECINFO:W;ALL;CW;10
POINTS_FIELD_BAND_MODE=ALL;ALL;ALL;CW;5

# Summary
SCORE_DISPLAY=BAND;QSO;DUP;POINTS;AVG1(AVG)

# Support file
WARNING_FILE=RSGB_LPC_warning.txt

# Cabrillo export
CABRILLO_CONTEST_NAME=RSGB-LOW-POWER
CABRILLO_MODES=CW
CABRILLO_POWER_SPECIAL=QRO;10W;5W
LIVESCORE_POWER=HIGH;LOW;QRP
CABRILLO_OPERATOR=SINGLE-OP;SINGLE-OP
CABRILLO_TRANSMITTER=ONE;ONE
CABRILLO_ASSISTED=ASSISTED;NON-ASSISTED
CABRILLO_BAND=ALL
CABRILLO_LINE=FREQ;MODE;DATE;TIME;MYCALL;SENT;NR{F=R,3,0,4};EXCHANGE;CALL;RCVD1;RCVD2{F=R,3,0,4};*RGX:!DEST->RECINFO:^$>>RECINFO/'--

# ADIF export
ADIF_KEYS=STX_STRING;$SERIAL+" "+$EXCHANGE;!CONFIG->EXCHANGE:^DX$
ADIF_KEYS=STX_STRING;$SERIAL;CONFIG->EXCHANGE:^DX$

# Log fields
FIELD_NR_VISIBLE=YES
FIELD_MULT_VISIBLE=NO

FIELD_RCVD_NUMERIC=YES
FIELD_RCVD_MANDATORY=YES
FIELD_RCVD_COPY=NO
FIELD_RCVD_TYPE=NR
FIELD_RCVD_NAME=Rcv Nr
FIELD_RCVD_MAX_LENGTH=7

FIELD_RECINFO_VISIBLE=YES
FIELD_RECINFO_NUMERIC=NO
FIELD_RECINFO_MANDATORY=YES
FIELD_RECINFO_COPY=YES
FIELD_RECINFO_TYPE=CUSTOM
FIELD_RECINFO_NAME=Pwr
FIELD_RECINFO_MAX_LENGTH=5

# CW Messages
CW_MESSAGE_1=CQ $MYCALL $MYCALL TEST
CW_MESSAGE_2=$RST $SERIAL $EXCHANGE
CW_MESSAGE_3=$SERIALNOAB $EXCHANGENOAB
CW_MESSAGE_4=$MYCALL
CW_MESSAGE_5=$LOGGEDCALL
CW_MESSAGE_6=AGN?
CW_MESSAGE_7=?
CW_MESSAGE_INS=$LOGGEDCALL $F2
CW_MESSAGE_PLUS=$CORRECT TU $CR $MYCALL