[DXLog.net - Support] Missing from DXL for RTTY mode

[Peter Helfenstein]

James, Marco,
For me Marco's point "N1MM is actually opening a separate window for VFO 
B in SO2V mode, that is actually even more confusing as I have to use 
the mouse to select the 2nd window before entering anything."
is key and an important differentiator to N1MM. It is a lot 
easier/reducing stress jumping from VFO to VFO pressing a key instead of 
clicking the mouse!
And with the new "SPLIT mode" in 2.2.17 SO2V also runs on the FT-2000! 
Many thanks Chris.
Good luck and see you all in the contest!
73, Peter - HB9BUN



------------------------------
Message: 5
Date: Thu, 24 Sep 2015 08:52:04 +0200

From: "Marco HB9CAT" <hb9cat at thezollingers.org>
To: "'James Balls'" <makidoja at gmail.com>, <support at dxlog.net>

Subject: Re: [DXLog.net - Support] Missing from DXL for RTTY mode

James,
>>> it's not an option as you then get 2 log entry lines and it becomes
> confusing
>
> Getting 2 log entry lines is actually exactly what I'm looking for while
> running SO2R (same for SO2V), as it allows me to manage 2 different QSOs
> concurrently; it may indeed look confusing, but that's the price to pay to
> increase the rate.
>
> N1MM is actually opening a separate window for VFO B in SO2V mode, that is
> actually even more confusing as I have to use the mouse to select the 2nd
> window before entering anything.
>
> Diversity: if you're referring to the specific K3 functionality, the audio
> stream becomes Mono as you turn it on (the sub RX QRG matches the main RX)
> so you would have have a single VFO with max 4 decoders on the same audio
> stream and a single entry window.
>
> Generally: I agree that right now N1MM still has a distinct advantage on
> RTTY
>
> 73s, Marco HB9CAT
>
> -----Original Message-----
> From: support-bounces at dxlog.net [mailto:support-bounces at dxlog.net] On Behalf
> Of James Balls
> Sent: mercoled?, 23. settembre 2015 16:54
> To: support at dxlog.net
> Subject: [DXLog.net - Support] Missing from DXL for RTTY mode
>
> Hi Chris / All
>
> >From an RTTY stance I think N1MM has a distinct advantage over DXL for RTTY
> in the MS category
>
> Missing for me is the option to have upto 4 RX decoders per receiver but in
> the same window.
>
> Also I would like to have the main and sub VFO in separate windows, at the
> moment the only way to do this is by having SO2R or SO2V option enabled, but
> for multi single it's not an option as you then get 2 log entry lines and it
> becomes confusing.
>
> I would like to have the option of decoding both main and sub receivers with
> upto 4 decoders per receiver, all in the two decoder windows with dividers
> between them (like N1MM)
>
> OR 6 decoders in the same window which would work for diversity mode.
>
> This would allow me to stack and work anything I hear with the K3 in
> diversity RX mode as we often use 2 different antennas at the same time with
> the dual receivers and diversity on.
>
> Is this something that could be implemented please?
>
> I really wanted to use DXL for CQWW RTTY but the limitation above means I
> have to use N1MM + which i'm not keen on.
>
> Jim M0CKE
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support
>
>
>
>
> ------------------------------
>
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support
>
>
> End of Support Digest, Vol 28, Issue 8
> **************************************