[DXLog.net - Support] DXLog.net version 2.3.5 is available

[Filipe Lopes]

For info, I have bought a couple of there and they work pretty well:

https://www.amazon.com/dp/B0055CRAF6/ref=cm_cr_ryp_prd_ttl_sol_0


73's Filipe Lopes
CT1ILT - CR6K
F4VPX - TM3M

2016-06-08 18:03 GMT+02:00 Bob Wilson, N6TV <n6tv at arrl.net>:

> Are you using a Prolific USB-to-Serial adapter?  Check the driver name in
> the Windows Device Manager.  Many Prolific adapters do not work.  FTDI
> adapters such as the GearMo brand are much more reliable than Prolific.
>
> The symptom you describe is consistent with my observation that some
> USB-to-Serial adapters require RTS or DTR to be set to "Always ON" or
> "High" to supply consistent power to the adapter before they will properly
> poll the radio.
>
> 73,
> Bob, N6TV
>
> On Wed, Jun 8, 2016 at 2:21 AM, Bernd DL8BH Kneip <dxlog at dl8bh.de> wrote:
>
> > Hi,
> >
> > Am 27.05.2016 um 08:21 schrieb 9A5K:
> > > - Support for Yaesu FT-920 implemented.
> >
> > I tested the FT-920 support during the last contests, but its only half
> > working: communication from dxlog to the radio works fine (setting
> > frequency/mode…), but the other direction does not work (and the CAT
> > sign in the radios display does not show up).
> > CAT works fine with dxlog using omnirig or in other programs on this
> radio!
> >
> > Thanks for the effort done so far,
> >
> > Bernd DL8BH
> > _______________________________________________
> > Support mailing list
> > Support at dxlog.net
> > http://www.dxlog.net/mailman/listinfo/support
> >
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support
>