[DXLog.net - Support] Contest Definition for MULT1 - Not allowing own multiplier?

[9A5K]

Hi Ingo.

There is a keyword OWN_MULT_VALID which control this behavior.

Try to add this line:

OWN_MULT_VALID=NO

73,
Chris - 9A5K

On Mon, Apr 18, 2016 at 5:24 PM, SM5AJV <sm5ajv at qrq.se> wrote:

> Hi!
>
> I am trying to make a custom contest definition for the Swedish domestic
> contest SSA Månadstest and have got almost everything working. See
> configuration at the bottom.
> The contest rules says, that your own GRID is not counted as a multiplier.
> How do I make dxlog to reject my own multiplier?
>
> The Exchange in the contest is:
>
>   RST SERIAL-NUMER LOCATOR
>
> Example:
>   599 013 JO89LW
>
> You get 2 points for each QSO and a multiplier for each GRID, i.e. first 4
> positions in the received locator on each band
>
> Example:
> If I am in JO89LW and receives 599 011 JO89JH from SM5XYZ, the JO89 should
> NOT be counted as a multiplier.
>
>
>
> 73
> Ingo SM5AJV / SE5E
>
>
>
>
>
> FILE: SSA_MT.txt
> #
> # DXLog.net contest definition file
> #
> CONTESTNAME=SSA MT
> BANDS=80;40
> MODES=CW;SSB
> CABRILLO_MODES=CW;PH
> DOUBLE_QSO=PER_BAND
> POINTS_TYPE=CALC
>
> CFG_MULT=ON
> CFG_GRID_MANDATORY=YES
>
> POINTS_FIELD_BAND_MODE=ALL;DEST->DXCC:^$;ALL;ALL;-1
>
> POINTS_FIELD_BAND_MODE=!SOURCE->CONT:^EU$;!DEST->CONT:^EU$;ALL;ALL;-1
> #POINTS_FIELD_BAND_MODE=ALL;ALL;ALL;ALL;2
> POINTS_FIELD_BAND_MODE=SOURCE->DXCC:^SM$;DEST->DXCC:^SM$;ALL;ALL;2
>
> SCORE=BY_BAND
> SCORE_DISPLAY=BAND;QSO;DUP;MULT1(GRID);POINTS;AVG
>
> DXCC_DB_TYPE=CTY
> DXCC_DB_FILENAME=CTY.DAT
>
> #
> # MULTS DEFINITIONS
> #
>
> MULT1_TYPE=FX
> MULT1_FIELD=RECINFO
> MULT1_DISPLAY=MULT
> MULT1_COUNT=PER_BAND
> MULT1_FX=$FIELDVALUE.Substring(0,4)
>
> CABRILLO_CONTEST_NAME=SSA-MT
> CABRILLO_LINE=FREQ{F=R,6, };MODE{F=L,3, };DATE;TIME;MYCALL{F=L,13,
> };SENT{F=L,3, };NR{F=R,4, };GRID{F=L,6, };CALL{F=L,13, };RCVD1{F=L,4,
> };RCVD2{F=R,4, };RECINFO
>
> WINDOWS_CML_ENABLED=NO
> WINDOWS_WKD_DXCC_ENABLED=NO
> WINDOWS_WKD_GRID_ENABLED=NO
>
> # Fields definition
> FIELD_PERIOD_VISIBLE=NO
> FIELD_NR_VISIBLE=YES
> FIELD_RCVD_NUMERIC=YES
> FIELD_RCVD_MANDATORY=YES
> FIELD_RCVD_COPY=NO
> FIELD_RCVD_TYPE=NR
> FIELD_RECINFO_VISIBLE=YES
> FIELD_RECINFO_NAME=Loc.
> FIELD_RECINFO_MANDATORY=YES
> FIELD_RECINFO_MAX_LENGTH=6
> #FIELD_RECINFO_RGX_CHECK=DEST->RCVD:^[A-R][A-R][0-9][0-9][A-R][A-R]$
> FIELD_AZ_VISIBLE=NO
> FIELD_MULT_VISIBLE=YES
>
> # CW Messages
> CW_Message_1 = TEST $MYCALL $MYCALL
> CW_Message_2 = $SERIAL $EXCHANGE
> CW_Message_3 = $SERIAL $EXCHANGE
> CW_Message_4 = $MYCALL
> CW_Message_5 = $LOGGEDCALL
> CW_Message_6 = NR?
> CW_Message_7 = ?
> CW_Message_INS = $LOGGEDCALL $F2
> CW_Message_PLUS = $CORRECT ++TU-- $CR $MYCALL
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support
>