[DXLog.net - Support] CW keying locks up

[Ken K6MR]

One thing to always check when you have a USB interface issue: be sure that the USB controller/port has the power saving mode turned off. If the port goes to sleep it can cause all kinds of weird things to happen.

Ken K6MR

From: Iain Kelly<mailto:iain at m0pcb.co.uk>
Sent: Sunday, January 24, 2016 10:34
To: Support at dxlog.net<mailto:Support at dxlog.net>
Subject: [DXLog.net - Support] CW keying locks up

Good evening,

I've used DXlog in a couple of CW contests this year after recently buying
a licence. I am very impressed, had everything set up swiftly and I've only
hit one snag so far.

During AFS CW contest I had the CW keying lock up a couple of times, i.e.
hitting enter or any other keying key didn't send anything. This happened,
but only once, this weekend in UKEICC DX CW.

I found that hitting 'esc' a few times cleared the problem and computer
keying worked fine.

Using the winkey chip in a Microham u2r controller.

73, Iain M0PCB
_______________________________________________
Support mailing list
Support at dxlog.net
http://www.dxlog.net/mailman/listinfo/support