[DXLog.net - Support] TS-790 (144/432/1296) & CAT - strange

[9A5K]

Hi Igor.

I've checked a bit informations regarding TS-790.
According to info I've found on the net, it seems that TS-790 has a little
bit different set of CAT commands available.
For sure, I have to investigate a little bit more, but from this what you
wrote, it seems that radio isn't responding on the same way
as other Kenwood radios, at least for FA/FB query commands.

I'll be back with more info as soon as there will be any.

73,
Chris - 9A5K




On Tue, Sep 17, 2013 at 6:16 AM, Blinov Igor <rw3xl at yandex.ru> wrote:

> Good day!
> I connect my TS-790 with CAT and try to play band switching. First
> attempts is good. I change band in program and TS jump to selected band
> without problem. If I change band in TS no band chage in DXLog, it's sad.
> After several switchings from program band in DXLog froze in 1296MHz band.
> If I type 144, TS jump to 144MHz, program write 144 in band field, but
> after about 1 sec changed to 1296MHz again. Transciever still on 144. The
> same story if I type 432MHz - transciever jump to 432 with program, but
> programm return to 1296 after second or less.
> Of course, TS-790 have two independent receiver, but if to tune only main,
> or only active it will be usable.
> ---
> 73! Igor, RW3XL
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support
>