[DXLog.net - Support] An extra DAH when stacking CQ's on other radio

[9A5K]

Hi Ingo.

I will check this later today to confirm the issue as well here.
If I've got it correctly, it seems that extra letter isn't cleared
correctly from the buffer, and it is sent to
transceiver.

73,
Chris - 9A5K


On Mon, May 9, 2016 at 9:30 PM, SM5AJV <sm5ajv at qrq.se> wrote:

> Update:
>
> During the weekends ARI contest I could repeat the problem
> and also confirm that the extra "T" actually was sent from DxLog by using
> the microHam monitor application for WinKeyer.
>
> I would like to get this solved and it seems that it is some sort of timing
> or interlock issue here? When using Alternating CQ there is no problem, but
> there is also a noticeable delay between the two CQ's.
>
> I also tried to increase the baud rate to WinKey from 1200 bps to 9600,
> but the trouble remained.
>
> As I mentioned earlier, the set-up of messages in the scenario are:
> F1: $RESET $TR1 $R1R2 $F1 $R1R2
> F6: $RESET $TR2 $R1R2 $F1 $R1R2
>
>
> 73
> Ingo SM5AJV
>
>
>
>
>
> 2016-05-01 22:58 GMT+02:00 SM5AJV <sm5ajv at qrq.se>:
>
> > I have tried both with and without, but didn't notice any difference.
> >
> > 73
> > Ingo SM5AJV / SE5E
> > Den 1 maj 2016 22:55 skrev "James Balls" <makidoja at gmail.com>:
> >
> >> Do you have double buffer set for Winkeyer in DXL?
> >> On 1 May 2016 21:27, "SM5AJV" <sm5ajv at qrq.se> wrote:
> >>
> >> Sorry, I just forgot!
> >>
> >> I am using a microHam MK2R+ with the latest FW/SW.
> >>
> >>
> >> 73
> >> Ingo SM5AJV
> >>
> >>
> >> 2016-05-01 22:02 GMT+02:00 James Balls <makidoja at gmail.com>:
> >>
> >>> What is your SO2R hardware please ?
> >>>
> >>> Jim M0CKE
> >>> On 1 May 2016 18:25, "SM5AJV" <sm5ajv at qrq.se> wrote:
> >>>
> >>>> I am playing with SO2R set-up..
> >>>>
> >>>> Here is some parts of my Scenario set-up:
> >>>>
> >>>> F1: $RESET $TR1 $R1R2 $F1 $R1R2
> >>>> F6: $RESET $TR2 $R1R2 $F1 $R1R2
> >>>>
> >>>> When I am manually trying to send alternating CQ's an
> >>>> extra DAH is sometimes sent on the next CQ:
> >>>>
> >>>> Push F1 to call CQ on RADIO 1:     TEST SE5E
> >>>> directly after the CQ is sent I push F6 to call CQ on RADIO 2: T TEST
> >>>> SE5E
> >>>>
> >>>> This happen if I push the F6 quickly after F1 message is finnished.
> >>>> If I wait a while, the extra DAH is not sent.
> >>>>
> >>>> I have also tried to put in an extra space in the F1 message and then
> >>>> the problem disappears. But an extra space will make the CQ too
> >>>> sluggish.
> >>>>
> >>>> Any ideas what's going on?
> >>>>
> >>>>
> >>>> 73
> >>>> Ingo SM5AJV / SE5E
> >>>> _______________________________________________
> >>>> Support mailing list
> >>>> Support at dxlog.net
> >>>> http://www.dxlog.net/mailman/listinfo/support
> >>>>
> >>>
> >>
> _______________________________________________
> Support mailing list
> Support at dxlog.net
> http://www.dxlog.net/mailman/listinfo/support
>