[DXLog.net - Support] DXLOG stops talking to radio OM2500 and FTDX-5000?

[9A5K]

Hi Rich..

Can you check, when this happens, does DXLog.net process in Task manager is
running with high CPU usage?
If this is the case, I know where is the problem. There was similar
situation with ICOM, so this can be easily fixed.




On Wed, Apr 30, 2014 at 10:22 PM, Rich Hallman - N7TR <rich at n7tr.com> wrote:

> I have a unique setup and wanted to see if anyone else has the same
> configuration and seeing what I am seeing.
> I am seeing with DXlog on two different stations the same issue.  I have
> the FTDX5000 with a OM2500 on each station.   With Win-Test I do not see
> any problems.
> What I am seeing is with the same RS232 serial port setup, the DXlog
> software will track and communicate with the radio no problem when I first
> start the software or when I check any serial port setting.  After a minute
> or so, DXlog stops talking to the radio.  The configuration is that the
> OM2500 connects to the radio and the computer connects to the amps rs232
> port.  I have tried RTS/DTR settings and changed baud settings, but it
> still works ok for a period of time then just stops talking to the radio.
>  When I connect the computer directly to the radio, all works fine.   I
> would then think there might be a problem with the OM2500, but when I use
> WIN-TEST (and even HRD) I have no issues, but with DXlog I do.
> Any thoughts?   Does Win-Test handle the serial port settings different
> then DXLog?  Thanks...
> Rich N7TR
> ex KI3V, N3AMK, WB3JOV
> www.n7tr.com<http://www.n7tr.com>
> http://www.qrz.com/db/N7TR
> Telnet: dxc.n7tr.com N7TR DXCluster
>
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support
>