[DXLog.net - Support] New Scripts for K3 S02V support

[Marco HB9CAT]

Olli,

The 3 scripts work flawlessly, they actually gave me the opportunity to get
a better understanding of how scripting works, thank you !

I did not dig deeper in the open issues, I may do so as I'll get some more
time

Best 73
Marco HB9CAT

-----Original Message-----
From: support-bounces at dxlog.net [mailto:support-bounces at dxlog.net] On Behalf
Of Oliver Grossmann
Sent: venerdì, 15. gennaio 2016 22:25
To: Support at dxlog.net
Subject: Re: [DXLog.net - Support] New Scripts for K3 S02V support

Hi Marco,

looking for your feedback on the weekend. I'm still struggling with the
SPLIT issue on the K3.

I tried some stuff, but couldn't realized my ideas. Basic operation what is
needed for TX on Sub Receiver is swapping VFOs on radio and swap VFOs in
DXLog.

An example:
Main RX on 20m, Sub RX on 15m, TX on 20m, listen for Multi on 15. By setting
focus to sub receiver with Split enable, K3 will still TX on 20 due to
internal limitations.
If I just swap Main and Sub RX it will work on K3, but entrylines, bandmaps
etc. will also swap in DXLog. If it is possible to swap also VFO A and VFO B
in DXLog, it would work.

This isn't a real feature and should be available only in scripts, but could
solve this odd behavior of the K3.
 
73, Olli


Am 14.01.2016 um 08:55 schrieb Marco HB9CAT:
> Great job Olli, I'll try it out on the weekend.
>
> Marco HB9CAT
>
> -----Original Message-----
> From: support-bounces at dxlog.net [mailto:support-bounces at dxlog.net] On 
> Behalf Of Oliver Grossmann
> Sent: martedì, 5. gennaio 2016 15:20
> To: Support at dxlog.net
> Subject: Re: [DXLog.net - Support] New Scripts for K3 S02V support
>
> Thanks fer info,
> there is a tiny bug in the description:
>
> ogK3_ListenBothVFO.cs will switch K3 to listen Main RX on left and Sub 
> RX on right stereo channel.
>
> should be right.
>
> 73, Olli
>
> Am 04.01.2016 um 20:56 schrieb Oliver Grossmann:
>> Now with attached files as *.txt file, *.cs files are filtered.
>>
>> Olli, DH2WQ
>>
>> ---------------------------------------------------------------------
>> -
>> -- Oliver Grossmann | DH2WQ | oliver.grossmann at bretzi.de Hi,
>>
>> happy new year to all.
>>
>> I wrote 3 scripts for K3 Audio switching for SO2V Operation.
>> please refer to attached files.
>>
>> K3_ListenBothVFO.cs will switch K3 to listen Main RX on Right and Sub 
>> RX on left stereo channel.
>>
>> K3_ListenPrimaryVFO.cs will switch Main VFO to both stereo channels.
>>
>> K3_ListenSecondaryVFO.cs will switch Sub VFO to both Stereo channels.
>>
>> I also worked on a VFO switching for SO2V Mode on the K3 with limited 
>> success.
>>
>> I was able to add TX on 2nd RX by setting cdata.UseSPLITTInSO2V = 
>> true; but this works only on the same band due to the fact the K3 
>> can't transmit on 2nd VFO if both VFOs are on the same band.
>>
>> I'm now looking for a possibility to swap VFOs on K3 by focusing on 
>> Radio 2 Entry over all bands. Therefore it is necessary to link VFO 
>> to
>> R2 focus.
>>
>> I would handle the cdata.RadioTCStatusChanged event in such a manner:
>>
>> // (Only pseudo code and handling of first start etc has to be added) 
>> //
>>
>> If (cdata.FocusedRadio == 1)
>> {
>>     double copyVFOAFreq = VFOAFreq;
>>     double copyVFOBFreq = VFOBFreq;
>>
>>     setVFOAFreq(copyVFOBFreq);
>>     setVFOBFreq(copyVFOAFreq);
>>
>>     LinkVFOA(Radio_1);
>> }
>> else if (cdata.FocusedRadio == 2)
>> {
>>     double copyVFOAFreq = VFOAFreq;
>>     double copyVFOBFreq = VFOBFreq;
>>
>>     setVFOAFreq(copyVFOBFreq);
>>     setVFOBFreq(copyVFOAFreq);
>>
>>     LinkVFOA(Radio_2);
>> }
>>
>> My Problem is LinkVFOA();
>> Can I somehow redirect the CAT objects like frequencies or is it 
>> necessary to manipulate?
>>
>> Thanks
>> Olli, DH2WQ
>>
>>
>>
>> _______________________________________________
>> Support mailing list
>> Support at dxlog.net
>> http://www.dxlog.net/mailman/listinfo/support
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support
>

_______________________________________________
Support mailing list
Support at dxlog.net
http://www.dxlog.net/mailman/listinfo/support